Combat knife

Source: Wikipedia, the free encyclopedia.
(Redirected from
Combat knives
)
"F-S Fighting Knife", the famous Fairbairn–Sykes fighting knife, developed for Commandos during World War 2 and adopted by numerous Special Forces post-war.

A combat knife is a fighting knife designed for military use and primarily intended for hand-to-hand or close combat fighting.[1][2][3]

Since the end of trench warfare, most military combat knives have been secondarily designed for utility use (clearing foliage, chopping branches for cover, opening ammunition crates, etc.) in addition to their original role as close-quarter combat weapons, and may be referred to as "fighting-utility knives."[4][5] On the other hand, military knives that are intended primarily for use in a role other than combat are typically referred to by their primary role, such as "utility knife" or "survival knife".

History

Daggers designed for military usage in close combat engagements have been carried by soldiers for thousands of years. The adoption of combat daggers made of iron was a significant milestone in combat knife development, and such weapons were highly prized in the ancient armies of the Middle East.[6] French and Italian military daggers of the 14th century were the first to introduce the acutely tapered, sharply pointed and double-edged blade as a response to improvements made in armor design and the need to exploit weaknesses in armor protection.[7] The English and Scandinavians introduced a combat knife known as the "bollock dagger" into military service around 1350,[7] while the French poignard and the Scottish dirk were daggers designed from the outset as military weapons.

The rise in use of firearms led to a decline in the use of combat daggers and knives as military-issue weapons. However, privately purchased knives were often carried by foot soldiers for use both as auxiliary weapons and as utility tools. Some military forces issued knives for individual campaigns or for specialist troops such as pioneer or field engineer detachments, but these cutting tools were not primarily designed for use as combat knives.[8]

Modern combat knives

Soviet NR 43 Combat Knife

Formerly known as a trench knife, the "combat knife"[1] was used by both sides on the Western front during World War I. Since then, combat knives have been issued by the armies of many nations. Though they differ in detail, they all share the common characteristic of being purposely designed for military use, with their primary role as a close-quarters combat weapon.

World War II

During World War II, the British Fairbairn–Sykes fighting knife was designed by William E. Fairbairn and Eric A. Sykes, two former members of the Shanghai Municipal Police who trained many soldiers in close-quarters fighting.[4] The Fairbairn–Sykes knife inspired several similar knives of the era such as the V-42 stiletto designed by Lt. Colonel Robert T. Frederick who commanded the joint US and Canadian First Special Service Force and the United States Marine Raider stiletto designed by Lieutenant Colonel Clifford H. Shuey. In the USSR, the Red Army issued combat knives based on a single pattern known as the NR Series.[citation needed]

KA-BAR" USMC Combat Knife, the standard U.S. Marine Corps
combat knife during and after World War II

In late 1942, the U.S. Marine Corps adopted the 1219C2, later designated the "USMC Mark 2 Combat Knife," but better known in popular terminology as the

KA-BAR.[9] The KA-BAR differed from World War I-era U.S. combat knives in that it was designed as a dual-purpose item, adapted for both combat and as a utility knife.[9][10] It differed from earlier USMC knives such as the Marine Raider stiletto in that the new knife used a stout, wide blade with clip point that facilitated slashing attacks as well as blade thrusts.[11] Reports on the effectiveness of the new knife in jungle combat justified the Marine Corps' decision to designate the KA-BAR as the USMC's fighting knife for individual Marines.[10]

The U.S. Army adopted the

M3 Trench Knife in 1943 as its standard combat knife.[3] The M3 replaced the earlier World War I-vintage Mark I trench knife in combat service.[3] The M3 was a true combat knife, as it was designed solely for military use and was primarily intended as a fighting knife, though some compromises were made in the design to conserve strategic materials.[3][12][13] When adapted to utility tasks such as opening ration tins or ammunition boxes, the limitations of the M3 quickly became apparent.[12]

In the United States, Bo Randall began production of the "All Purpose Fighting Knife" giving it the designation of "Number 1" in his catalog. Between 1942 and 1945, Randall Made Knives produced 4,000 of these knives for battlefield use by US troops, with approximately 1,058 knives additionally subcontracted to Northampton Cutlery Company in Springfield, Massachusetts to meet wartime demand. In the 1950s Randall adopted the general pattern of the Bowie knife for several of his fighting knife designs.[14][15]

Post-World War II

The majority of military forces today have largely standardized the types of combat knife issued to soldiers. The Chilean Commando forces, for instance, are trained in the use of the

USMC Fighting Utility knife.[4]

Designed for military use, with input for Capt. George Ingraham, a combat surgeon in the U.S. Army's 94th Medical Detachment, the No. 14 Randall "Attack" Model was a popular combat knife designed for military use, and the knife was widely purchased by individual soldiers and Marines. During the conflict, Randall received feedback from Captain Ingraham, who requested serrations on the spine to cut through the fuselage of downed aircraft to rescue trapped personnel and a hollow handle to allow storage of survival gear. Randall made the changes and the result was the first of the modern survival knives.[15]

Another combat knife appearing during the Vietnam War was the

Bill Harsey, Jr. to design the Applegate-Fairbairn Combat Knife, so named because it was designed as an improvement on the Fairbairn–Sykes based upon discussions Applegate and Fairbairn had during World War II to eliminate the weaknesses of the F-S knife (e.g., weak blade point, inability to determine orientation of blade merely by grip). The first of these knives were made by Al Mar Knives, based on Harsey's designs.[20]

Knifemaker Bill Harsey later teamed up with

Modern Army Combatives Program, Matt Larsen, to design the LHR Combat knife.[22]

A modern KM2000 of the German Army
Glock Feldmesser FM 78 and its sheath

The German military uses the Eickhorn KM2000 as their standard issue knife. The design is a westernized Tantō, issued to the Bundeswehr. The blade is made of either 440A or N695 depending on different models. Some of them use 55Si7 spring steel. The knifemaker Eickhorn in Solingen, Germany has issued KCB-77 bayonets to the Canadian Military and the USMC. Apart from the KM2000 there are many other knives from Eickhorn, the KM3000, KM4000, KM5000, ParaCommando, and Aviator Series knives. The knives from Eickhorn are extremely sturdy and for professional use. Those knives are also preferred by military forces worldwide.[citation needed]

The Austrian Forces use the Glock knife. This is also used as a bayonet for the Steyr AUG bullpup rifle used by Austrian Forces. The blade is made of phosphated carbon steel. The handle is a special strong polymer manufactured by Glock. The Glock knife is also used by special forces around the world.[citation needed]

See also

References

  1. ^ (2001), p. 80: "Right at the outset trench knives were introduced by both sides during World War I, so that the common soldier was once again equipped with a knife designed primarily for combat."
  2. ^ Burton, Walter E., Knives For Fighting Men, Popular Science, July 1944, Vol. 145 No. 1, p. 150: A combat knife is specifically designed for military use, and is thus a more restrictive category than that of a fighting knife or tactical knife, either of which may include knives designed for civilian use. Thus, a bowie knife designed for civilian sale and use may be termed a fighting knife, but not a combat knife, while the U.S. Army's M3 trench knife, designed specifically for the military for close-quarters fighting, is both a combat knife and a fighting knife.
  3. ^ a b c d Catalog of Standard Ordnance Items, Washington, D.C: U.S. Army Ordnance Publications (1943)
  4. ^ .
  5. .
  6. (1981), p. 24
  7. ^ a b Walker (1993) p. 28
  8. . Retrieved 24 June 2013.
  9. ^ , p. 387
  10. ^ (2007), pp. 21-22
  11. ^ MCRP 3-02B: Close Combat, Washington, D.C.: Department Of The Navy, Headquarters United States Marine Corps, 12 February 1999: "Marines use slashing techniques to close with an enemy. Slashing techniques distract or damage an opponent so Marines can close in."
  12. ^ (1997), pp. 47-48
  13. ^ Whitman, L., New Army Trench Knife, Army & Navy Journal, Vol. 80, 6 February 1943, p. 649
  14. ^ Walker(1993) pp. 50-55
  15. ^ a b Pacella (2002)pp. 130-131
  16. . Retrieved 24 June 2013.
  17. .
  18. . Retrieved 24 June 2013.
  19. ^ Dick, Steven (November 2008). "Vietnam Legend Returns". Tactical Knives Magazine: 30.
  20. ^ Pacella (2002) p. 145
  21. ^ "Chris Reeve Knives - Optimum Quality, Optimum Performance". Archived from the original on 2012-06-07. Retrieved 2012-11-30.
  22. .

External links