Hillman Minx

Source: Wikipedia, the free encyclopedia.

Hillman Minx
Hillman Hunter
Hillman Avenger

The Hillman Minx was a

Singer, and Sunbeam
.

From the mid-1950s to the mid-1960s, the Minx and its derivatives were the greatest-volume sellers of the "Audax" family of cars from Rootes, which also included the

forms, with a 1496-cc engine.

The Hillman Super Minx was a slightly larger model offered during the Audax era.

Throughout the life of the Minx, there was usually an estate version—and, from 1954 to 1965, a short-wheelbase estate, the Hillman Husky, and a van derivative known as the Commer Cob.

The Minx model name was revived briefly – along with the "Rapier" name, as applied to the Sunbeam Rapier version of the Audax family – as a special edition late in the life of the

Talbot Solara cars, produced by Chrysler Europe
after its takeover of the Rootes Group.

Pre-WWII Minx

Hillman Minx
Hillman Minx 4-Door Saloon 1932
Overview
ProductionOctober 1931–1939

The original Minx was announced to the forewarned (in August) public 1 October 1931.[2] It was straightforward and conventional[3] with a pressed-steel body on separate chassis and 30 bhp 1185 cc engine producing cushioned power.[note 1] It was upgraded with a four-speed transmission in 1934 and a styling upgrade, most noticeably a slightly V-shaped grille. For 1935 the range was similar except that synchromesh was added to all forward gears and this Minx became the first mass-produced car with an all-synchromesh gearbox.[4] it was designed by Rootes' technical director Captain John Samuel Irving (1880-1953), designer of Sunbeam aero engines and Sunbeam's Golden Arrow' in conjunction with Alfred Herbert Wilde (1891–1930), recently chief engineer of Standard and designer of the Standard Nine.[3]

The 1936 model had a new name, the Minx Magnificent, and a restyle with a much more rounded body. The chassis was stiffened and the engine moved forwards to give more passenger room. The rear panel, previously vertical, was now set at a sloping angle, and the manufacturers offered the option of a folding luggage grid attached to the rear panel for "two pounds, seven shillings and sixpence" (slightly under £2.40) painted.[5] A Commer-badged estate car was added to the range.

The final pre-war model was the 1938 Minx. There were no more factory-built tourers but some were made by Carbodies. The car was visually similar to the Magnificent, with a different grille, and access to the luggage boot (trunk) was external (that on the predecessor was accessed by folding down the rear seat). There were two saloon models in the range, the basic "Safety" model with simple rexine trim instead of leather, no opening front quarter lights, and less luxurious trim levels. The De Luxe model had leather trim, opening quarter lights, extra trim pads, and various other comfort benefits. The 1938 model was not the final iteration before the outbreak of war, however, as the 1939 model was considerably different mechanically, with virtually the entire drivetrain improved to the extent that few parts are interchangeable with the 1938 model. This includes gearbox, differential, half shafts, steering box, and a great many other mechanical and cosmetic changes. Even the front grille, which to the casual eye looks almost identical to the 1938 model, became a pressed alloy component rather than a composite.

  • Aerominx 1933
    Aerominx 1933
  • Minx sports tourer 1934
    Minx sports tourer 1934
  • Minx 1935 the first mass-produced car with an all-synchromesh gearbox[4]
    Minx 1935 the first mass-produced car with an all-synchromesh gearbox[4]
  • Minx 1937
    Minx 1937
  • Minx tourer 1937
    Minx tourer 1937
RAF staff car

Wartime Minx

During the Second World War, British car companies produced simple Utility load carriers, the Car, Light Utility or "Tilly" which was later developed into the experimental Hillman Gnat. For Hillman it was the Hillman 10HP, a Minx chassis with a two-person cab and covered load area behind. The basic saloon was also produced for military and essential civilian use from 1940 to 1944.

Operators

  •  
    RAF

Minx Mark I to VIII (1945–57)

Hillman Minx Mark I to VIII
I4
  • 1,265 cc I4
  • 1,390 cc I4
  • The Minx sold between 1945 and 1947 had the same 1185 cc side-valve engine, the same wheelbase and virtually the same shape as the prewar Minx. This postwar Minx became known as the Minx Mark I (or Minx Phase I). This was the first Minx with a protruding boot (trunk) that nodded to the

    three-box design
    by then replacing the 'flat back' look, inherited from models that had debuted in the 1930s. Between 1947 and 1948, Hillman offered a modified version they called the Minx Mark II.

    A much more modern-looking Minx, the Mark III, was sold from 1948. Three different body styles were offered initially, these being saloon, estate car and drophead coupé (convertible). Beneath the metal, however, and apart from updated front suspension, little had changed: the Mark III retained the 1185 cc side-valve engine of its predecessor. Claimed power output, at 35 bhp (26.1 kW), was also unchanged. However, in 1949 the old engine was bored out and compression ratio increased, for the Minx Mark IV, to 1265 cc, and power output increased by 7 per cent to 37.5 bhp (28.0 kW).

    The Motor magazine in 1949 had a top speed of 67 mph (108 km/h) and could accelerate from 0–60 mph (97 km/h) in 39.7 seconds. A fuel consumption of 32.1 miles per imperial gallon (8.8 L/100 km; 26.7 mpg‑US) was recorded. The test car cost £505 including taxes, the price including radio (£36), over-riders (£5) and heater (£18).[11]

    The Mark V, introduced in 1951, featured side chromium trim and a floor-mounted handbrake.[12]

    The Mark VI of 1953 featured a new grille, revised combustion chambers and a two-spoke steering wheel.

    b-pillar that wound down out of sight along with the rear side window to give an unbroken window line when all windows were fully opened: the rear window assembly was of a three-piece wrap-around form.[13] The wheelbase and overall length of the car remained the same as those of the four-door saloon and convertible permutations. The Mark VII, also introduced in 1953, featured longer rear mudguards and a bigger boot.[12] For the Mark VIII, in 1954, a new ohv
    1390 cc engine was installed. This engine, two years later, went into the first of the new "Audax series" Minxes.

    For a short time in the early 1950s, Hillman Minxes were sold in the US to Americans seeking better gas mileage. American reviews of the vehicle were lukewarm.[14]

    The Mark VI to Mark VIII was produced in Japan by Isuzu Motors between 1953 and 1956, as the Isuzu Hillman Minx,[15][16] prior to their 1961 introduction of the Bellel.[8]

    A 2-door coupé utility variant of the Minx Mark VIII was produced by Rootes Australia as the Hillman de luxe Utility, circa 1956.[10]

    • 1946 Hillman Minx Mark I saloon
      1946 Hillman Minx Mark I saloon
    • 1947 Hillman Minx Mark I drophead coupé
      1947 Hillman Minx Mark I drophead coupé
    • 1948 Hillman Minx Mark II Saloon
      1948 Hillman Minx Mark II Saloon
    • Hillman Minx Mark III Saloon
      Hillman Minx Mark III Saloon
    • Hillman Minx Mark IV Saloon (1949)
      Hillman Minx Mark IV Saloon (1949)
    • 1953 Hillman Minx Mark V
      1953 Hillman Minx Mark V
    • 1953 Hillman Minx Mark VI
      1953 Hillman Minx Mark VI
    • 1954 Hillman Minx Mark VII
      1954 Hillman Minx Mark VII
    • Hillman Minx Mark VIII drophead coupé ca 1955
      Hillman Minx Mark VIII drophead coupé ca 1955
    • Hillman Minx Mark VIII 4-door saloon 1955
      Hillman Minx Mark VIII
      4-door saloon 1955
    • Hillman Minx Californian Mark VIII
      Hillman Minx Californian Mark VIII
    • Hillman de luxe Utility Mark VIII
      Hillman de luxe Utility Mark VIII
    • 1954 Humber 10 (Minx rebranded for New Zealand's Humber dealers)
      1954 Humber 10 (Minx rebranded for New Zealand's Humber dealers)
    • 1955 Humber 80 (Minx rebranded for New Zealand market)
      1955 Humber 80 (Minx rebranded for New Zealand market)

    Audax design Hillman Minx (Series I to Series VI, 1956–67)

    Hillman Minx Series I to Series VI
    I4

    1,494 cc I4
    1,592 cc I4
    1,725 cc I4
    Chronology
    SuccessorHillman New Minx

    The Audax body was designed by the Rootes Group, but helped by the

    Borg Warner. The Series VI was fitted with an all-synchromesh gearbox.[23]

    A Series III deLuxe saloon with 1494 cc engine tested by the British magazine The Motor in 1958 had a top speed of 76.9 mph (123.8 km/h) and could accelerate from 0–60 mph (97 km/h) in 25.4 seconds. A fuel consumption of 31.8 miles per imperial gallon (8.9 L/100 km; 26.5 mpg‑US) was recorded. The test car cost £794 including taxes of £265.[24]

    There were Singer Gazelle and Sunbeam Rapier variants of all these Hillman Minx models and the names were again used on derivatives in the later Rootes Arrow range. Some models were re-badged in certain markets, with the Sunbeam and Humber marques used for some exports.

    The New Zealand importer/assembler Todd Motors created the Humber 80 and Humber 90, badge-engineered models based respectively on the Minx and Super Minx, to give Humber dealers a smaller car to sell alongside the locally assembled Hawk and Super Snipe. Although the 90 was identical to the Super Minx apart from badging, the cheaper 80 featured a horizontal bar grille design. The Humber 80 was acknowledged in the 1980s Roger Hall play Prisoners of Mother England, in which a newly arrived immigrant in New Zealand spots one and exclaims: "Humber 80? There's no such car!"

    In Australia, a Series Va model was released in 1965.[25] It was fitted with a more powerful 1592cc engine and the all-synchromesh gearbox destined for the forthcoming Series VI model.[25]

    The Audax Minx was also built in Japan by Isuzu Motors as the Isuzu Hillman Minx, under licence from Rootes, between September 1956 and June 1964.[16] Isuzu produced their own unique estate car version, the Isuzu Hillman Express, from 1958 to 1964.[26]

    • Hillman Minx Series I Saloon
      Hillman Minx Series I Saloon
    • Hillman Minx Series II Saloon
      Hillman Minx Series II Saloon
    • Hillman Minx Series III Saloon
      Hillman Minx Series III Saloon
    • Hillman Minx Series III Saloon in side view
      Hillman Minx Series III Saloon in side view
    • Hillman Minx Series IIIA Saloon - chrome grille
      Hillman Minx Series IIIA Saloon - chrome grille
    • Hillman Minx Series IIIB Convertible featuring an alloy grille in place of the chrome grill of the Series IIIA
      Hillman Minx Series IIIB Convertible featuring an alloy grille in place of the chrome grill of the Series IIIA
    • Hillman Minx Series IIIC Convertible: the last of the convertible Minx line
      Hillman Minx Series IIIC Convertible: the last of the convertible Minx line
    • Hillman Minx Series V: Roof and rear window restyled, 13-inch wheels, disc brakes, 1592cc engine
      Hillman Minx Series V: Roof and rear window restyled, 13-inch wheels, disc brakes, 1592cc engine
    • Hillman Minx Series VI: Bumper over-riders deleted, 1725cc engine
      Hillman Minx Series VI: Bumper over-riders deleted, 1725cc engine
    • 1959 Humber 80 – a Hillman Minx Series III badged as Humber for some markets such as (here) in New Zealand
      1959 Humber 80 – a Hillman Minx Series III badged as Humber for some markets such as (here) in New Zealand
    • 1966 Sunbeam Minx in Canada
      1966 Sunbeam Minx in Canada

    Super Minx (1961–67)

    Hillman Super Minx
    Hillman Super Minx Mark IV Saloon

    Launched late in 1961, the Hillman Super Minx was intended at one stage to replace the Minx Series III.[27] In the event the Series III would be replaced in 1963 by the Series V, while the Super Minx was launched as a separate, albeit closely related, model.

    New Minx (1967–70)

    Hillman New Minx
    Hillman Hunter

    A replacement Minx (sometimes identified, retrospectively, as the New Minx) took over from the Series VI in 1967. It was a reduced specification version of the

    Hillman Hunter.[29] Saloon and estate versions were produced, initially equipped with a 54 bhp 1496 cc 4 cylinder engine.[29] A 61 bhp 1725cc engine became available in 1968.[30] The final Minx was replaced by a Hillman Hunter De Luxe model in 1970.[30]

    • 1968 Hillman Minx estate
      1968 Hillman Minx estate
    • 1967 Hillman Minx saloon rear
      1967 Hillman Minx saloon rear
    • Estate rear
      Estate rear

    Models

    Type Year Engine Approx. production Body types Wheelbase[31] Max speed Notes
    Minx 1932–33 1185 cc 4-cylinder side-valve n/a tourer, sports tourer, 4 light saloon, 6 light saloon, drophead coupé 92 in (2,337 mm) 62 mph (100 km/h) 3-speed gearbox, Bendix brakes, wire wheels
    Minx 1934 1185 cc 4-cylinder side-valve n/a tourer, sports tourer, 4 light saloon, 6 light saloon, drophead coupé 92 in (2,337 mm) 62 mph (100 km/h) 4-speed gearbox
    Minx 1935 1185 cc 4-cylinder side-valve n/a tourer, sports tourer, 4 light saloon, 6 light saloon, drophead coupé 92 in (2,337 mm) 62 mph (100 km/h) Synchromesh gearbox
    Minx Magnificent 1936–37 1185 cc 4-cylinder side-valve n/a tourer, sports tourer, saloon, drophead coupé, estate (1937) 93 in (2,362 mm) 62 mph (100 km/h) New chassis with the engine moved forwards; pressed steel wheels
    New Minx 1938–39 1185 cc 4-cylinder side-valve n/a saloon, drophead coupé, estate 93 in (2,362 mm) 62 mph (100 km/h) Styling update
    Minx 1940–44 1185 cc 4-cylinder side-valve n/a saloon, drophead coupé 93 in (2,362 mm) 62 mph (100 km/h) Unitary construction, 12-volt, rear-hinged bonnet, probably no coupés made
    Car, Light Utility, Hillman 10HP 1940–45 4 cyl. 30 bhp (22 kW) engine 1185 cc sv Utility body (also Saloon, "Convertible Van" "Ladder Van") 151 in (3,835 mm) Six Marks, pickup bodies with integral cab
    Minx Mark I 1945–47 1185 cc 4-cylinder side-valve 60,000 (estimated including Mark II)[32] saloon, drophead coupé, estate 93 in (2,362 mm) 63 mph (101 km/h) Unitary construction, 12-volt, rear-hinged bonnet
    Minx Mark II 1947–48 1185 cc 4-cylinder side-valve see Mark I saloon, drophead coupé, estate 93 in (2,362 mm) 66 mph (106 km/h) Styling update: faired in headlamps, hydraulic brakes
    Minx Mark III 1948–49 1185 cc 4-cylinder side-valve 28,619[32] saloon, convertible, estate 93 in (2,362 mm) 70 mph (110 km/h) New styling, independent front suspension
    Minx Mark IV 1949–51 1265 cc 4-cylinder side-valve 90,832[32] saloon, convertible, estate, pickup/utility 93 in (2,362 mm) 68 mph (109 km/h) Styling as Mark III
    Minx Mark V 1951–53 1265 cc 4-cylinder side-valve 59,777[32] saloon, convertible, estate 93 in (2,362 mm) 73 mph (117 km/h) Minor changes
    Minx Mark VI 1953 1265 cc 4-cylinder side-valve 44,643[32] saloon, convertible, 'California' coupé, estate 93 in (2,362 mm) 70 mph (110 km/h) New grille
    Minx Mark VII 1953–54 1265 cc 4-cylinder side-valve 60,711[32] saloon, convertible, coupé, estate 93 in (2,362 mm) 69 mph (111 km/h) Bigger boot
    Minx Mark VIII 1954–57 1390 cc 4-cylinder overhead-valve 94,123[32] saloon, convertible, coupé, estate, pickup/coupé utility [33] 93 in (2,362 mm) 74 mph (119 km/h) 15-inch wheels; early examples have previous engine
    Minx Series I 1956–57 1390 cc 4-cylinder overhead-valve 202,204[32] saloon, convertible, estate 96 in (2,438 mm) 78 mph (126 km/h) New body designed by Raymond Loewy, reminiscent of his 1955 Studebaker
    Minx Series II 1957–58 1390 cc 4-cylinder overhead-valve saloon, convertible, estate 96 in (2,438 mm) 78 mph (126 km/h) Minor styling change
    Minx Series III 1958–59 1494 cc 4-cylinder overhead-valve 83,105[32] saloon, convertible, estate 96 in (2,438 mm) 77 mph (124 km/h) New grille
    Minx Series IIIA, B 1959–60, 60–61 1494 cc 4-cylinder overhead-valve 78,052
    and 58,260[32]
    saloon, convertible, estate 96 in (2,438 mm) 80 mph (130 km/h) Tail fins; optional auto; hypoid rear axle on IIIB
    Minx Series IIIC 1961–63 1592 cc 4-cylinder overhead-valve n/a saloon, convertible, estate 96 in (2,438 mm) 78 mph (126 km/h) No convertibles after mid 1962
    Super Minx Series I 1961–62 1592 cc 4-cylinder overhead-valve n/a saloon, convertible, estate 101 in (2,565 mm) 82 mph (132 km/h) Long wheelbase Minx
    Minx Series V 1963–65 1592 cc 4-cylinder overhead-valve n/a saloon 96 in (2,438 mm) 77 mph (124 km/h) Front discs
    Super Minx Series II 1962–63 1592 cc 4-cylinder overhead-valve n/a saloon, convertible, estate 101 in (2,565 mm) 82 mph (132 km/h) Front discs
    Super Minx Series III 1964–65 1592 cc 4-cylinder overhead-valve n/a saloon 101 in (2,565 mm) 81 mph (130 km/h) All synchromesh gearbox revised "C" post
    Minx Series VI 1965–67 1725 cc 4-cylinder overhead-valve n/a saloon 96 in (2,438 mm) 82 mph (132 km/h) All synchromesh gearbox
    Super Minx Series IV 1964–65 1725 cc 4-cylinder overhead-valve n/a saloon 101 in (2,565 mm) 82 mph (132 km/h)
    Hunter 1966–79 1725 cc 4-cylinder overhead-valve 470,000[32] saloon, estate 98 in (2,489 mm) 90 mph (140 km/h) "Arrow" series shape, optional overdrive
    New Minx 1967–70 1496 cc 4-cylinder overhead-valve saloon, estate 98 in (2,489 mm) 83 mph (134 km/h) Basic "Arrow" Hunter; 1725 cc engine optional on estates

    Scale Models

    Explanatory notes

    1. ^ Instead of being bolted firmly to the chassis the engine was mounted so that it could rock from side to side restricted by a leaf spring.

    References

    1. ^ Commer Mark IV Retrieved from www.sa.hillman.org.au on 31 July 2012
    2. ^ Cars Of 1932. The Times, Thursday, Oct 1, 1931; p. 7; Issue 45942
    3. ^ .
    4. ^ .
    5. .
    6. ^ "Hillman Estate CAR Sales Brochure 1956 2247 EX 1 46 20 | eBay". 25 April 2015. Archived from the original on 25 April 2015.
    7. ^ 1950 Humber 10, The 27th British Car Day, www.leylandp76club.org.nz Retrieved 1 August 2015
    8. ^ a b c Murkin, Andy. "Isuzu Hillman Minxes". Andy's Hillman Homepage. Retrieved 28 August 2012.
    9. ^ Gavin Farmer, Great Ideas In Motion, 2010, page 266
    10. ^ a b Advertisement for Hillman de luxe Utility, Rootes (Australia) Limited, Power Farming in Australia and New Zealand, August 1956, page 100
    11. ^
      The Motor
      . 1949.
    12. ^ a b c Michael Sedgwick & Markes Gillies, A-Z of Cars 1945–1970, page 87
    13. .
    14. ^ "Report on the Hillman Minx" Popular Mechanics, January 1953, pp. 112-115/260
    15. ^ "The History of Anglo-Japanese relations, 1600–2000" Edited by Janet E. Hunter and Shinya Sugiyama: Volume IV, Chapter 6 – A case study of Anglo-Japanese cooperation in the motor vehicle industry: Ishikawajima, Wolseley, Isuzu and Rootes
    16. ^ a b "Isuzu Memorial 1953 -2003", Yaesu Publishing (Japan) 2008
    17. ^ Sunbeam Minx Retrieved from www.sunbeam.org.au on 6 August 2012
    18. ^
      ISSN 0263-3183
      .
    19. ^ Rootes (Australia) Limited advertisement for Hillman Minx, Modern Motor magazine, July 1957
    20. ^ New Hillman Minx. The Times, Thursday, May 17, 1956; pg. 2; Issue 53533
    21. ^ Michael Sedgwick & Markes Gillies, A-Z of Cars 1945–1970, pages 88 & 89
    22. ^ "Easidrive".
    23. ^ Hillman Minx Series VI, www.motorbase.com Retrieved 24 October 2017
    24. The Motor
      . 1 October 1958.
    25. ^ a b Hillman Minx Series V & VI and Hillman Gazelle, www.sa.hillman.org.au Retrieved 24 October 2017
    26. ^ Isuzu Hillman Minx factory brochures from 1959,1960,1962
    27. ^ Bowler, Michael (27 January 1968). "Moderation in all things. The philosophy of the Hillman Minx". Motor: Rootes owners' supplement 25–29.
    28. ^ French market Sunbeam Minx brochure cover Retrieved from www.flickr.com on 6 August 2012
    29. ^ a b Michael Sedgwick & Markes Gillies, A-Z of Cars 1945–1970, page 90
    30. ^ a b Smart new clothes Archived 19 August 2012 at the Wayback Machine Retrieved from www.rootes-chrysler.co.uk on 31 July 2012
    31. .
    32. ^ .
    33. ^ Hillman & Commer Mark VIII Light Pick-up (utility) Retrieved from www.sa.hillman.org.au on 31 July 2012
    34. .
    35. .

    External links