AMX-30

Source: Wikipedia, the free encyclopedia.

AMX-30
105 mm Modèle F1 tank gun
Secondary
armament
1× 20 mm F2 autocannon
1× 7.62 mm NF1 machine gun
EngineHispano-Suiza HS-110 multi-fuel
680 hp (510 kW)-720 hp (540 kW)
Power/weight18.9 hp/tonne
TransmissionManual on AMX30B
Semi-automatic SESM ENC200 on AMX-30B2
SuspensionTorsion bar with shock absorbers
Operational
range
600 km (370 mi)
Maximum speed 65 km/h (40 mph)

The AMX-30 is a

transmission
adversely affected the tank's performance.

In 1979, due to issues caused by the transmission, the French Army began to modernize its fleet of tanks to AMX-30B2 standards, which included a new transmission, an improved engine and the introduction of a new OFL 105 F1 fin-stabilized

tactical nuclear missile launcher and a surface-to-air missile
launcher.

It was preceded by two post-war French medium tank designs. The first, the

AMX 50, was cancelled in the mid-1950s in favour of adopting the M47 Patton tank. In 1956, the French government entered a cooperative development program with West Germany and Italy in an effort to design a standardized tank. Although the three nations agreed to a series of specific characteristics that the new tank should have, and both France and Germany began work on distinctive prototypes with the intent of testing them and combining the best of both, the program failed as Germany decided not to adopt the new French 105-millimetre (4.1 in) tank gun and France declared that it would postpone production until 1965. As a result, both nations decided to adopt tanks based on their own prototypes. The German tank became the Leopard 1
, while the French prototype became the AMX-30.

As early as 1969, the AMX-30 and variants were ordered by Greece, soon followed by Spain (AMX-30E). In the coming years, the AMX-30 would be exported to Saudi Arabia, Venezuela, Qatar, the United Arab Emirates, Cyprus and Chile. By the end of production, 3,571 units of AMX-30s and its variants had been manufactured. Both Spain and Venezuela later began extensive modernization programs to extend the life of their vehicles and to bring their tanks up to more modern standards. In the 1991 Gulf War, AMX-30s were deployed by both the French and Qatari armies. Qatari AMX-30s saw action against Iraqi forces at the Battle of Khafji. France and most other nations replaced their AMX-30s with more up-to-date equipment by the end of the 20th century.

Background

Although the

occupation of France during World War II temporarily interrupted French development of armoured fighting vehicles, clandestine research allowed the French to quickly recover lost ground after its liberation in mid-1944.[2] During the occupation, the French had secretly worked on an armour program that was, in 1944, taken over by the state workshop Atelier de Construction de Rueil (ARL), resulting in the design and production of the ARL 44, which began production in 1946.[3] The tank was powered by a Maybach HL-230 575 horsepower (429 kW) engine, and armed with a 90-millimetre (3.5 in) tank gun.[4] Although the 48-metric-ton (53-short-ton) vehicle was comparable to contemporary battle tanks in firepower and engine power, it suffered from distinct disadvantages, including an antiquated track design.[2] While 600 were planned, only 60 were ultimately produced by 1950. That year, these were issued to the French Army's 503rd Tank Regiment.[5] Given that the ARL 44 had been considered only a stop-gap vehicle for the French Army's armoured forces since inception, work on a new tank had begun as early as March 1945.[2]

AMX 50 at the tank museum in Saumur

Development of the new tank was offered to five separate manufacturers: Atelier de Construction d'Issy-les-Moulineaux (AMX), Forges et Chantiers de la Méditerranée (FCM), Renault, Societe Lorraine de Dietrich (SLD-Lorraine) and Societé d'Outillage Mécanique et d'Usinage d'Artillerie (SOMUA).[5] The new vehicle was based on the new post-war requirement for a single battle tank.[2] The new vehicle was designated the AMX 50. Its hull and suspension were similar to that of the German Panther tank, which had been used by the French Army in the immediate post-war.[6] The French government's specifications for the new tank were strongly influenced by both the Panther tank and the heavier Tiger I; specifically, the French Army was looking for a tank with the protection of the former and the firepower of the latter.[7] Although the design borrowed from German tanks, including the Maybach 1,000 horsepower (750 kW) engine, based on an earlier model, and the torsion bar sprung road wheels, the AMX 50 also included a number of unique features.[8] For example, it included an oscillating turret, mounted on trunnions, which was the first of its kind. The oscillating turret consisted of two parts, one of which was mounted on the trunnions of the lower part, attached to the turret ring. The main gun was attached to the upper part, facilitating gun elevation and depression, as well as simplifying the fire control equipment and the installation of the automatic loading system.[9] Of the three contractors, Renault withdrew from the program, while in early 1946 the French government selected AMX and SOMUA to continue the development.[5] The prototypes were designated M4s, and AMX completed its prototype in 1949, while SOMUA would not be finished until 1956.[10] AMX's first prototype was armed with a 90-millimeter (3.5 in) cannon, although a second prototype was fitted with a larger 100-millimetre (3.9 in) gun in July 1950[9] Although it was intended to put the AMX 50 into production as the standard medium tank of the Western European Union,[7] financial reasons and the arrival of military aid from the United States in the form of 856 M47 Patton tanks[11] caused the original program to be abandoned.[9][12] In 1951 it was decided to turn the program into a heavy tank project with an even larger 120-millimetre (4.7 in) tank gun; though three prototypes were built, this too was abandoned in 1956, mainly due to a failure to design a powerful enough engine.[7]

The 1955 Char Batignolles-Châtillon

With the demise of the 100-millimeter (3.9 in) AMX 50 program in 1951, France temporarily officially abandoned the thought of producing a medium tank.[13] It was expected that West Germany would soon be allowed to rearm, and the Germans had appeared to entertain the concept of equipping their forces with a host of low-cost light, but relatively powerfully armed tanks, their quantity compensating for a lack of full armament parity with the latest medium tanks.[13] The prospect of delivering many thousands of these to the Germans induced the French to adopt the idea and plan to create light tank "Type 67" armoured divisions, for which the AMX-13/105 was specially designed.[13] A private enterprise design aimed at fulfilling the same requirement was the somewhat larger Char Batignolles-Châtillon. A derived medium tank prototype of the latter, made in 1955, proved that it was possible to produce a tank with a first-rate gun and frontally protected with 80-millimeter (3.1 in) steel equivalence within a weight constraint of 30 metric tons (33 short tons). This revived interest in the medium tank concept.[13]

In 1956, the WEU defence workgroup FINBEL (named after France,

Colomb-Béchar a bilateral agreement was concluded between France and Germany to collaborate in building a tank.[15] Though the other FINABEL nations did not formally participate,[15] the type was called Europa-Panzer to indicate its common European nature, and experts from all countries were involved in the design process.[16] The specifications (FINABEL 3A5)[17] for the new tank called for a lightweight and mobile battle tank, setting the weight limit to 30 metric tons (33 short tons) and compromising the ability to heavily armour the vehicle.[18][19] French and German engineers, during a conference in Bonn on 12 February 1957, defined the requirements for the future tank. This included a maximum width of 3.15 metres (10.3 ft), a height of 2.15 metres (7.1 ft) and a 105-millimetre (4.1 in) tank gun, to be developed by the Franco-German military research institute at Saint Louis.[20] The new tank would have an air-cooled, petrol engine, a torsion bar suspension with hydraulic shocks, a power-to-weight ratio of at least 30 horsepower (22 kW)/metric ton and a road range of at least 350 kilometres (220 mi). In May, Italy joined the project, though only nominally, without any material contribution, because after the war it had no tank design bureaus.[15] That same year, on 28 November,[15] the French and German ministries of defence in Paris agreed upon a contract which would allow both countries to produce two prototypes separately.[21] The next year, however, the project suffered a first setback when Charles de Gaulle took power in France, creating the Fifth Republic: the Paris treaty had as its main point developing a common nuclear weapon and on 17 June 1958 de Gaulle decided to refuse Germany and Italy the atomic bomb, to avoid antagonizing the US and United Kingdom. This made Germany lose much interest in a common tank project also.[15]

The French prototypes were developed and produced by the Atelier de Construction d'Issy-les-Moulineaux, under the direction of General Joseph Molinié of the Direction des Études et Fabrications d'Armements (DEFA, the later Direction Technique des Armements Terrestres)

T-54, and Sofam petrol engines. Another seven, with an improved sleeker turret cast, were manufactured between 1961 and 1963.[15][24] Work on the German prototypes was carried out by two teams, including Team A composed of Porsche, Maschinenbau Kiel, Luther & Jordan and Jung-Jungenthal .[25] Team B was made up by Ruhrstahl, Rheinstahl-HANOMAG and Henschel.[26] Wood mock-ups were completed in 1959, while the first two prototypes were finished by 1961 (completed by Team A).[27]

Development history

De Gaulle decided that France, though formally remaining a member, would no longer participate in the

Bundesrat decided to procure a purely national tank.[28] In response, the same month the French government decided likewise.[17]

Comparative trials were nevertheless held at

Meppen, Bourges and Satory[17] between five French and five German prototypes between August and October 1963, under Italian, Dutch, Belgian and American supervision.[28][29] The French type had received a separate national designation: AMX 30.[28] The trials indicated that the German type, on 1 October also getting its own name Leopard, had a better mobility and acceleration.[28] The French government decided that it could not procure a new tank until 1965,[30] while the Germans refused to adopt the Franco-German 105-millimeter (4.1 in) tank gun, in lieu of the British Royal Ordnance L7, of which they had already ordered 1,500 in the autumn of 1962,[27][31] their plan having failed for Rheinmetall to produce in Germany a common type of munition of sufficient quality.[23] Suggestions to save the project by combining the French turret with the German chassis failed.[23] As a result, the program was cancelled and the French and Germans definitely decided to adopt their two separate tanks.[32]

One of the two 1965 pre-production vehicles

The prototypes of the AMX-30 weighed 32.5 metric tons (35.8 short tons), and were compact, with a width of 3.1 metres (10 ft), comparable only to the

T-55. In contrast to the AMX-50, the AMX-30 was issued a conventional turret, because it was found that it was more difficult to seal oscillating turrets from radioactive dust and against water when the tank was submerged.[24] Oscillating turrets also had a large ballistic weakness in the area of the skirt and turret ring.[33] Originally, the first two prototypes were powered by a 720 horsepower (540 kW) spark ignition engine, named the SOFAM 12 GSds. Later, a multi-fuel diesel engine was adopted, developed by Hispano-Suiza. The seven 1963 prototypes of the AMX-30 were later rebuilt with the new diesel engine.[34] Two further prototypes, meant to be direct preproduction vehicles, were delivered in November 1965. Besides the diesel engines, they had changed hull and turret casts and different gun mantlets; the latter would again be changed in the production vehicles.[35]

The first production versions of the AMX-30, named AMX 30B to distinguish them from the AMX 30A prototypes,[36] were completed in June 1966, manufactured with a welded and cast hull and a fully cast turret.[12] The production version of the tank had a combat weight of 36 metric tons (40 short tons).[37] The AMX-30's survivability was based on its mobility; French engineers believed that the tank's mobility would have been compromised had they added enough steel plating to protect against modern anti-tank threats, including high-explosive anti-tank (HEAT) warheads. As a result, the type had the thinnest armour of any main battle tank produced at the time.[38] The turret has a maximum armour thickness of 50 millimetres (2.0 in), the armour sloped at 70 degrees on the front plate and 23 degrees on the side, offering protection against 20-millimetre (0.79 in) armour piercing projectiles.[39] The Line-of-Sight armour values are: 79-millimeter (3.1 in) for the front of the hull; 59-millimetre (2.3 in) for the forward sides of the hull; 30-millimetre (1.2 in) for the rear sides and rear of the hull; 15-millimetre (0.59 in) for the hull top and bottom; 80.8-millimeter (3.18 in) for the turret front; 41.5-millimeter (1.63 in) for the turret sides; 50-millimetre (2.0 in) for the turret rear and 20-millimetre (0.79 in) for the turret top.[40] Further protection is offered by a nuclear, biological and chemical protection suit, including a ventilation system.[41]

AMX-30 FORAD (Force Adverse), representing a T-72, on maneuver

One of the unique features of the AMX-30 was the Obus à Charge Creuse de 105 mm Modèle F1 (Obus G) HEAT projectile and its main gun,

M2 Browning machine gun. The tank commander also made use of a 7.62-millimeter (0.300 in) anti-aircraft machine gun on the turret roof.[47] The vehicle carried 50 105-millimeter (4.1 in) projectiles,[47] 748 12.7-millimeter (0.50 in) rounds and 2,050 7.62-millimeter (0.300 in) bullets.[48] The tank commander was issued a cupola which offered ten all-around direct-vision episcopes, and a binocular telescope with 10x magnification. The commander was also given an optical full-field coincidence range finder. The gunner was given a telescoping gun sight and two observation periscopes.[37]

Bovington Tank Museum

The production version of the AMX-30 was fitted with Hispano-Suiza's HS-110 diesel engine, located in the rear of the hull. The 28.8 liters (1,760 cu in) engine could be replaced on the field in 45 minutes, and produced 720 horsepower (540 kW), offering the tank a maximum velocity of 65 kilometers per hour (40 mph) on roads. The fuel efficient engine, in conjunction with a total fuel capacity of 970 liters (260 U.S. gal), gave the AMX-30 a maximum road range of up to 600 kilometers (370 mi).[49] The engine's drive is taken through a Gravina G.H.B.200C twin-plate centrifugal clutch.[50] The gearbox was an AMX 5-SD-200D, with five forward gears and five reverse gears. This transmission was heavily influenced by that of the German Panther tank and was based on a project which had begun in 1938. The transmission was one of the AMX-30's major faults and caused a variety of mechanical problems, including that the driver would have to manually change gears at specific times, even if the tank was moving over rough terrain.[51] The tank's weight is distributed over five double, aluminum-alloy, rubber-tyred road wheels on either side, propelled on 570-millimeter (22 in) wide tracks.[52] The tank could ford 1.3-meter (1.4 yd) deep water obstacles without preparation, up to 2 meters (2.2 yd) with minor preparation, and up to 4 meters (4.4 yd) with full preparation.[38] Full preparation for water operations consisted of the addition of a snorkel tube, the installation of blanking plates, carried on the front of the hull, over the engine compartment's air intake louvers,[53] and the installation of infrared driving equipment, including a searchlight.[12] In 1969, a special diving and evacuation training vehicle, without engine or tracks, was created and nicknamed the AMX 30 Gloutte (from the French faire glouglou, "gurgle"); it could be quickly be lowered by winch into a reservoir and was equipped with an escape tube.[54]

Modernization

French AMX-30B2 deployed in Saudi Arabia, during military operations before the Gulf War

During the production run, many improvements were implemented. These did not include gun stabilization from 1971, and from 1972[55] replacing the original coaxial heavy machine gun with a dual purpose 20-millimeter (0.79 in) autocannon against light armour and helicopters, with the ability to depress to −8 degrees and elevate to 40 degrees.[45] All French army vehicles were eventually brought to this newer standard; the designation remained AMX 30B.[56]

An AMX-30B2 BRENUS. Note the ERA blocks mounted on the turret.

Beginning as early as 1973, only seven years after the beginning of production, the French began a research program for a future modification of the tank.[57] The project was to result in a AMX 30 Valorisé ("upgraded AMX-30").[58] In June 1979, the French Army decided to both build new and modernize existing AMX-30s with an improved fire control system and a new transmission, and designated them AMX-30B2s.[59] The first new production vehicles were taken into service in January 1982.[60] Improvements to the COTAC APX M-508 fire control system included the installation of a laser rangefinder and a low-light TV (LLTV).[61] The main gun's lethality was improved with the introduction of a new armour piercing fin stabilized discarding sabot (APFSDS). The original engine was exchanged for an improved variant, known as the HS-110.2, producing 680 horsepower (510 kW). The poor transmission was replaced with the semi-automatic SESM ENC200 Archived 2016-02-01 at the Wayback Machine transmission (now RENK France), with a torque converter. The suspension was improved by adopting new torsion bars and shocks, which increased the vertical deflection range of the road wheels,[62] thereby improving the tank's off-road mobility.[63] From 1998, the French army started to replace the engines of its remaining AMX-30 tanks and variants with 500 Renault Mack E9 750 hp engines.[64]

Leclerc tank had already been ordered in the 1990s, however the AMX-30 continued to play a key role in the French army and two further up-grades were implemented in limited numbers for French rapid reaction force which was made up of 2 Tank Regiments 1er and 2e Chasseurs. The first upgrade was an Explosive Reactive Armour package called BRENUS. Final upgrade was the purchase of 500 Renault RVI Mack E9 turbocharged diesel engines generating 750 hp

radar absorbent material.[64]

In the late 1980s, a consortium of West German companies developed the Super AMX-30 modernization package for AMX-30B. The consortium itself consisted of AEG, Krupp Atlas Elektronik, MTU, Wegmann & Co., Diehl, ZF Friedrichshafen, and GLS. The upgrades to the power packs were new MTU MB833 Ka501 diesel engine with 850 hp, ZF LSG-3000 automatic transmission, new engine cooling system, and increased fuel capacity up to 1,028 liters. The upgrades on mobility also includes upgraded torsion bars, hydraulic shock absorbers, new slightly larger road wheels, and Diehl Type 234 tracks. The fire control systems were upgraded with MOLF-30 modular laser FCS by Krupp Atlas Elektronik, gyro-stabilized gun and gunner's day/night sight, laser rangefinder, and fully electric turret drive. Optional additional armour on the turret also available per buyer request. A single prototype was made and were publicly unveiled and tested in Saudi Arabia. The upgrade failed to find a buyer.[71]

Comparison to contemporary tanks

M60A1[72]
Leopard 1A1[73] AMX-30B[74]
T-55[75]
T-62[76] T-64A[77]
Chieftain
Mk.2
Weight 47.62 metric tons (52.49 short tons)[78] 41.5 metric tons (45.7 short tons) 36 metric tons (40 short tons) 36 metric tons (40 short tons) 40 metric tons (44 short tons) 38 metric tons (42 short tons) 54 metric tons (60 short tons)
Gun 105 mm (4.1 in) M68 rifled 105 mm (4.1 in) L7A3 rifled 105 mm (4.1 in) L/56 F1 rifled 100 mm (3.9 in) D-10T2S rifled 115 mm (4.5 in) U-5T smoothbore 125 mm (4.9 in) D-68 smoothbore 120 mm (4.7 in)
L11
rifled
Ammunition 63 rounds[78] 55 rounds 50 rounds 43 rounds 40 rounds 36 rounds 62 rounds
Road range (integral fuel) 480 km (300 mi) 600 km (370 mi) 600 km (370 mi) 500 km (310 mi) 450 km (280 mi) 500 km (310 mi) 500 km (310 mi)
Engine output 750 hp (560 kW) 830 hp (620 kW) 720 hp (540 kW) 580 hp (430 kW) 580 hp (430 kW) 700[79] hp (520 kW) 750 hp (560 kW)
Maximum speed (on road) 48 km/h (30 mph) 65 km/h (40 mph) 65 km/h (40 mph) 50 km/h (31 mph) 50 km/h (31 mph) 60 km/h (37 mph) 40 km/h (25 mph)
Armor (front turret plate) 250 mm (9.8 in) LOS[80] 60 mm (2.4 in) rounded[81] 80.8 mm (3.18 in)[40] 203 mm (8.0 in)[82] 242 mm (9.5 in)[83] 450 mm (18 in) 390 mm (15 in)
Armor (glacis plate) 109 mm (4.3 in) at 65° [84] 70 mm (2.8 in) at 60°[81] 80 mm (3.1 in) at 68°[40] 97 mm (3.8 in) at 58°[82] 102 mm (4.0 in) at 60°[83] 430 mm (17 in) LOS 388 mm (15.3 in) LOS

Variants

The AMX 30 ACRA prototype

The AMX-30 has a number of different variations, including a number of other armoured vehicles based on the same chassis. A simplified version of the tank, without the infrared searchlight and periscopes and a less complex commander's cupola was developed for export, known as the "basic AMX-30". This version also came devoid of the pressurized air filtering system, and moved the smaller 7.62-millimeter (0.300 in) machine gun into the coaxial position and the larger 12.7-millimeter (0.50 in) M2 to the turret roof. Another version was considered for the French Army, adopting a 142-millimeter (5.6 in) tank gun able to fire the supersonic ACRA [fr] (Anti-Char Rapide Autopropulsé)[85] anti-tank guided missile, as well as high explosive rounds. A prototype was finished in 1967 with a new cast turret, wide enough to hold the much larger armament.[86] However, the high costs of the missiles forced the French Army to abandon the program in 1972.[87] The vehicles based on the chassis include an armoured recovery vehicle, a bridgelayer, a self-propelled anti-aircraft vehicle, a tactical nuclear missile launcher and a self-propelled artillery piece.[88]

Right side of an AMX-30D of the French Army

AMX-30D – Dépanneur-Niveleur

The armoured recovery vehicle, known as the AMX-30D (AMX-30 Dépanneur-Niveleur), was designed to recuperate or help maintain vehicles in the field. Work on the AMX-30D began in 1966, as the French Army researched developing a recovery vehicle to be issued to units receiving the AMX-30 tank. A prototype was produced and delivered for experimentation in 1971, and in February 1973 the first of a pre-series of five vehicles was delivered. That same year, another 100 AMX-30Ds were ordered, and these began production in 1975.[89] The recovery vehicle includes a winch powered by the vehicle's engine, with the ability to pull a maximum of 35 metric tons (39 short tons) of weight. The vehicle also has a 80-meter (87 yd) heavy towing cable, while an auxiliary winch has another 120-meter (130 yd) towing cable, able to tow up to 20 metric tons (22 short tons) when working over the front of the AMX-30D. In the latter case the vehicle must be supported by removable props, which are carried on the vehicle, and the bulldozer blade must be lowered on the ground. The crane can lift up the 3.29 metric tons (3.63 short tons) power pack and the 10 metric tons (11 short tons) turret. Instead of a turret, the AMX-30D is fitted with a superstructure, and weighs 36 metric tons (40 short tons), although with the extra power pack it can weigh up to 40 metric tons (44 short tons). The vehicle can protect itself with a 7.62-millimeter (0.300 in) machine gun.[90] The driver's visibility is aided by the inclusion of three M-223 episcopes. The AMX-30D has a maximum on-road velocity of 60 kilometers per hour (37 mph) and a maximum road range of 500 kilometers (310 mi).[91]

AMX-30H – Poseur de pont

The AMX-30H bridgelayer, or Poseur de pont, consists of the AMX-30's chassis with a box-like superstructure, supporting a scissor-type folding bridge. The 22-meter-long (24 yd) bridge can span 20-meter (22 yd) gaps. The bridge has a width of 3.1 meters (3.4 yd), but can be increased to 3.95 meters (4.32 yd) through the use of appliqué panels. It can support weighs of up to 46 metric tons (51 short tons).[92] Bridgelayer development began as early as 1963, although it was not until June 1967 that development began on a prototype. Although a prototype designated AMX-30H was finished in 1968, it was not until 1971 that the vehicle was evaluated. At the end of the evaluations in September 1971, a pre-series of five vehicles was ordered, resulting in a new period of evaluations beginning on 16 October 1972. In 1975, the AMX-30H was declared standard in the French Army, although none of these vehicles were ever ordered.[93] 12 vehicles were purchased by the Saudi Arabian Army.[94][95]

Pluton tactical nuclear missile launcher

AMX-30 DCA – défense contre avion

The self-propelled anti-aircraft gun began development in 1969 to provide this type of vehicle to the French Army and for export. Although ultimately none were ordered for France, in 1975 Saudi Arabia ordered an improved version (53 units,) denominated the AMX-30SA (first known as the AMX-30 DCA, for "défense contre avion".)[96] Developed to defend against low-altitude attacks, the system included two Hispano-Suiza 30-millimeter (1.2 in) 831 A automatic guns, coupled to an Oeil-noir fire control system. This system had already been installed on the AMX-13, in lieu of a heavier chassis, using a turret designated the S 401 A. Although this particular vehicle began production in 1962, the appearance of the AMX-30 offered a larger chassis to which the S 401 A turret could be mounted on, providing superior mobility. The heavier AMX-30 also provided a more stable platform for the guns, and allowed the system to carry much more ammunition (1,200 rounds, as compared to the 600 carried by the AMX-13 version). The guns were designed to fire in 5-round or 15-round bursts, with a cyclic rate of fire of 650 rounds per minute. They were controlled by an analogue computer, receiving information from a Doppler radar, which could be folded into an armoured box when not in use to protect from damage. The fire control depended on visual tracking, and so could only work in daylight and clear weather.[97]

Roland
surface-to-air missile launcher

AMX-30R and Pluton

Three missile systems were developed to be mounted on the AMX-30 chassis.

Roland) surface-to-air missile launching system, which began development in 1974. Five vehicles of a pre-series were completed by 1977 and then evaluated, prompting the order of 183 vehicles that same year.[100]

A GCT in service of Saudi Arabia

The Roland includes a rectangular superstructure, taller than that of both the AMX-30D and the Pluton, which houses the radar system and mounts two launching tubes on either side, with an autoloading system feeding from an eight missile reserve inside the superstructure. The Roland's exploration radar has a detection range of 16 kilometers (9.9 mi). The third missile system, called the AMX-30SA SAM, was developed in 1975 for Saudi Arabia, to fire the SA-10 Shahine, developed and manufactured by Thomson-CSF; the launching vehicle was heavily based on the AMX-30R.[101]

AMX 30 AuF1 canon automoteur

The

AMX 30 AuF1. The 155-millimeter (6.1 in) howitzer was 40 calibers long, and was autoloaded allowing it a rate of fire of eight rounds per minute, with a maximum range of 30 kilometers (19 mi) with the LU211 round. The turret enables the gun to have an elevation of up to 66 degrees, and allows it to traverse a full 360 degrees.

AMX-32 at Saumur Général Estienne museum

The vehicle carries 42 rounds of ammunition, with combustible cartridge cases.[102] The origins of the decision to design a self-propelled howitzer can be traced back to 1969, with the first prototype completed in 1972. By 1979, seven prototypes had been produced, and six pre-series vehicles, followed by the production of 110 vehicles. This order was later increased to 190.[103]

AMX 32

The first prototype of an improved AMX-30 for the export market, known as the AMX-32, was unveiled in June 1979. Originally intended as an alternative for the AMX-30B2, and deliberately imitating the spaced armour concept the Germans had successfully implemented on the Leopard 1A3 and A4,[104] the AMX-32 fielded greater armour protection to offer increased survivability against anti-tank guided missiles. A 20-millimeter (0.79 in) autocannon was included as the main gun's coaxial weapon, and a 7.62-millimeter (0.300 in) machine gun attached to the roof. However, no orders were ever placed.[105]

Production

French AMX-30B FORAD in urban camouflage in 2016. The last 4 were withdrawn from service in 2017/2018

AMX-30 production occurred at the Atelier de Construction de Roanne in the town of Roanne. This heavy manufacturing factory was built during World War I to produce artillery shells, although by 1952 the factory had begun producing armoured fighting vehicles. Before producing the AMX-30, for example, it had made 1,900 AMX-13s and variants. The Roanne factory was responsible for final assembly, most components were made elsewhere: the powerplant by the Atelier de Construction de Limoges, the full armour set by the Ateliers et Forges de la Loire, the turret by the Atelier de Construction de Tarbes, the cannon by the Atelier de Construction de Bourges, the cupola and machine-gun by the Manufacture d'Armes de Saint-Étienne and the optics by the Atelier de Construction de Puteaux; all these again used many subcontractors.[45] In a series of corporate mergers under state guidance, most of these firms would eventually be concentrated into GIAT.[56]

Originally, 300 AMX-30s were ordered by the French Army, and by 1971 the order had been increased to 900, divided between eight batches,[87] including all variants based on the chassis.[35] Beginning in 1966, ten AMX-30s were assembled per month, and the first five were issued in August 1966 to the 501st Régiment de Chars de Combat. Monthly production grew to 15–20 tanks as new factories began to manufacture components of the vehicle and existing factories increased their production potential.[106] However, in April 1969, production was again reduced to ten per month.[107] By 1971, about 180 vehicles were in service; in 1975 delivery began of the last 143 units of the final eighth batch of the original order.[58] In 1985, the number of AMX-30s had risen to 1,173.[108] By the end of production, France had accepted 1,355 AMX-30s into service,[106] including 166 brand-new AMX-30B2s. Another 493 tanks were refitted and modernized to AMX-30B2 standards;[109] originally 271 new and 820 refitted vehicles had been planned.[110] The French Army also accepted a large number of variants, including 195 self-propelled howitzers, 44 AMX-30 Pluton tactical nuclear missile launchers, 183 AMX-30Rs, 134 AMX-30Ds and 48 engineer vehicles (AMX-30EBG).[111] The last 35 new battle tanks were in 1989 ordered by Cyprus and the last new variant vehicles, a batch of twenty GCTs, in 1994 by France.[112]

In the late 1990s, the French Army began to accept the new Leclerc main battle tank to replace the antiquated AMX-30.[113] The first units to be outfitted with the new tank were the 501st and 503rd tank regiments, followed by the 6th and 12th Cuirassier Regiments.[114]

Export

A Spanish AMX-30 on display at the El Goloso Museum of Armored Vehicles

Having in February 1964 decided to produce its own battle tank,

Chieftain tank, in 1966.[115]

France eventually also failed to obtain orders from the remaining two FINABEL nations, Belgium and the Netherlands: the Dutch did not even test the type and the Belgians ordered the Leopard when France refused to allow partial component production of the AMX-30 in Belgium, fearing it would increase the unit cost.[15]

Less costly and easier to maintain, the AMX-30 has been preferred over the Leopard 1 by less affluent or developed nations.[58][116]

In 1969, the

Greek military junta agreed to procure a total of 190 AMX-30s and 14 AMX-30Ds, making Greece the first foreign nation to purchase the French tank.[117] Throughout the 1960s, Spain had considered both the AMX-30 and the Leopard 1 to complement their existing fleet of M47 and M48 Patton tanks.[118] Ultimately, Spain opted for the AMX-30 for a variety of reasons, including British unwillingness to sell the L7 tank gun to a fascist regime[119] and the French offer to allow the AMX-30 to be manufactured in Spain.[120] Spain ordered 19 tanks in 1970, and later agreed to manufacture another 180 tanks in Spain. In 1979, Spain began the production of a second batch of 100 tanks, completing a total of 299 AMX-30s issued to the Spanish Army; these were designated AMX-30Es. Spain also procured 10 AMX-30Ds and 18 AMX-30Rs.[121] As production of the AMX-30E ended in 1979, the Spanish Army was already looking for a modernization program to improve the quality of the tank's mobility.[122] In 1987, the Spanish Army began a six-year modernization program which brought 150 tanks up to AMX-30EM2 standards and modified another 149 tanks to AMX-30EM1 standards.[123] The former was a much more complete upgrade, which saw improvements to the tank's mobility through the adoption of a new engine and gearbox, as well as to the tank's firepower, with the development of a new kinetic energy penetrator and the introduction of a far more complex and accurate fire control system for the tank's gunner, amongst other things.[124] The AMX-30EM1 was termed a "reconstruction" and only saw improvements to the tank's mobility by adopting a new transmission and renovating much of the vehicle's worn out systems, such as the brakes, indicators and controls.[125] These rebuilt AMX-30s were soon replaced by M60 Patton tanks procured from the United States in the early 1990s,[126] while its fleet of AMX-30EM2s was later replaced by the B1 Centauro anti-tank vehicle.[127]

A close-up view of an AMX-30's turret bustle rack
Prototype of AMX-30C2 sporting a 105mm rifled tank gun

In 1972, France was able to gain a contract with Saudi Arabia over the purchase of 190 of the AMX-30S variant, designed for the desert environment of the

M60A3 Patton tanks.[131] Although Saudi Arabia planned to procure more M1 tanks, it was unable to do so for financial reasons and the AMX-30 has still not been retired.[132]

Venezuela originally placed an order for 142 tanks in 1972, although this was later reduced to 82 and four AMX-30Ds.[117] In the mid-1980s, Venezuela adopted a modernization plan for its deprecated AMX-30s, opting to replace the original engine with a new Continental AVDS-1790-5A diesel engine, producing 908 horsepower (677 kW) and exchanging the existing transmission with an Allison CD-850-6A. Venezuelan AMX-30s received new fuel tanks, increasing the tank's road range to 720 kilometers (450 mi), while firepower was improved through the adoption of a modern Lansadot MkI fire control system and Ballistic computer from Elbit Systems.[133] In 1977, France and Qatar signed an agreement which garnered France another 24 AMX-30s sold, which would rise to 54 when Qatar ordered a further 30 AMX-30B2s in 1987.[128] The United Arab Emirates placed an order in 1977 for 64 tanks and a single armoured recovery vehicle, to complete an armoured brigade, in 1977. Due to political issues between Chile and Argentina, the former placed an order for 46 tanks, although this was later cut short to 21 when the contract was canceled by the French government in 1981. In 1982, Cyprus acquired a total of 16 AMX-30B2s and a single AMX-30D, and later ordered another 36 AMX-30B2s. Total production of the AMX-30 and variants totaled 3,571 units.[134]

Later many used vehicles were resold to other nations: in 2005 Cyprus had 102 AMX-30s (obtained from Greece) and 52 AMX-30B2s;

Bosnia 32 AMX-30s (from the UAE). French strength had dwindled to about 250 AMX-30B2s.[135]

Combat history

Two French AMX-30s in Al-Salman

Qatari AMX-30s saw combat during the Gulf War at the Battle of Khafji, where on 30 January 1991 they counter-attacked in an attempt to retake the city of Khafji from Iraqi forces which had occupied it the night before. During the action, Qatari AMX-30s knocked out three Iraqi T-55s and captured four more.[136] Two Qatari AMX-30 were lost during the battle.[137]

One of the six AMX 30 Demin units

The French participation in the Persian Gulf War, codenamed

A-10s, and capturing numerous prisoners. The final objective was the As-Salman air base ("Objective White"), that was reported captured by 18:15, after a multi-pronged attack, with the 4e Dragons attacking from the south.[143] In all, the AMX-30s fired 270 main gun rounds.[140]

In 2015, Saudi Arabia's AMX-30s and M1 Abrams tanks deployed along the

Operators

AMX-30 operators[image reference needed]
  Current
  Former

Current operators

  •  Bosnia and Herzegovina: 50 AMX-30Bs donated from UAE. Of those 36 AMX-30Bs in service, 14 AMX-30Bs in storage and for spare parts.
  •  Cyprus: 52 AMX-30B2 in service. 61 AMX-30Gs have been retired from service.
  •  Nigeria: 16 units[146]
  •  Qatar: In 1977, Qatar ordered 30 AMX-30Bs and 24 additional AMX-30B2s in 1987. As of 2019, 30 units are in service alongside 32 Leopard 2A7+.[147]
  •  Saudi Arabia: Saudi Arabian Army acquired 250 units, now in reserve (also ordered 53 AMX-30 DCA, in the late 1970s, which may still be in reserve, and 12 AMX-30H bridgelayers.)[148]
  •  Venezuela: 80 AMX-30V2 units from 82 AMX-30B purchased and 4 AMX-30D after upgrade (on modernization as January 2019).[149][150]

Former operators

References

  1. ^ Foss (2006), p. 30
  2. ^ a b c d Ogorkiewicz, p. 2
  3. ^ de Mazarrasa (1990), p. 7
  4. ^ de Mazarrasa (1990), pp. 7–8
  5. ^ a b c de Mazarrasa (1990), p. 8
  6. ^ Miller, pp. 84–85
  7. ^ a b c Jeudy, p. 215
  8. ^ Ogorkiewicz, pp. 2–3
  9. ^ a b c Ogorkiewicz, p. 3
  10. ^ de Mazarrasa (1990), pp. 8–9
  11. ^ These were delivered between 1954 and 1956; Zaloga (1999), p. 13
  12. ^ a b c Miller, p. 85
  13. ^ a b c d Jeudy, p. 252
  14. ^ Spielberger, p. 113
  15. ^ a b c d e f g h Jeudy, p. 253
  16. ^ Spielberger, p. 124
  17. ^ a b c Caiti, p. 33
  18. ^ Ogorkiewicz, pp. 3–5
  19. ^ Hilmes, pp. 16–17
  20. ^ Mercillon, p. 38
  21. ^ de Mazarrasa (1990), p. 9
  22. ^ Foss (1986), p. 21
  23. ^ a b c d e Jeudy, p. 254
  24. ^ a b Ogorkiewicz, p. 5
  25. ^ Jerchel, p. 3
  26. ^ Jerchel, pp. 3–4
  27. ^ a b Jerchel, p. 4
  28. ^ a b c d Spielberger, p. 128
  29. ^ Jerchel, p. 6
  30. ^ Jerchel, p. 7
  31. ^ Spielberger, p. 117
  32. ^ Hilmes, p. 17
  33. ^ Simpkin, p. 139
  34. ^ a b c Ogorkiewicz, p. 6
  35. ^ a b Jeudy, p. 255
  36. ^ Crow, p. 140
  37. ^ a b c Ogorkiewicz, p. 8
  38. ^ a b Foss (1976), p. 14
  39. ^ de Mazarrasa (1990), p. 28
  40. ^ a b c Foss (1986), p. 28
  41. ^ Miller, p. 88; de Mazarrasa (1990), p. 28
  42. ^ de Mazarrasa (1990), pp. 21–22
  43. ^ The gun was protected from bending with a magnesium alloy thermal sleeve; Ogorkiewicz, p. 8
  44. ^ Ferrari, p. 87
  45. ^ a b c Caiti, p. 34
  46. ^ de Mazarrasa (1990), p. 23
  47. ^ a b de Mazarrasa (1990), p. 22
  48. ^ de Mazarrasa (1990), p. 24
  49. ^ Ogorkiewicz, p. 9
  50. ^ de Mazarrasa (1990), p. 26
  51. ^ de Mazarrasa (1990), p. 27
  52. ^ Ogorkiewicz, p. 10
  53. ^ Ogorkiewicz, pp. 9–10
  54. ^ Jeudy, p. 257
  55. ^ Crow, p. 141
  56. ^ a b Jeudy, p. 256
  57. ^ de Mazarrasa (1990), p. 71
  58. ^ a b c Caiti, p. 37
  59. ^ a b Miller, p. 89
  60. ^ Foss (1986), p. 24
  61. ^ Bishop, p. 220
  62. ^ de Mazarrasa (1990), p. 72
  63. ^ Simpkin, p. 106
  64. ^ a b c d Foss (2005), p. 30
  65. ^ Jeudy, p. 265
  66. ^ Foss (2003), p. 429
  67. ^ Berthemy, p. 18
  68. ^ Berthemy, p. 17
  69. ^ MH (May 1996). Lightweight add-on armour improves tank protection. Jane's International Defense Review. p. 17.
  70. ^ Biass & Richardson, p. 62
  71. ^ Nikolskiy, M.; Baryatinskiy, M. (2007). ""Леклерк" и другие французские основные боевые танки". Бронеколлекция 2007 № 05 (74) (in Russian). Moscow: Редакция журнала "Моделист-конструктор". pp. 12–14.
  72. ^ Lathrop & McDonald, p. 28
  73. ^ Jerchel, p. 28
  74. ^ Ogorkiewicz, p. 20
  75. ^ Zaloga (2004), p. 29
  76. ^ Zaloga (1979), p. 20
  77. ^ "T-64". www.militaryfactory.com.
  78. ^ a b Hunnicutt, R.P. (1984). Patton: A History of the American MBT. Presidio. p. 440.
  79. ^ "T-64 Main Battle Tank". www.inetres.com.
  80. ^ Gelbart, p. 21
  81. ^ a b Foss (1986), p. 40
  82. ^ a b Foss (1986), p. 94
  83. ^ a b Foss (1986), p. 87
  84. ^ Foss (1986), p. 138
  85. ^ Foss (1976), p. 16
  86. ^ Jeudy, p. 260
  87. ^ a b Ogorkiewicz, p. 14
  88. ^ Ogorkiewicz, pp. 14–16
  89. ^ de Mazarrasa (1990), p. 36
  90. ^ Ogorkiewicz, p. 16
  91. ^ de Mazarrasa (1990), p. 37
  92. ^ Ogorkiewicz, pp. 16–18
  93. ^ de Mazarrasa (1990), pp. 37–38
  94. ^ AMX-30H AVLB
  95. ^ "The AMX-30H AVLB Bridgelayer". July 15, 2014. Archived from the original on December 31, 2017. Retrieved June 29, 2021.
  96. ^ a b de Mazarrasa (1990), p. 38
  97. ^ Ogorkiewicz, pp. 18–19
  98. ^ de Mazarrasa (1990), p. 39
  99. ^ Ogorkiewicz, pp. 19–20
  100. ^ de Mazarrasa (1990), pp. 39–40
  101. ^ de Mazarrasa (1990), p. 40
  102. ^ Orgokiewicz, p. 20
  103. ^ de Mazarrasa (1990), pp. 40–41
  104. ^ Jeudy, p. 262
  105. ^ Miller, pp. 90–93
  106. ^ a b de Mazarrasa (1990), p. 47
  107. ^ Senger und Etterlin, p. 125
  108. ^ Foss (1986), p. 167
  109. ^ Miller, p. 8
  110. ^ Jeudy, p. 261
  111. ^ de Mazarrasa (1990), pp. 47–48
  112. ^ Foss (2005), p. 27
  113. ^ Moncure, p. 38
  114. ^ Moncure, p. 39
  115. ^ Dunstan, p. 13
  116. ^ Chant, p. 316
  117. ^ a b de Mazarrasa (1990), p. 48
  118. ^ Rudnick, pp. 199, 203
  119. ^ Rudnick, p. 202
  120. ^ Rudnick, pp. 203–204
  121. ^ de Mazarrasa (1990), pp. 57–61
  122. ^ Pérez-Guerra, p. 500
  123. ^ de Mazarrasa (1990), pp. 79–80
  124. ^ de Mazarrasa (1990), pp. 80–83
  125. ^ de Mazarrasa (1990), pp. 83–84
  126. ^ (in Spanish) Defensa gastar a 916 millones en destruir 480 carros de combate, El País, accessed 9 December 2008
  127. ^ (in Spanish) Defensa firma un contrato de 200 millones de euros con Finmeccanica, El País, accessed 9 December 2008
  128. ^ a b de Mazarrasa (1990), pp. 48–49
  129. ^ Cordesman, pp. 11–12
  130. ^ Cordesman, p. 11
  131. ^ Cordesman, pp. 13–14
  132. ^ Cordesman, pp. 16–17
  133. ^ de Mazarrasa (1990), pp. 72–73
  134. ^ de Mazarrasa (1990), p. 49
  135. ^ Foss (2005), p. 32
  136. ^ Westermeyer, p. 27
  137. ^ a b Roblin, Sebastien (13 November 2020). "Use has put France Leclerc tank to work in Yemen". The National Interest.
  138. ^ Perrett, p. 201
  139. ^ Rottman, p. 26
  140. ^ a b c d Jeudy, p. 263
  141. ^ Cogan, p. 44
  142. ^ Scales, p. 217
  143. ^ "XVIII Airborne Corps Desert Storm Chronology 24–28 February 1991". United States Army Center of Military History. Archived from the original on 2009-05-08. Retrieved 2008-12-18.
  144. ^ Direction du renseignement militaire (25 September 2018). "Principaux matériels saoudiens engagés dans le conflit yéménite" (PDF) (in French) – via disclose.ngo.
  145. ^ Delalande, Arnaud (November 2015). "Retour sur l'intervention de la coalition arabe". Défense et Sécurité Internationale (in French) (119): 63.
  146. ^ Martin, Guy (7 October 2013). "Nigerian Armed Forces – defenceWeb".
  147. ^ Lagneau, Laurent (13 March 2019). "Le Qatar aurait commandé 100 chars Altay à la Turquie". opex360.com (in French).
  148. ^ "AMX-30 DCA". Weaponsystems.net.
  149. ^ González, Miguel (January 2019). "España moderniza los tanques de Venezuela pese al embargo de la UE". El País. Retrieved 2019-01-02.
  150. ^ "Rajoy autorizó venta de repuestos para tanques del Ejército venezolano pese al embargo". Tal Cual. 31 December 2018. Retrieved 2019-01-02.
  151. ^ InfoDefensa, Revista Defensa. "Chile, de compras desde la década de los 80". Infodefensa - Noticias de defensa, industria, seguridad, armamento, ejércitos y tecnología de la defensa (in Spanish). Retrieved 2023-09-01.
  152. ^ "Forecast International: Intelligence Center".
  153. ^ Nesme, Jean-Marc (2 March 2011). "RAPPORT AU NOM DE LA COMMISSION DES AFFAIRES ÉTRANGÈRES SUR LE PROJET DE LOI, adopté par le Sénat, autorisant l'approbation de l'accord entre le Gouvernement de la République française et le Gouvernement de la République d'Irak relatif à la coopération dans le domaine de la défense" [REPORT ON BEHALF OF THE FOREIGN AFFAIRS COMMITTEE ON THE BILL, adopted by the Senate, authorizing the approval of the agreement between the Government of the French Republic and the Government of the Republic of Iraq relating to cooperation in the field of the defense] (PDF). www.assemblee-nationale.fr (in French).

Sources

External links

This page is based on the copyrighted Wikipedia article: AMX-30. Articles is available under the CC BY-SA 3.0 license; additional terms may apply.Privacy Policy