.30-06 Springfield

Source: Wikipedia, the free encyclopedia.
"30.06" redirects here. For the "30.06 sign" in Texas gun law, see Gun laws in Texas § 30.06 signage. For similar names, see 3006.
.30-06 Springfield
.30-03 Springfield
Case typeRimless, straight walled, bottleneck
Bullet diameter.308 in (7.82 mm)[1]
Land diameter.300 in (7.6 mm)
Neck diameter.340 in (8.6 mm)
Shoulder diameter.441 in (11.2 mm)
Base diameter.471 in (12.0 mm)
Rim diameter.473 in (12.0 mm)
Rim thickness.049 in (1.2 mm)
Case length2.494 in (63.3 mm)
Overall length3.34 in (85 mm)
Case capacity68 gr H2O (4.4 cm3)
Rifling twist1 in 10 in (250 mm)
Primer typeLarge rifle
Maximum pressure (C.I.P.)58,740 psi (405.0 MPa)
Maximum pressure (SAAMI)60,000 psi (410 MPa)
Maximum CUP50,000[2] CUP
Ballistic performance
Bullet mass/type Velocity Energy
150 gr (10 g) Nosler Ballistic Tip 2,910 ft/s (890 m/s) 2,820 ft⋅lbf (3,820 J)
165 gr (11 g) BTSP 2,800 ft/s (850 m/s) 2,872 ft⋅lbf (3,894 J)
180 gr (12 g) Core-Lokt Soft Point 2,700 ft/s (820 m/s) 2,913 ft⋅lbf (3,949 J)
200 gr (13 g) Partition 2,569 ft/s (783 m/s) 2,932 ft⋅lbf (3,975 J)
220 gr (14 g) RN 2,500 ft/s (760 m/s) 3,036 ft⋅lbf (4,116 J)
Test barrel length: 24 inch (61 cm)
Source(s): Federal Cartridge[3] / Accurate Powder[4]

The .30-06 Springfield

cartridge (pronounced "thirty-aught-six" IPA [ˈθɝɾi ɔt sɪks]), 7.62×63mm in metric notation, and called the .30 Gov't '06 by Winchester,[5] was introduced to the United States Army in 1906 and later standardized; it remained in military use until the late 1970s. In the cartridge's name, ".30" refers to the nominal caliber of the bullet in inches; "06" refers to the year the cartridge was adopted, 1906. It replaced the .30-03 Springfield, 6mm Lee Navy, and .30-40 Krag cartridges. The .30-06 remained the U.S. Army's primary rifle and machine gun cartridge for nearly 50 years before being replaced by the 7.62×51mm NATO and 5.56×45mm NATO
, both of which remain in current U.S. and NATO service. The cartridge remains a very popular sporting round, with ammunition produced by all major manufacturers.

History

In the early-1890s, the U.S. military adopted the smokeless powder .30-40 Krag rimmed cartridge. The 1894 version of that cartridge used a 220-grain (14 g) round-nose bullet. Around 1901, the U.S. started developing an experimental rimless cartridge for a Mauser action with a box magazine. That led to the 1903 .30-03 Springfield rimless service round that used the same 220-grain (14 g) round-nose bullet as the Krag.[6] The .30-03 achieved a muzzle velocity of 2,300 ft/s (700 m/s).[citation needed]

Many European militaries at the beginning of the 20th century were adopting lighter-weight (roughly 150-to-200-grain (9.7 to 13.0 g)), higher velocity, service rounds with

.30-03 service cartridge was falling behind.[8]

Cartridge, ball, caliber .30, Model of 1906 (M1906)

For these reasons, the U.S. military developed a new, lighter cartridge in 1906, the .30-06 Springfield, "cartridge, ball, caliber .30, Model of 1906", or just M1906. The .30-03 case was modified to have a slightly shorter neck to fire a spitzer flat-based 150-grain (9.72 g) bullet that had a

M1903 Springfield rifle, which had been introduced alongside the .30-03 cartridge, was modified to accept the new .30-06 Springfield cartridge. Modifications to the rifle included shortening the barrel at its breech and resizing the chamber, so that the more tapered bullet would not have to jump too far to reach the rifling. Other changes to the rifle included the elimination of the troublesome "rod bayonet" of the earlier Springfield rifles.[citation needed
]

The M1906 maximum range was originally overstated. When the M1906 cartridge was developed, the range tests had been done to only 1,800 yards (1,650 m); distances beyond that were estimated, but the estimate for extreme range was incorrect by almost 40 percent.[10] The range discrepancy became evident during World War I. Before the widespread employment of light mortars and artillery, long-range machine gun "barrage" or indirect fires were considered important in U.S. infantry tactics.[11] When the U.S. entered World War I, it did not have many machine guns, so it acquired British and French machine guns. When those weapons were later replaced with U.S. machine guns firing the M1906 round, the effective range of the barrage was 50 percent less.[12] Firing tests performed around 1918 at Borden Brook Reservoir (Massachusetts), Miami, and Daytona Beach showed the actual maximum range of the M1906 cartridge to be 3,300 to 3,400 yards (3,020 to 3,110 m).[13] Germany, which was using the S Patrone (S ball cartridge) loaded with a similar 153-grain (9.9 g) flat-based bullet in its rifles, had apparently confronted and solved the same problem by developing an aerodynamically more refined bullet for long-range machine gun use. The s.S. Patrone was introduced in 1914 and used a 197.5-grain (12.80 g) s.S. – schweres Spitzgeschoß (heavy spitzer) boat-tail bullet which had a maximum range of approximately 5,000 m (5,468 yd).[14]

.30 M1 ball cartridge

For these reasons, in 1926, the ordnance corps, after extensive testing of

air resistance in flight, resulting in less rapid downrange deceleration, less lateral drift caused by crosswinds, and significantly greater supersonic and maximum effective range from machine guns and rifles alike.[18] Additionally, a gilding metal
jacket was developed that all but eliminated the metal fouling that plagued the earlier M1906 cartridge. The loaded round weighed 420 grains (27 g) and its maximum range was approximately 5,500 yd (5,030 m).[18] The maximum average pressure (MAP) was 48,000 psi (330.95 MPa). The average target radius was specified to be not greater than 4.5 in (11 cm) at 500 yd (457 m) and not greater than 5.5 in (14 cm) at 600 yd (549 m) when fired from a Mann accuracy weapon.[19][20]

Cartridge, caliber .30, ball, M2

Wartime surplus totaled over two billion rounds of ammunition. Army regulations called for training use of the oldest ammunition first. As a result, the older .30-06 ammunition was expended for training; stocks of .30 M1 ball ammunition were allowed to slowly grow until all of the older M1906 ammunition had been fired. By 1936, it was discovered that the maximum range of the .30 M1 ball ammunition with its boat-tailed spitzer bullets was beyond the safety limitations of many military firing ranges. An emergency order was made to manufacture quantities of ammunition that matched the external ballistics of the earlier M1906 cartridge as soon as possible. A new cartridge was developed in 1938 that was essentially a duplicate of the old M1906 round, but loaded with IMR 4895 propellant and a new flat-based bullet that had a gilding metal jacket and a different lead alloy, and weighed 152 grains (9.85 g) instead of 150 grains (9.72 g). This 1938 pattern cartridge, the cartridge, caliber .30, ball, M2, achieved a muzzle velocity of 2,805 ft/s (855 m/s) and muzzle energy of 2,656 ft⋅lbf (3,601 J).[17] The loaded round weighed 416 grains (27.0 g) and its maximum range was approximately 3,450 yd (3,150 m).[18] The MAP was 50,000 psi (344.74 MPa). The average target radius was specified to be not greater than 6.5 in (16.5 cm) at 500 yd (457 m) and not greater than 7.5 in (19.1 cm) at 600 yd (549 m).[19]

Firearms

M1 Garand 30-06. Note the ammunition clip at 12 o'clock. It is ejected from the rifle after all eight rounds have been fired.
A Winchester Model 70 Super Grade hunting rifle in .30-06 with Leupold 6×42 scope

In military service, the .30-06 was used in the

Vietnam war.[citation needed
]

The Belgian army (ABL) bought the FN Model 1949 rifle in .30-06 caliber (both as a sniper version with telescopic sights and as a general service weapon). The Belgian armed forces used the round widely in the Korean war, where the .30-06 caliber FN-49 proved to be a superior weapon in terms of both accuracy and reliability to the American M1 Garand. The .30-06 FN-49 saw widespread use in the various wars in and around the Belgian Congo. The 30-06 FN-49 was also sold to the armies of Luxembourg, Indonesia, and Colombia. Another customer was Brazil where it served the navy.[citation needed]

Large volumes of surplus

wildcat cartridges, as well as being extensively used for reloading. In 1908 the Model 1895 Winchester lever-action rifle became the first commercially-produced sporting rifle chambered in .30-06 Springfield. It is still a very common round for hunting and is suitable for large game such as bison, Sambar deer, and bear, when used at close to medium ranges.[citation needed
]

In 1903, the Army converted its M1900

.30-03 cartridge as the M1903. The later M1903-'06 was an M1903 converted to .30-06. This conversion was principally carried out at the Army's Springfield Armory arsenal repair shops. All models of Gatling guns were declared obsolete by the U.S. Army in 1911, after 45 years of service.[21]

With "hot"

firearms chambered for it and demand for commercial ammunition) have kept the round as one of the most popular for hunting in North America.[citation needed
]

Performance

The .30-06 cartridge was designed when shots of 1,000 yards (914.4 m) were expected. In 1906, the original M1906 .30-06 cartridge consisted of a 150 grains (9.7 g), flat-base

6.5×50mm Arisaka cartridge and comparable to the Japanese 7.7×58mm Arisaka. The new M1 ammunition proved to be significantly more accurate than the M1906 round.[22]

In 1938, the unstained, 150 grains (9.7 g), flat-base bullet combined with the .30-06 case became the M2 ball cartridge. The M2 ball specifications required 2,740 feet per second (835.2 m/s) minimum velocity, measured 78 feet (24 m) from the muzzle.

U.S. Marine Corps retained stocks of M1 ammunition for use by snipers and trained marksmen throughout the Solomon Islands campaign in the early years of the war.[24]

In an effort to increase accuracy, some snipers resorted to use of the heavier .30-06 M2 armor-piercing round, a practice that re-emerged during the Korean War. Others sought out lots of M2 ammunition produced by Denver Ordnance, which had proved to be more accurate than those produced by other wartime ammunition plants when used for sniping at long range.[25] With regards to penetration, the M2 AP round[26] can penetrate at least 0.42 in (10.67 mm) of armor steel at 100 yards (91 m). A test done by Brass Fetchers shows that M2 AP can actually penetrate up to 0.5 in (12.70 mm) of MIL-A-12560 armor steel from a distance of 100 yards (91 m). The round struck the plate at a velocity of 2,601 fps and made a complete penetration.[27]

Winchester .30-06 cartridge
6.5×55mm and .308 Winchester
Eight .30-06 cartridges loaded in an en bloc clip for the M1 Garand

Commercially manufactured rifles chambered in .30-06 are popular for hunting. Current .30-06 factory ammunition varies in bullet weight from 7.1 to 14.3 grams (110 to 220 grains) in solid bullets, and as low as 3.6 grams (55 grains) with the use of a sub-caliber bullet in a sabot.[28] Loads are available with reduced velocity and pressure as well as increased velocity and pressure for stronger firearms. The .30-06 remains one of the most popular sporting cartridges in the world. Many hunting loads have over 3,000 foot-pounds (4,100 J) of energy at the muzzle and use expanding bullets that can deliver rapid energy transfer to targets.[citation needed]

Bullet weight Federal[29] Hodgdon[30] Speer[31] Hornady[32] Nosler[33] Barnes[34]
110 gr (7.1 g) N/A 3,505 ft/s (1,068 m/s) 3,356 ft/s (1,023 m/s) 3,500 ft/s (1,067 m/s) N/A 3,471 ft/s (1,058 m/s)
125–130 gr (8.1–8.4 g) 3,140 ft/s (957.1 m/s) 3,334 ft/s (1,016 m/s) 3,129 ft/s (953.7 m/s) 3,200 ft/s (975.4 m/s) 3,258 ft/s (993.0 m/s) 3,278 ft/s (999.1 m/s)
150 gr (9.7 g) 2,910 ft/s (887.0 m/s) 3,068 ft/s (935.1 m/s) 2,847 ft/s (867.8 m/s) 3,100 ft/s (944.9 m/s) 3,000 ft/s (914.4 m/s) 3,031 ft/s (923.8 m/s)
165 gr (10.7 g) 2,800 ft/s (853.4 m/s) 2,938 ft/s (895.5 m/s) 2,803 ft/s (854.4 m/s) 3,015 ft/s (919.0 m/s) 3,002 ft/s (915.0 m/s) 2,980 ft/s (908.3 m/s)
180 gr (11.7 g) 2,700 ft/s (823.0 m/s) 2,798 ft/s (852.8 m/s) 2,756 ft/s (840.0 m/s) 2,900 ft/s (883.9 m/s) 2,782 ft/s (848.0 m/s) 2,799 ft/s (853.1 m/s)
200 gr (13.0 g) N/A 2,579 ft/s (786.1 m/s) 2,554 ft/s (778.5 m/s) N/A 2,688 ft/s (819.3 m/s) 2,680 ft/s (816.9 m/s)
220 gr (14.3 g) 2,400 ft/s (731.5 m/s) 2,476 ft/s (754.7 m/s) N/A 2,500 ft/s (762.0 m/s) 2,602 ft/s (793.1 m/s) 2,415 ft/s (736.1 m/s)

The table above shows typical muzzle velocities available in commercial 30-06 loads along with the maximum .30-06 muzzle velocities reported by several reloading manuals for common bullet weights. Hodgdon, Nosler, and Barnes report velocities for 24 inches (610 mm) barrels. Hornady and Speer report velocities for 22 inches (560 mm) barrels. The data are all for barrels with a twist rate of 1 turn in 10 inches (250 mm) which is needed to stabilize the heaviest bullets. The higher muzzle velocities reported by Nosler for 165 grains (10.7 g) and heavier bullets use loads employing a slow-burning, double-base powder (Alliant Reloder 22).[citation needed]

The newer 7.62×51mm NATO/.308 Winchester cartridge offers similar performance to standard military .30-06 loadings in a smaller cartridge.

Recoil

One reason that the .30-06 has remained a popular round for so long is that the cartridge is at the upper limit of power that is tolerable to most shooters.[35][36] Recoil energy (free recoil) greater than 20 foot-pounds force (27 J) will cause most shooters to develop a serious flinch, and the recoil energy of an 8-pound (3.6 kg) rifle firing a 165-grain (10.7 g) 30-06 bullet at 2,900 feet per second (880 m/s) is 20.1 foot-pounds force (27.3 J). Recoil-shy shooters can opt for lighter bullets, such as a 150-grain (9.7 g) bullet. In the same 8-pound (3.6 kg) rifle, a 150-grain (9.7 g) bullet at 2,910 feet per second (890 m/s) will only generate 17.6 foot-pounds force (23.9 J) of recoil energy.[37] Young shooters can start out with even lighter bullets weighing 110, 125 or 130 grains (7.1, 8.1 or 8.4 g).[citation needed]

Cartridge dimensions

.30-06 Springfield cartridge dimensions. All sizes in inches

The .30-06 Springfield cartridge case can hold 68.2 grains and has a volume of 4.42 millilitres (0.270 in3). The exterior shape of the case was designed to promote reliable case feeding and extraction in

bolt-action rifles and machine guns alike, under extreme conditions.[citation needed
]

.30-06 Springfield maximum C.I.P. cartridge dimensions. All sizes in millimeters.[38]

Americans define the shoulder angle at alpha/2 = 17.5 degrees. According to the

twist rate for this cartridge is 254 mm (1 in 10 in), 4 grooves, Ø lands = 7.62 mm (.30 in), Ø grooves = 7.82 mm (.308 in), land width = 4.49 mm (.1768 in) and the primer type is large rifle.[citation needed
]

According to the official C.I.P. guidelines, the .30-06 Springfield case can handle up to 405 MPa (58,740 psi) piezo pressure. In C.I.P.-regulated countries, every rifle cartridge combination has to be

proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers. The 8×64mm S is the closest European ballistic twin of the .30-06 Springfield.[citation needed
]

Sporting use

Although the .30-06 was designed as a military round, it soon caught the attention of big game hunters in the United States. This new cartridge offered a flatter trajectory and carried more energy than the popular .30-30 Winchester. The .30-06 also could be loaded with the then new spitzer designed projectiles, which also contributed to extending the cartridge's performance with respect to other .30 caliber bullets fired from lever action rifles, making it easier to put venison on the table.

It is a very versatile round that may be loaded with bullets ranging from 110 to 220 grains, which may be effectively stabilized from 1:10" twist barrels. Thus, the cartridge may be used to hunt animals of different sizes from varmint to moose and even brown bears with adequately constructed heavy bullets.[39] Since the cartridge may be used for taking all North American big game species it was considered an all-round by hunters and gun writers as Jack O'Connor, who hunted extensively with it.[40] [41]

President Theodore Roosevelt took a .30-06 to his famous African Safari along with his son Kermit and Frederick Coerteney Selous, proving that the .30-06 could bring down game of any size. Though not optimal for dangerous game, the .30-06 is adequate for hunting African plains game.[42]

With 150-grain bullets, the .30-06 Springfield is a perfect option for medium-sized game such as deer and sheep. Leaving the muzzle at 2950 fps, it gives the hunter a maximum point blank range slightly short of 300 yards. The 165 and 168-grain bullets with higher ballistic coefficient contribute to buck cross winds more efficiently and maintain downrange energy at expense of a more curved trajectory, while loaded with 180 to 220 grains, the .30-06 is adequate for hunting larger game such as elk, moose, and even brown bears.

The .30-06 is also the parent case for many other popular hunting cartridges such as the venerable .270 Winchester, the .25-06 Remington, the .280 Remington, the .280 Ackley Improved. All of them are balanced, flat-shooting cartridges ranking high among the most popular big game hunting cartridge for mid-sized species worldwide.

Despite the new trend towards high ballistic coefficient cartridges, designed to be used with short length actions, hunters still praise the .30-06 as it still lists high on the rank of big game hunting cartridges popularity, and every major gun maker worldwide chambers it in at least one of its rifles.[43]

Military cartridge types

Note: .30-06 cartridges are produced commercially with many different bullets and to a number of different specifications.

United States

The .30-06 round was replaced by the 7.62×51mm NATO round in 1954. However, it remained in limited use in the army reserves and national guard for some time; Frankford Arsenal only stopped production in 1961, and Lake City Army Ammunition Plant was making .30-06 until the late 1970s, with new production batches in 1993 and 2002. The "T" (Trials) designation is the code number it had when it was under development and testing. The "M" (Model) designation is the number it received when it was made standard-issue. Issued bullets before 1934 used the year of adoption as their model number.

.30-03
cartridge.
This dummy cartridge uses a modified case bearing the headstamp F A 4 09 indicating manufacture at Frankford Arsenal in April 1909. The case has been tin-plated, fluted with six longitudinal indentations, and perforated three times in alternating indentations. The hollow brass bullet retains a spring-loaded steel rod exposed in the primer pocket with 1/8-inch of possible forward movement when struck by the firing pin. This rod is intended for the Hollifield Target Practice Rod device -- a pointed rod within the barrel that would be propelled out of the barrel when struck by the steel rod in the dummy cartridge to prick a paper target held just in front of the rifle.[46]

Commonwealth

The .30-06 (or "caliber .30") cartridge was adopted in 1940 during the beginnings of the Lend-Lease program in anticipation of using American weapons in front-line service. The British used American-made ammunition during the war, which was designated as cartridge S.A, .30 to avoid confusing it with their own .303 British service round. It was used after the war as belted machinegun ammunition by the Royal Armored Corps and was not declared obsolete until October, 1993. The "z" after the numeral indicates that it used a nitrocellulose propellant rather than cordite. Marks of ammunition were originally designated with Roman numerals (i.e., .303 Ball Mark VII), but were replaced with Arabic numerals by 1945 (i.e., .303 Ball MK 7).

  • Cartridge S.A, .30 ball MK Iz: This was the War Ministry's designation for the 172-grain .30-06 Ball M1 round. It was not accepted for use in service, as the American military had already marked it as limited standard.
  • Cartridge S.A, .30 ball MK IIz: This was the War Ministry's designation for the 150-grain .30-06 Ball M2 round. Lend-Lease ammo made for the British government had no mark designation and was headstamped .300z.
  • Cartridge S.A, .30 ball MK 3z: This was the designation for an experimental round designed in 1945 for Royal Navy use that was based on the .30-06 ball M2. It was not adopted for service.
  • Cartridge S.A, .30 ball MK 4z: This is a boat-tailed cartridge with a 150-grain full metal jacketed bullet. It is marked with a purple annulus. It was normally packed in 20-round cartons. However, Commonwealth countries that used the M1 Garand (like Pakistan) bundled it in 16-round cartons that contained two preloaded 8-round Mannlicher-style en-bloc clips.
  • Cartridge S.A, .30 ball MK 5z: This was made under contract by
    Fabrique Nationale
    in the 1970s.
  • Cartridge S.A, tracer .30 inch G Mark 1z: This is a boat-tailed cartridge with a 150-grain full metal jacketed bullet and a Berdan primer. It is marked with a red annulus and has a headstamp of .30 G1z.
  • Cartridge S.A, tracer .30 inch G Mark 2z: This was made under contract by Fabrique Nationale in the 1970s and is paired with .30 ball MK 5z. It is the same as the G Mark 1z, except it has a non-corrosive Berdan primer. It is marked with a red bullet tip and has a headstamp of .30 G2z.
  • Cartridge S.A., incendiary .30 inch B Mark Iz: US-made incendiary M1 cartridges.
  • Cartridge S.A., incendiary .30 inch B Mark IIz: UK-made incendiary M1 cartridges.
  • Cartridge S.A., drill .30 inch Mark I: This was the War Ministry's designation for the US dummy M40 round. It had green paint on its flutes.
  • Cartridge S.A., drill .30 inch Mark II: US dummy M40 round made by the UK from used US .30-06 cases. It had a recapped headstamp, ball or AP bullet over a wooden dowel, and red paint on its flutes.
  • Cartridge S.A., drill .30 inch Mark III: Training cartridge made by the Indian Army. Although described and specified in a 1945 ammunition manual, no copies have been discovered.
  • Cartridge S.A., drill .30 inch Mark IV:
  • Cartridge S.A., drill .30 inch Mark 5:

French Union

The .30-06 round was adopted in 1949 for use in American war surplus military aid weapons like the M1 Garand and M1919 medium machinegun. Military production was from the 1950s to the mid-1960s, while export production to French Union nations lasted until the late 1980s. Cartridge cases were softer than US specifications to prohibit their being recovered and reloaded by insurgents.

  • 7.62mm Modele 1949 Cartouche à Balle Ordinaire: This cartridge was based on the USGI .30-06 ball M2 (alternate) round. It had a cupro-nickel- or gilding-metal-clad steel jacket with either a brass or lacquered
    Parkerized
    steel case with a Berdan primer.
  • 7.62mm Modele 1951 Cartouche à blanc pour Fusil: This blank cartridge has a papier-mâché bullet for training use in rifles. The bullet is painted green to tell it apart from regular ammo.
  • 7.62mm Modele 1951 Cartouche à blanc pour Fusil-Mitrailleur: This blank cartridge has a wooden bullet for training use in machineguns. The bullet is painted or tinted blue to tell it apart from regular ammo.
  • 7.62mm Modele 1952 Cartouche à blanc: This blank cartridge has a lacquered Parkerized steel case and is sealed by a blue cardboard disc at the case mouth.

Military firearms using the .30-06 cartridge

View from the turret of an M67 "Zippo". On the right is a mounted M1919 Browning machine gun with an attached box of linked .30-06 ammunition.

Rifles

  • M1903/M1903A3 bolt-action rifle using Mauser-licensed 5-round stripper clips
  • M1917 Enfield rifle: loading from 5-round Mauser-style stripper clips
  • Itajuba Model 954 Mosquetao
  • M1 Garand: loads by inserting an 8-round Mannlicher-type en bloc clip. The clip is ejected upon either firing the last round or pressing a release button on the magazine.
  • M1941 Johnson rifle: feeding from a 10-round internal rotary magazine, loading from 5-round stripper clips
  • M1947 Johnson auto carbine
  • Model 45A: prototype bullpup using 20-round M1918 BAR magazines
  • Sheppard autorifle: prototype
  • Sieg automatic rifle: prototype
  • Springfield 1903 primer-actuated rifle
  • Thompson autorifle: prototype
  • FN Model 1949

Machine guns

See also

References

Notes
  1. ^ SAAMI Reference, p95,https://saami.org/wp-content/uploads/2019/02/ANSI-SAAMI-Z299.4-CFR-Approved-2015-12-14-Posting-Copy.pdf
  2. ^ "SAAMI pressure specs". 2007-09-28. Archived from the original on 2007-09-28. Retrieved 2023-02-11.
  3. ^ "Federal Cartridge Co. ballistics page". Archived from the original on 22 September 2007. Retrieved 2007-09-21.
  4. ^ "Accurate Powder reload data table" (PDF). Archived from the original (PDF) on 20 March 2009. Retrieved 2009-02-09.
  5. ^ Gun Digest Shooter's Guide to Rifles Wayne van Zwoll, p 186
  6. ^ Sharpe, Philip B. (1938). The Rifle in America. William Morrow. p. 591. The rimless cartridge case first used a standard 220-grain Krag bullet, but in 1906 the government decided that high velocity was necessary and accordingly adopted the German form of pointed or spitzer bullet, reducing the weight to 150 grains closely approximating the 154-grain 8 mm Mauser.
  7. ^ "Cartridge Specifications and Chronology". Retrieved 26 October 2014.
  8. ^ "The .30-06 Springfield Cartridge". The M1 Garand Rifle. Retrieved 26 October 2014.
  9. LCCN 62-12654
    . The maximum range was given in the handbooks as 4700 yards.
  10. ^ Hatcher 1962, p. 20
  11. ^ George, John (1981). Shots Fired in Anger. NRA Press. pp. 402–403.
  12. ^ Hatcher 1962, pp. 21–23
  13. ^ Hatcher 1962, pp. 19–20
  14. ^ "FN Mauser Model 98 rifle and carbine operator's manual" (PDF).
  15. ^ "M118 History - Sniper Central". Retrieved 26 October 2014.
  16. ^ Firestone, Adam C. "Firearm Technical Trivia, July 1999". www.cruffler.com.
  17. ^ a b Hatcher 1962, p. 29
  18. ^ a b c FM 23-10 Basic Field Manual: U.S. Rifle Caliber .30, M1903, 20 September 1943 page 212 Archived April 18, 2013, at the Wayback Machine
  19. ^ a b "Technical Manual Small-Arms Ammunition, TM9-1990, U.S. War Department". 23 May 1942. Retrieved 20 February 2020.
  20. ^ Rutledge, Steven T. (2001-07-27). "The CMP Mann Accuracy Devices". odcmp.org. Retrieved 2023-02-11.
  21. ^ Paul Wahl and Don Toppel, The Gatling Gun, Arco Publishing, 1971, p. 155.
  22. ^
    ISBN 978-1-884849-09-1
  23. ^ U.S. Army (April 1994), Army Ammunition Data Sheets: Small Caliber Ammunition (PDF), Technical Manual, TM 43-0001-27, archived from the original (PDF) on December 2, 2007, page 5-9
  24. ^ George 1981, p. 409
  25. ^ George 1981, pp. 81, 428, 434–435
  26. ^ Cooke, Gary W. ".30 Caliber (.30-06 Springfield) Ammunition". inetres.com.
  27. ^ Armor Plate Shootout - 0.5" thick MIL-A-12560 armor plate. 31 January 2013 – via YouTube.
  28. ^ Nelson, Terry (August 2018). "The .30-06 Can Do It All". Outdoor Hub.
  29. ^ "Federal Premium Ammunition - Rifle". www.federalpremium.com. Retrieved 2017-12-18.
  30. ^ Hodgdon Powder Company, Cartridge Load Recipe Report, 3/27/2010, data.hodgdon.com
  31. ^ Speer Reloading Manual Number 12, 1994, Blount, Inc., Lewiston, ID. pp. 286-294.
  32. ^ Hornady Handbook of Cartridge Reloading, Fourth Edition, 1991, Hornady Manufacturing Company, Grand Island, NE. pp. 343-350.
  33. ^ Nosler Reloading Guide Number Four, 1996, Nosler, Inc., Bend OR. pp. 322-329.
  34. ^ Barnes Reloading Manual Number 2-Rifle Data, 1997, Barnes Bullets, Inc., American Fork, UT. pp. 381-386.
  35. ^ Barnes, Frank C., Cartridges of the World (Kindle Edition), 2009, Frank C. Barnes and Krause Publications, Chapter 2, Location 375
  36. ^ Kim Lockhart. "30-06 Springfield". Archived from the original on 2013-04-24. Retrieved 26 October 2014.
  37. ^ "Rifle Recoil Table". Retrieved 26 October 2014.
  38. ^ "C.I.P. TDCC datasheet .30-06 Spring" (PDF).
  39. ^ Petzal, David (June 21, 2021). "Why You Can't Go Wrong with the .30/06".
  40. ^ Von Benedikt, Aram (January 11, 2021). ".30-06 Springfield: Is it Still the Best All-Around Big-Game Hunting Cartridge?".
  41. ^ Boddington, Craig. "THE .270 VS. THE .30-06".
  42. ^ Boddington, Craig (13 August 2021). ".30-06 Springfield -- Still America's Best?".
  43. ^ Boddington, Craig. "DON'T OVERLOOK THE .30-06".
  44. ^ "Ballistic Resistance of Body Armor NIJ Standard-0101.06" (PDF). NIJ Standards. United States Department of Justice. July 2008. Retrieved 2008-11-13.
  45. ^ "Instructional Guidance on the Operation and Maintenance of M1 Garand Rifle Firing the M1909 Blank Cartridge" (PDF). Archived from the original (PDF) on 2012-11-07. Retrieved 2019-02-08..
  46. ^ Punnett, Chris. "An Introduction to Collecting .30-06 Cartridges". International Ammunition Association, Inc. Retrieved 3 March 2018.
  47. ^ "US T24 machine gun (MG42)". www.forgottenweapons.com. 2010-12-11. Retrieved 2023-02-11.
  48. ^ "An Introduction To Collecting .30-06 Cartridges - International Ammunition Association". cartridgecollectors.org. Retrieved 2023-02-11.
  49. ^ "Gary's U.S. Infantry Weapons Reference Guide - .30 Caliber (.30-06 Springfield) Ammunition". Archived from the original on 27 September 2007. Retrieved 2007-09-21.
  50. ^ "An Introduction to Collecting .30-06". Archived from the original on 19 September 2007. Retrieved 2007-09-21.
Bibliography

External links

Media related to .30-06 at Wikimedia Commons

Retrieved from "https://en.wikipedia.org/w/index.php?title=.30-06_Springfield&oldid=1219606503"