Homoaromaticity
Homoaromaticity, in
The concept of homoaromaticity was pioneered by Saul Winstein in 1959, prompted by his studies of the “tris-homocyclopropenyl” cation.[2] Since the publication of Winstein's paper, much research has been devoted to understanding and classifying these molecules, which represent an additional class of aromatic molecules included under the continuously broadening definition of aromaticity. To date, homoaromatic compounds are known to exist as cationic and anionic species, and some studies support the existence of neutral homoaromatic molecules, though these are less common.[3] The 'homotropylium' cation (C8H9+) is perhaps the best studied example of a homoaromatic compound.
Overview
Naming
The term "homoaromaticity" derives from the structural similarity between homoaromatic compounds and the analogous
History
The concept of homoaromaticity has its origins in the debate over the
In a series of acetolysis experiments, Winstein et al. observed that the
Winstein subsequently observed that this non-classical model of the 3-bicyclo[3.1.0]hexyl cation is analogous to the previously well-studied aromatic
2- units
Evidence for homoaromaticity
Criterion for homoaromaticity
The criterion for
- molecular structure (i.e. coplanarity: all contributing atoms in the same plane)
- molecular energetics (i.e. increased thermodynamic stability)
- spectroscopic and magnetic properties (i.e. magnetic field induced ring current)
A number of exceptions to these conventional rules exist, however. Many molecules, including
Consequently, the criterion for homoaromatic delocalization remains similarly ambiguous and somewhat controversial. The homotropylium cation, (C8H9+), though not the first example of a homoaromatic compound ever discovered, has proven to be the most studied of the compounds classified as homoaromatic, and is therefore often considered the classic example of homoaromaticity. By the mid-1980s, there were more than 40 reported substituted derivatives of the homotropylium cation, reflecting the importance of this ion in formulating our understanding of homoaromatic compounds.[6]
Early evidence for homoaromaticity
After initial reports of a "homoaromatic" structure for the tris-homocyclopropenyl cation were published by Winstein, many groups began to report observations of similar compounds. One of the best studied of these molecules is the homotropylium cation, the parent compound of which was first isolated as a stable salt by Pettit, et al. in 1962, when the group reacted cyclooctatraene with strong acids.[8] Much of the early evidence for homoaromaticity comes from observations of unusual NMR properties associated with this molecule.
NMR spectroscopy studies
While characterizing the compound resulting from deprotonation of
From this observation, Pettit, et al. concluded that the classical structure of the cyclooctatrienyl cation must be incorrect. Instead, the group proposed the structure of the bicyclo[5.1.0]octadienyl compound, theorizing that the cyclopropane bond located on the interior of the eight-membered ring must be subject to considerable delocalization, thus explaining the dramatic difference in observed chemical shift. Upon further consideration, Pettit was inclined to represent the compound as the "homotropylium ion," which shows the "internal cyclopropane" bond totally replaced by electron delocalization. This structure shows how delocalization is cyclic and involves 6 π electrons, consistent with Huckel's rule for aromaticity. The magnetic field of the NMR could thus induce a ring current in the ion, responsible for the significant differences in resonance between the exo and endo protons of this methylene bridge. Pettit, et al. thus emphasized the remarkable similarity between this compound and the aromatic tropylium ion, describing a new "homo-counterpart" to an aromatic species already known, precisely as predicted by Winstein.
Subsequent NMR studies undertaken by Winstein and others sought to evaluate the properties of metal carbonyl complexes with the homotropylium ion. Comparison between a molybdenum-complex and an iron-complex proved particularly fruitful.
UV spectroscopy studies
An important piece of early evidence in support of the homotropylium cation structure that did not rely on the magnetic properties of the molecule involved the acquisition of its
More recent evidence for homoaromaticity
More recently, work has been done to investigate the structure of the purportedly homoaromatic homotropylium ion by employing various other experimental techniques and theoretical calculations. One key experimental study involved analysis of a substituted homotropylium ion by X-ray crystallography. These crystallographic studies have been used to demonstrate that the internuclear distance between the atoms at the base of the cyclopropenyl structure is indeed longer than would be expected for a normal cyclopropane molecule, while the external bonds appear to be shorter, indicating involvement of the internal cyclopropane bond in charge delocalization.[6]
Molecular orbital description
The molecular orbital explanation of the stability of homoaromaticity has been widely discussed with numerous diverse theories, mostly focused on the homotropenylium cation as a reference. R.C. Haddon initially proposed a
Perturbation molecular orbital theory
Homoaromaticity can better be explained using Perturbation Molecular Orbital Theory (PMO) as described in a 1975 study by Robert C. Haddon. The homotropenylium cation can be considered as a perturbed version of the tropenylium cation due to the addition of a homoconjugate linkage interfering with the resonance of the original cation.[12]
First-order effects
The most important factor in influencing homoaromatic character is the addition of a single homoconjugate linkage into the parent aromatic compound. The location of the homoconjugate bond is not important as all homoaromatic species can be derived from aromatic compounds that possess symmetry and equal bond order between all carbons. The insertion of a homoconjugate linkage perturbs the π-electron density an amount δβ, which depending on the ring size, must be greater than 0 and less than 1, where 0 represents no perturbation and 1 represents total loss of aromaticity (destabilization equivalent to the open chain form).[12] It is believed that with increasing ring size, the resonance stabilization of homoaromaticity is offset by the strain in forming the homoconjugate bridge. In fact, the maximum ring size for homoaromaticity is fairly low as a 16-membered annulene ring favours the formation of the aromatic dication over the strained bridged homocation.[13]
Second-order effects
Second homoconjugate linkage
A significant second-order effect on the Perturbation Molecular Orbital model of homoaromaticity is the addition of a second homoconjugate linkage and its influence on stability. The effect is often a doubling of the instability brought about by the addition of a single homoconjugate linkage, although there is an additional term that depends on the proximity of the two linkages. In order to minimize δβ and thus keep the coupling term to a minimum, bishomoaromatic compounds form depending on the conformation of greatest stability by resonance and smallest steric hindrance. The synthesis of the 1,3-bishomotropenylium cation by protonating cis-bicyclo[6.1.0]nona-2,4,6-triene agrees with theoretical calculations and maximizes stability by forming the two methylene bridges at the 1st and 3rd carbons.[12]
Substituents
The addition of a substituent to a homoaromatic compound has a large influence over the stability of the compound. Depending on the relative locations of the substituent and the homoconjugate linkage, the substituent can either have a stabilizing or destabilizing effect. This interaction is best demonstrated by looking at a substituted tropenylium cation. If an inductively electron-donating group is attached to the cation at the 1st or 3rd carbon position, it has a stabilizing effect, improving the homoaromatic character of the compound. However, if this same substituent is attached at the 2nd or 4th carbon, the interaction between the substituent at the homoconjugate bridge has a destabilizing effect. Therefore, protonation of methyl or phenyl substituted cyclooctatetraenes will result in the 1 isomer of the homotropenylium cation.[12]
Examples of homoaromatic compounds
Following the discovery of the first homoaromatic compounds, research has gone into synthesizing new homoaromatic compounds that possess similar stability to their aromatic parent compounds. There are several classes of homoaromatic compounds, each of which have been predicted theoretically and proven experimentally.
Cationic homoaromatics
The most established and well-known homoaromatic species are cationic homoaromatic compounds. As stated earlier, the homotropenylium cation is one of the most studied homoaromatic compounds. Many homoaromatic cationic compounds use as a basis a cyclopropenyl cation, a tropylium cation, or a cyclobutadiene dication as these compounds exhibit strong aromatic character.[14]
In addition to the homotropylium cation, another well established cationic homoaromatic compound is the norbornen-7-yl cation, which has been shown to be strongly homoaromatic, proven both theoretically and experimentally.[15]
An intriguing case of
Reduction of the corresponding six electrons dianions was not possible so far.
Neutral homoaromatics
There are many classes of neutral homoaromatic compounds although there is much debate as to whether they truly exhibit homoaromatic character or not.
One class of neutral homoaromatics are called monohomoaromatics, one of which is cycloheptatriene, and numerous complex monohomoaromatics have been synthesized. One particular example is a 60-carbon fulleroid derivative that has a single methylene bridge. UV and NMR analysis have shown that the aromatic character of this modified fulleroid is not disrupted by the addition of a homoconjugate linkage, therefore this compound is definitively homoaromatic.[18]
Substituted neutral
The homoannulenes also act as photoswitches by which means a local 6π homoaromaticity can be switched to a global 10π homoaromaticity.Bishomoaromatics
It was long considered that the best examples of neutral homoaromatics are bishomoaromatics such as barrelene and semibullvalene. First synthesized in 1966,[21] semibullvalene has a structure that should lend itself well to homoaromaticity although there has been much debate whether semibullvalene derivatives can provide a true delocalized, ground state neutral homoaromatic compound or not. In an effort to further stabilize the delocalized transition structure by substituting semibullvalene with electron donating and accepting groups, it has been found that the activation barrier to this rearrangement can be lowered, but not eliminated.[22][23] However, with the introduction of ring strain into the molecule, aimed at destabilizing the localized ground state structure's through the strategic addition of cyclic annulations, a delocalized homoaromatic ground-state structure can indeed be achieved.[24]
Of the neutral homoaromatics, the compounds best believed to exhibit neutral homoaromaticity are boron containing compounds of 1,2-diboretane and its derivatives. Substituted diboretanes are shown to have a much greater stabilization in the delocalized state over the localized one, giving strong indications of homoaromaticity.[25] When electron-donating groups are attached to the two boron atoms, the compound favors a classical model with localized bonds. Homoaromatic character is best seen when electron-withdrawing groups are bonded to the boron atoms, causing the compound to adopt a nonclassical, delocalized structure.
Trishomoaromatics
As the name suggests, trishomoaromatics are defined as containing one additional methylene bridge compared to bishomoaromatics, therefore containing three of these homoconjugate bridges in total. Just like semibullvalene, there is still much debate as to the extent of the homoaromatic character of trishomoaromatics. While theoretically they are homoaromatic, these compounds show a stabilization of no more than 5% of benzene due to delocalization.[26]
Anionic homoaromatics
Unlike neutral homoaromatic compounds, anionic homoaromatics are widely accepted to exhibit "true" homoaromaticity. These anionic compounds are often prepared from their neutral parent compounds through lithium metal reduction. 1,2-diboretanide derivatives show strong homoaromatic character through their three-atom (boron, boron, carbon), two-electron bond, which contains shorter C-B bonds than in the neutral classical analogue.[27] These 1,2-diboretanides can be expanded to larger ring sizes with different substituents and all contain some degree of homoaromaticity.
Anionic homoaromaticity can also be seen in dianionic bis-diazene compounds, which contain a four-atom (four nitrogens), six-electron center. Experiment results have shown the shortening of the transannular nitrogen-nitrogen distance, therefore demonstrating that dianionic bis-diazene is a type of anionic bishomoaromatic compound. Peculiar feature of these systems is that the cyclic electron delocalization is taking place in the σ-plane defined by the four nitrogens. These bis-diazene-dianions are therefore the first examples for 4-center-6-electron
Antihomoaromaticity
There are also reports of antihomoaromatic compounds. Just as
Similarly, a substituted bicyclo[3.2.1]octa-3,6-dien-2-yl cation (the 2-(4'-Fluorophenyl) bicyclo[3.2.1]oct-3,6-dien-2-yl cation) was also shown to be an antiaromate when compared to its corresponding allyl cation, corroborated by theoretical calculations as well as by NMR analysis.[30]
External links
- Homoaromaticity on the Gold Book
References
- ^ .
- PMID 15760178.
- .
- ISBN 0-8247-6210-X
- ^ .
- PMID 11749368.
- .
- .
- .
- .
- ^ .
- .
- S2CID 93688550.
- ISBN 978-0-387-68346-1
- .
- S2CID 96232491.
- .
- PMID 36702883.
- ISSN 0039-7881.
- .
- .
- .
- PMID 21735493.
- .
- .
- .
- .
- .
- ^ PMID 16526766.