ATSC tuner

Edit links
Source: Wikipedia, the free encyclopedia.
Multiple MPEG programs are combined then sent to a transmitting antenna. In the US broadcast digital TV system, an ATSC receiver then decodes the TS and displays it on a TV.

An ATSC (Advanced Television Systems Committee) tuner, often called an ATSC receiver or HDTV tuner, is a type of

VCR, digital video recorder (DVR), or set-top box which provides audio/video output connectors of various types.[citation needed
]

Another type of television tuner is a digital television adapter (DTA) with an analog passthrough.[citation needed]

Technical overview

The terms "tuner" and "receiver" are used loosely, and it is perhaps more appropriately called an ATSC receiver, with the tuner being part of the receiver (see

TV sets, will stretch automatically, either by detecting black bars or by reading the Active Format Description (AFD).[citation needed
]

Operation

An ATSC tuner works by generating audio and video signals that are picked up from over-the-air

broadcast television. ATSC tuners provide the following functions: selective tuning; demodulation; transport stream demultiplexing; decompression; error correction; analog-to-digital conversion; AV synchronization; and media reformatting to fit the specific type of TV screen optimally.[citation needed
]

Selective tuning

Selective tuning is the process by which the

band of transmitted RF signals. The tuner usually performs the function of frequency-agile selection, along with rejection of unwanted out-of-band signals.[citation needed
]

Demodulation

"Demodulation" means transforming the signal from the tuner into a signal that a TV set can use to produce images and sound without further consideration for the frequency at which it was transmitted. It is separation of a standard

multipath distortion and therefore better received in mobile installations).[citation needed
]

Transport stream

In the US, multiple digital signals are combined and then transmitted from one antenna source to create over the air broadcasts. By the reverse process (

demultiplexing), an ATSC receiver first receives the combined MPEG transport stream and then decodes it to display one of its component signals on a TV set.[citation needed
]

Decompression

Since digital signals that are broadcast over the air are compressed (packed smaller), once they are received by the ATSC tuner, these compressed packets of digital data are then decompressed (unpacked to their original size). The ATSC system uses lossy compression, so while the decompressed data size is the same as the original compressed data size, the data produced is not exactly the same as the original data fed into the system at the transmitting site, but it is close enough that most people will not notice a difference.[citation needed]

Error correction

Error correction is a technology that is used by the ATSC tuner to make sure that any data that is missing can be corrected. For instance, sometimes interference or a poor-quality signal will cause the loss of some data that the ATSC tuner receives. With error correction, the tuner has the ability to perform a number of checks and repair data so that a signal can be viewed on a TV set. Error correction works by adding some extra information to the signal before transmission that can be used upon reception to fill in gaps. Therefore, error correction has the opposite effect of compression—it increases the amount of data to transmit, rather than reducing it like compression does, and it improves the quality and robustness of the signal rather than reducing it. Compression removes redundant (and some non-redundant) data, while error correction adds some redundant data. The reason for using error correction rather than just using less compression and keeping the redundancy that was already there is that error correction systems are specially designed to get the maximum benefit out of a very small amount of redundant data, whereas the natural redundancy of the data doesn't do this job as efficiently, so with error correction the net amount of data needed is still smaller.[citation needed
]

AV synchronization

AV synchronization is the coordination of audio and video signals being displayed on a digital TV in proper time. AV synchronization ensures that the audio does not lag behind the video that is being displayed on the TV set or vice versa, so that both audio and video are in sync.[citation needed]

Image reformatting

Media reformatting is extremely important because the formatting of images on TV sets differs significantly according to the technology employed. For instance, some televisions have an

progressive-scan picture. Different televisions have a different aspect ratio.[citation needed
]

United States government mandates

Main article: Digital television transition in the United States

The FCC has issued the following mandates for devices entering the US:[1][2][3]

  • By July 1, 2005 all televisions with screen sizes over 36 inches (91 cm) must include a built-in ATSC DTV tuner.
  • By March 1, 2006 all televisions with screen sizes over 25 inches (64 cm) must include a built-in ATSC DTV tuner.
  • By March 1, 2007 all televisions regardless of screen size, and all interface devices that include a tuner (VCR, DVD player/recorder, DVR) must include a built-in ATSC DTV tuner.

Devices manufactured before these dates can still be sold without a built-in ATSC DTV tuner; the lack of digital tuners legally must be disclosed to consumers and most name-brand retailers have incurred FCC penalties for non-compliance with these requirements.[4]

The current regulations are specified in the U.S. Code of Federal Regulations (CFR).[5]

Analog TV broadcast switch-off

For Low-Power Television Stations, see Digital television transition in the United States.

In early 2006 the US Deficit Reduction Act of 2005[6] became law, which calls for full-power over-the-air television stations to cease their analog broadcasts by February 17, 2009[7] (this cut-off date had been moved several times previously). On February 11, 2009,[8] the mandatory DTV broadcast date was moved again to June 12, 2009, although stations were allowed to switch earlier. The delay enabled distribution of more coupons for purchase of converter boxes.[9]

As of June 12, 2009, TVs and other equipment with legacy NTSC tuners are unable to receive over-the-air broadcasts from United States TV stations, unless the broadcast is from a repeater or low-power transmitter. However, Class-A stations shut down analog transmissions on September 1, 2015 followed by a complete shutdown of all low-power and repeater stations by July 13, 2021. Canada had a similar analog TV termination date set to September 1, 2011 (except in some remote northern regions).[citation needed]

It was feared that the US switch-off would cause millions of non-cable- and non-satellite-connected TV sets to "go dark". Viewers who did not upgrade, either to a television with a digital tuner or a set-top box, ended up losing their only source of television, unless they relied only upon the aforementioned non-full-power broadcasters. A Congressional bill authorized subsidized converter boxes in a way that allowed viewers to receive the new digital broadcasts on their old TVs. The transition proceeded with about 235,000 people requesting coupons after the June 12, 2009, transition date.[10]

Two $40 coupons were made available per US address[11] nominally from January 1, 2008, through March 31, 2009; each coupon could be used toward the purchase of one approved coupon-eligible converter box. The coupons expired 90 days after initial mailing and were not renewable. All households were eligible to receive coupons from the initial $990 million allocated, after which an additional $510 million in coupons was to be available to households that rely exclusively on over-the-air television reception. On January 4, 2009, the coupon program reached its US$1.34 billion ceiling[12] and any further consumer requests were placed on a waiting list.[13]

Canadian government mandates

Main article: Digital television in Canada

In Canada, the Canadian Radio-television and Telecommunications Commission (CRTC) had set August 31, 2011, as the date on which over-the-air analog TV transmission service would cease in 31 major markets of the country, including all provincial capitals, plus Ottawa (the national capital), and most other major urban centers.[14]

As of the end of 2008, there were 22

HDTV FTA receivers, and personal computer TV tuner cards.[citation needed
]

As of the beginning of 2012, almost all Canadian broadcasters are broadcasting an ATSC signal, with a handful of exceptions granted for low-power and regional stations. These signals can be reliably tuned in most cities with a good indoor antenna and an ATSC tuner. US-based ATSC signals can be reliably tuned with an outdoor antenna and an ATSC tuner in Canadian markets within 60 miles of the US broadcast towers. These markets include Toronto (from Buffalo), Windsor (from Detroit and Toledo), Vancouver (from Seattle and Tacoma), Montreal (from Burlington and Plattsburgh), Ottawa (from Watertown and Plattsburgh), and Fredericton (from Presque Isle). Indoor antennas (both passive and amplified) are easier to install, but outdoor antennas are better at tuning stations from further distances.[citation needed]

Setup and operation

Most ATSC tuners have relatively simple on-screen menus, and automatically bring the user to a

PSIP data, and adds its virtual channels to the channel map. If no PSIP is transmitted, the physical channel number is used, and each transport stream is enumerated according to its TSID (converted from hexadecimal), or starting sequentially at .1, .2, .3, and so forth, depending on the tuner.[citation needed
]

Several TV stations are using or have used a temporary channel to send their DTV signals and, upon terminating analog transmission, move their digital transmission either back to their old analog channel, or to a third channel (sometimes the former analog of another local station), chosen in the

favorites". This may also leave the old "dead" channel mapping in place, so that there is the new 8.1, dead 8.1, new 8.2, dead 8.2, etc. In most cases, TV stations will not have the actual frequency they are currently using on their website. If the auto scan does not pick up the signal and the tuner has manual frequency scan capability try to get the actual frequency from the station engineer. This may allow one to stay on one frequency (channel) versus "scanning" (moving too quickly through) and allow one to make antenna adjustments while observing only a problematic channel.[citation needed
]

Other errors which appear to be in the tuner are actually the result of incorrect data sent by one or more stations, often including missing

TV Guide On Screen can also be used for this, but very few if any ATSC tuners include this (which requires downloading all guide data for all channels from one particular station). Stations sending the wrong time are also a major problem, as this can skew or ruin guide data for all stations until the correct time is received again from a different and correctly set station.[citation needed
]

Manual tuning

Each digital OTA channel number is composed of a main number and a subchannel, for example 4.1, 4.2, etc. A dash is an alternate form of representation: 4–1, 4–2... The dot and dash are interchangeable; they both mean the same thing. The main channel numbers refer to the same radio frequencies as previously. However, now "virtual channel" (technically known as logical channel number) numbers are common. So, Channel 4 digital signals may now actually be broadcast on channel 43, or any other frequency. When the ATSC tuner does a channel scan, it finds the signal on channel 43, learns that this material is called "Channel 4", and remembers that mapping. The user can tune to "4", and the tuner will know to tune in 43. Before a scan is done, it may be possible to access the programs directly by manual tuning, by entering 43–1, 43–2... After the scan, the programs would usually be accessed by entering 4–1, 4-2 etc., but it may still be possible to also access them directly at 43 as long as it is also not the same as an already assigned channel. If stations change their broadcast frequencies, it may be possible to access the new frequencies directly as long as it is also not the same as an already assigned channel in which case it will go to that channel instead of the frequency, but the usual procedure is to re-scan all of the channels which will just assign multiple version of any overlapping channels.[citation needed]

See also

References

  1. ^ "FCC INTRODUCES PHASE-IN PLAN FOR DTV TUNERS" (PDF). FCC. 2002-08-08. Retrieved 2006-06-05.[permanent dead link]
  2. ^ "Requirements for Digital Television Receiving Capability" (PDF). FCC. 2005-11-08. Archived from the original (PDF) on 2006-04-20. Retrieved 2006-06-05.
  3. ^ "FCC Moves Up DTV Tuner Date, Broadens Scope". TWICE. 2005-11-21. Archived from the original on 2007-02-05. Retrieved 2006-08-30.
  4. ^ FCC, April 10, 2008: FCC adopts DTV enforcement orders totaling over $6 million
  5. ^ "CFR Title 47: Telecommunication; PART 15—RADIO FREQUENCY DEVICES; § 15.117 TV broadcast receivers" (PDF). FCC. 2006-10-01. Retrieved 2015-11-23.
  6. ^ Pub. L. No. 109-171, 120 Stat. 4 (February 8, 2006).
  7. ^ "Senate approves 2009 for end of analog TV". NBC News. 2005-11-04. Retrieved June 5, 2006. Section 3002 of the Act amends 47 U.S.C. section 309(j)(14) to provide for the February 17, 2009, deadline.
  8. ^ Hachman, Mark (February 11, 2009). "Obama Makes DTV Delay Official". PCMAG. Retrieved February 12, 2009.
  9. ^ "Congress Delays Troubled Switch To Digital TV". The Washington Post. Archived from the original on 2017-03-18.
  10. ^ "FCC CONTINUES DTV OUTREACH ACROSS THE NATION" (PDF) (Press release). Federal Communications Commission. June 15, 2009. Retrieved 2013-08-07.
  11. ^ "Commerce Department Issues Final Rule To Launch Digital-to-Analog Converter Box Coupon Program". NTIA. 2007-03-12. Archived from the original on 14 March 2007. Retrieved 2007-03-12.
  12. ^ "Commerce's NTIA Welcomes Congressional Action on DTV Delay as Opportunity for More Americans to Prepare for the End of the Digital TV Transition".
  13. ^ "Archived copy". Archived from the original on 2009-04-03. Retrieved 2018-06-03.{{cite web}}: CS1 maint: archived copy as title (link)
  14. ^ "Broadcasting Regulatory Policy CRTC 2010-167" (Press release). Canadian Radio-television and Telecommunications Commission. 2010-03-22. Archived from the original on 2010-03-26. Retrieved 2010-03-22.

Bibliography

External links

Retrieved from "https://en.wikipedia.org/w/index.php?title=ATSC_tuner&oldid=1215830589"