Chroma key

Source: Wikipedia, the free encyclopedia.

The practicality of green-screen compositing is demonstrated by actor Iman Crosson in a self-produced video.
Top panel: A frame in a full-motion video shot in the actor's living room.[1]
Bottom panel: The corresponding frame in the final version in which the actor impersonates Barack Obama "appearing" outside the White House's East Room.[2]

Chroma key compositing, or chroma keying, is a

human skin colour. No part of the subject being filmed or photographed may duplicate the colour used as the backing, or the part may be erroneously identified as part of the backing.[4]

It is commonly used for live

Rotoscopy may instead be carried out on subjects that are not in front of a green (or blue) screen. Motion tracking
can also be used in conjunction with chroma keying, such as to move the background as the subject moves.

History

Predecessors

Prior to the introduction of

garbage matte to expose only the window areas.[5]

In order to have figures in one exposure actually move in front of a substituted background in the other, a travelling matte was needed, to occlude the correct portion of the background in each frame. In 1918 Frank Williams patented a travelling matte technique, again based on using a black background. This was used in many films, such as The Invisible Man.[6]: 4 

In the 1920s, Walt Disney used a white backdrop to include human actors with cartoon characters and backgrounds in his Alice Comedies.[6]: 5 

From bluescreen to greenscreen

The blue screen method was developed in the 1930s at

Warner Brothers employee and ex-Kodak researcher Arthur Widmer began working on an ultraviolet travelling matte process. He also began developing bluescreen techniques: one of the first films to use them was the 1958 adaptation of the Ernest Hemingway novella, The Old Man and the Sea, starring Spencer Tracy.[7]

The name "Chroma-Key" was RCA's trade name for the process, as used on its NBC television broadcasts, incorporating patents granted to RCA's Albert N. Goldsmith.[8] A very early broadcast use was NBC's George Gobel Show in fall 1957.[9]

Petro Vlahos was awarded an Academy Award for his refinement of these techniques in 1964. His technique exploits the fact that most objects in real-world scenes have a colour whose blue-colour component is similar in intensity to their green-colour component. Zbigniew Rybczyński also contributed to bluescreen technology. An optical printer with two projectors, a film camera and a "beam splitter", was used to combine the actor in front of a blue screen together with the background footage, one frame at a time. In the early 1970s, American and British television networks began using green backdrops instead of blue for their newscasts. During the 1980s, minicomputers were used to control the optical printer. For the film The Empire Strikes Back, Richard Edlund created a "quad optical printer" that accelerated the process considerably and saved money. He received a special Academy Award for his innovation.

For decades, travelling matte shots had to be done "locked-down", so that neither the matted subject nor the background could shift their camera perspective at all. Later, computer-timed, motion-control cameras alleviated this problem, as both the foreground and background could be filmed with the same camera moves.

Meteorologists on television often use a field monitor, to the side of the screen, to see where they are putting their hands against the background images. A newer technique is to project a faint image onto the screen.

Some films make heavy use of chroma key to add backgrounds that are constructed entirely using computer-generated imagery (CGI). Performances from different takes can be composited together, which allows actors to be filmed separately and then placed together in the same scene. Chroma key allows performers to appear to be in any location without leaving the studio.

Advances in computer technology have simplified the

incorporation of motion into composited shots, even when using handheld cameras. Reference points such as a painted grid, X's marked with tape, or equally spaced tennis balls attached to the wall, can be placed onto the coloured background to serve as markers. In post-production, a computer can use these markers to compute the camera's position and thus render an image that matches the perspective and movement of the foreground perfectly. Modern advances in software and computational power have eliminated the need to accurately place the markers ⁠— ⁠the software figures out their position in space; a potential disadvantage of this is that it requires camera movement, possibly contributing to modern cinematographic
techniques whereby the camera is always in motion.

Process

Film set for The Spiderwick Chronicles, where a visual effects scene using bluescreen chroma key is in preparation

The principal subject is filmed or photographed against a background consisting of a single colour or a relatively narrow range of colours, usually blue or green because these colours are considered to be the furthest away from skin tone.

keying
", "keying out" or simply a "key".

Processing a green backdrop

Green is used as a backdrop for TV and electronic cinematography more than any other colour because television weather presenters tended to wear blue suits. When chroma keying first came into use in television production, the blue screen that was then the norm in the movie industry was used out of habit, until other practical considerations caused the television industry to move from blue to green screens. Broadcast-quality colour television cameras use separate red, green and blue image sensors, and early analog TV chroma keyers required RGB component video to work reliably. From a technological perspective it was equally possible to use the blue or green channel, but because blue clothing was an ongoing challenge, the green screen came into common use. Newscasters sometimes forget the chroma key dress code, and when the key is applied to clothing of the same colour as the background, the person would seem to disappear into the key. Because green clothing is less common than blue, it soon became apparent that it was easier to use a green matte screen than it was to constantly police the clothing choices of on-air talent. Also, because the human eye is more sensitive to green wavelengths, which lie in the middle of the visible light spectrum, the green analog video channel typically carried more signal strength, giving a better signal to noise ratio compared to the other component video channels, so green screen keys could produce the cleanest key. In the digital television and cinema age, much of the tweaking that was required to make a good quality key has been automated. However, the one constant that remains is some level of colour coordination to keep foreground subjects from being keyed out.[10]

Processing a blue backdrop

Before electronic chroma keying, compositing was done on (chemical) film. The camera colour negative was printed onto high-contrast black and white negative, using either a filter or the high contrast film's colour sensitivity to expose only blue (and higher) frequencies. Blue light only shines through the colour negative where there is not blue in the scene, so this left the film clear where the blue screen was, and opaque elsewhere, except it also produced clear for any white objects (since they also contained blue). Removing these spots could be done by a suitable double-exposure with the colour positive (thus turning any area containing red or green opaque), and many other techniques. The result was film that was clear where the blue screen was, and opaque everywhere else. This is called a female matte, similar to an

alpha matte
in digital keying. Copying this film onto another high-contrast negative produced the opposite male matte. The background negative was then packed with the female matte and exposed onto a final strip of film, then the camera negative was packed with the male matte and was double-printed onto this same film. These two images combined creates the final effect.

Major factors

The most important factor for a key is the colour separation of the foreground (the subject) and background (the screen) – a blue screen will be used if the subject is predominantly green (for example plants), despite the camera being more sensitive to green light.

In analog television, colour is represented by the phase of the chroma subcarrier relative to a reference oscillator. Chroma key is achieved by comparing the phase of the video to the phase corresponding to the pre-selected colour. In-phase portions of the video are replaced by the alternate background video.

In digital colour TV, colour is represented by three numbers (red, green, blue intensity levels). Chroma key is achieved by a simple numerical comparison between the video and the pre-selected colour. If the colour at a particular point on the screen matches (either exactly, or in a range), then the video at that point is replaced by the alternate background.

Lighting

In order to create an illusion that characters and objects filmed are present in the intended background scene, the lighting in the two scenes must be a reasonable match. For outdoor scenes, overcast days create a diffuse, evenly coloured light which can be easier to match in the studio, whereas direct sunlight needs to be matched in both direction and overall colour based on time of day.

A studio shot taken in front of a green screen will naturally have ambient light the same colour as the screen, due to its light scattering. This effect is known as spill.[6]: p20  This can look unnatural or cause portions of the characters to disappear, so must be compensated for, or avoided by using a larger screen placed far from the actors.[11]

Camera

The depth of field used to record the scene in front of the coloured screen should match that of the background. This can mean recording the actors with a larger depth of field than normal.[12]

Clothing

A person wearing blue clothing in front of green screen. The shadows cast onto the green screen are not ideal (see even lighting).

A chroma key subject must avoid wearing clothes which are similar in colour to the chroma key colour(s) (unless intentional e.g., wearing a green top to make it appear that the subject has no body), because the clothing may be replaced with the background image/video. An example of intentional use of this is when an actor wears a blue covering over a part of his body to make it invisible in the final shot. This technique can be used to achieve an effect similar to that used in the Harry Potter films to create the effect of an invisibility cloak. The actor can also be filmed against a chroma-key background and inserted into the background shot with a distortion effect, in order to create a cloak that is marginally detectable.[13]

Difficulties emerge with blue screen when a costume in an effects shot must be blue, such as Superman's traditional blue outfit. In the 2002 film Spider-Man, in scenes where both Spider-Man and the Green Goblin are in the air, Spider-Man had to be shot in front of a green screen and the Green Goblin had to be shot in front of a blue screen. The colour difference is because Spider-Man wears a costume which is red and blue in colour and the Green Goblin wears a costume which is entirely green in colour. If both were shot in front of the same screen, parts of one character would be erased from the shot.

For a clean division of foreground from background, it is also important that clothing and hair in the foreground shot have a fairly simple silhouette, as fine details such as frizzy hair may not resolve properly. Similarly, partially transparent elements of the costume cause problems.[12]

Background colour

Demonstration of the creation of visual effects techniques using chroma key

Blue was originally used for the film industry as making the separations required a film that would only respond to the screen colour, and film that responded only to blue and higher frequencies (ultraviolet, etc) was far easier to manufacture and make reliable than film that somehow excluded both frequencies higher and lower than the screen colour.

In television and digital film making, however, it is equally easy to extract any colour, and green quickly became the favoured colour. Bright green is less likely to be in the foreground objects, colour film emulsions usually had much finer grain in the green, and lossy compression used for analog video signals and digital images and movies retain more detail in the green channel. Green can also be used outdoors where the light colour temperature is significantly blue. Red is avoided as it is in human skin, and any other colour is a mix of primaries and thus produces a less clean extraction.

A so-called "yellow screen" is accomplished with a white backdrop. Ordinary stage lighting is used in combination with a bright yellow sodium lamp. The sodium light falls almost entirely in a narrow frequency band, which can then be separated from the other light using a prism, and projected onto a separate but synchronized film carrier within the camera. This second film is high-contrast black and white, and is processed to produce the matte.[6]: 16 

A newer technique is to use a

emerald green
LEDs.

There is also a form of colour keying that uses light spectrum invisible to human eye. Called Thermo-Key, it uses infrared as the key colour, which would not be replaced by background image during postprocessing.[14][15]

For

fluorescent orange backdrop which made it easier to generate a holdout matte, thus allowing the effects team to produce effects in a quarter of the time needed for other methods.[16]

In principle, any type of still background can be used as a chroma key instead of a solid colour. First the background is captured without actors or other foreground elements; then the scene is recorded. The image of the background is used to cancel the background in the actual footage; for example in a digital image, each pixel will have a different chroma key. This is sometimes referred to as a difference matte.[17] However, this makes it easy for objects to be accidentally removed if they happen to be similar to the background, or for the background to remain due to camera noise or if it happens to change slightly from the reference footage.[18] A background with a repeating pattern alleviates many of these issues, and can be less sensitive to wardrobe colour than solid-colour backdrops.[19]

There is some use of the specific full-intensity magenta colour #FF00FF in digital colour images to encode (1-bit) transparency; this is sometimes referred to as "magic pink".[20] This is not a photographic technique and the extraction of the foreground from the background is trivial.

Tolerances

Even lighting

Myx TV
using green-screen chroma key. Note the lack of shadows on the screen. The whiter area near the center of the image is due to the angle this photo was taken from, and would not appear from the video camera's angle.

The biggest challenge when setting up a blue screen or green screen is even lighting and the avoidance of shadow because it is best to have as narrow a colour range as possible being replaced. A shadow would present itself as a darker colour to the camera and might not register for replacement. This can sometimes be seen in low-budget or live broadcasts where the errors cannot be manually repaired or scenes reshot. The material being used affects the quality and ease of having it evenly lit. Materials which are shiny will be far less successful than those that are not. A shiny surface will have areas that reflect the lights making them appear pale, while other areas may be darkened. A matte surface will diffuse the reflected light and have a more even colour range. In order to get the cleanest key from shooting green screen, it is necessary to create a value difference between the subject and the green screen. In order to differentiate the subject from the screen, a two-stop difference can be used, either by making the green screen two stops higher than the subject, or vice versa.

Sometimes a shadow can be used to create a visual effect. Areas of the blue screen or green screen with a shadow on them can be replaced with a darker version of the desired background video image, making it look like the person is casting a shadow on them. Any spill of the chroma key colour will make the result look unnatural. A difference in the focal length of the lenses used can affect the success of chroma key.

Exposure

Another challenge for blue screen or green screen is proper

camera exposure. Underexposing or overexposing a coloured backdrop can lead to poor saturation levels. In the case of video cameras, underexposed images can contain high amounts of noise
, as well. The background must be bright enough to allow the camera to create a bright and saturated image.

Programming

There are several different quality- and speed-optimised techniques for implementing colour keying in software.[21][22]

In most versions, a function f(r, g, b) → α is applied to every pixel in the image. α (alpha) has a meaning similar to that in alpha compositing techniques. α ≤ 0 means the pixel is fully in the green screen, α ≥ 1 means the pixel is fully in the foreground object, and intermediate values indicate the pixel is partially covered by the foreground object (or it is transparent). A further function g(rgb) → (rgb) is needed to remove green spill on the foreground objects.

A very simple f() function for green screen is A(r+b) − Bg where A and B are user adjustable constants with a default value of 1.0. A very simple g() is (r, min(g,b), b). This is fairly close to the capabilities of analog and film-based screen pulling.

Modern examples[22] of these functions are best described by two closed nested surfaces in 3D RGB space, often quite complex. Colours inside the inner surface are considered green screen. Colours outside the outer surface are opaque foreground. Colours between the surfaces are partially covered, they are more opaque the closer they are to the outer surface. Sometimes more closed surfaces are used to determine how to remove green spill. It is also very common for f() to depend on more than just the current pixel's colour, it may also use the (xy) position, the values of nearby pixels, the value from reference images or a statistical colour model of the scene,[23] and values from user-drawn masks. These produce closed surfaces in space with more than three dimensions.

A different class of algorithm tries to figure out a 2D path that separates the foreground from the background. This path can be the output, or the image can be drawn by filling the path with α = 1 as a final step. An example of such an algorithm is the use of

active contour. Most research in recent years[when?
] has been into these algorithms.

See also

References

  1. ^ From YouTube video "President Obama on Death of Osama SPOOF- BEHIND THE SCENES" posted to Crosson's secondary YouTube channel "Iman" on 8 May 2011.
  2. ^ The final (composite) video "President Obama on Death of Osama bin Laden (SPOOF)" posted to Crosson's YouTube channel "Alphacat" on 4 May 2011.
  3. ^ "What is Chroma Key?". Lumeo. Retrieved 3 July 2014.
  4. ^ a b "The Chroma Effect". Chroma Key Tutorial. BorisFX. Archived from the original on 15 March 2005. Retrieved 11 January 2010. If the foreground is a person then blue or green backing colour is recommended as these colours are not present in human flesh pigments. In fact, human skin colour is 70% red for all people regardless of race.
  5. .
  6. ^ .
  7. ^ "Illusions Take Home First Oscars". CRI English. 14 February 2005. Archived from the original on 15 March 2005. Retrieved 21 January 2009.
  8. ^ "Studio: The World--NBC Introduces 'Chroma-Key' to Extend Scope of TV Settings." Electronic Age, January 1958, 8.
  9. ^ Johnson, Erskine. "Video's Special Effects Men Becoming Master Magicians of Hollywood; Many Tricks." (NEA syndicated article) Gloversville (NY) Leader-Herald, 6 December 1957.
  10. ^ "The Keys To Chromakey: How To Use A Green Screen". Videomaker. Retrieved 23 October 2017.
  11. .
  12. ^ .
  13. ^ "Creating an invisible cape in After Effects". Library.creativecow.net. Archived from the original on 28 March 2019. Retrieved 20 July 2011.
  14. ^ "What is Thermo-Key?". University of Tokyo. Archived from the original on 21 February 2009. Retrieved 21 January 2009.
  15. S2CID 8378941
    .
  16. .
  17. .
  18. .
  19. .
  20. ^ "So you wanna make a theme?". skinyourscreen.com articles. Archived from the original on 29 October 2007. Retrieved 23 August 2008.
  21. ^ Ashihkmin, Michael. "High Quality Chroma Key". University of Utah. Archived from the original on 30 September 2018. Retrieved 23 February 2010.
  22. ^ a b Cannon, Edward. "Greenscreen code and hints".
  23. .

External links