Ideal gas law
Thermodynamics |
---|
The ideal gas law, also called the general gas equation, is the
Equation
The
Common forms
The most frequently introduced forms are:
- is the absolute pressure of the gas,
- is the volume of the gas,
- is the amount of substance of gas (also known as number of moles),
- is the ideal, or universal, gas constant, equal to the product of the Boltzmann constant and the Avogadro constant,
- is the Boltzmann constant,
- is the Avogadro constant,
- is the absolute temperature of the gas,
- is the number of particles (usually atoms or molecules) of the gas.
In
Molar form
How much gas is present could be specified by giving the mass instead of the chemical amount of gas. Therefore, an alternative form of the ideal gas law may be useful. The chemical amount, n (in moles), is equal to total mass of the gas (m) (in kilograms) divided by the molar mass, M (in kilograms per mole):
By replacing n with m/M and subsequently introducing density ρ = m/V, we get:
Defining the specific gas constant Rspecific as the ratio R/M,
This form of the ideal gas law is very useful because it links pressure, density, and temperature in a unique formula independent of the quantity of the considered gas. Alternatively, the law may be written in terms of the specific volume v, the reciprocal of density, as
It is common, especially in engineering and meteorological applications, to represent the specific gas constant by the symbol R. In such cases, the universal gas constant is usually given a different symbol such as or to distinguish it. In any case, the context and/or units of the gas constant should make it clear as to whether the universal or specific gas constant is being used.[5]
Statistical mechanics
In statistical mechanics, the following molecular equation is derived from first principles
where P is the absolute
where NA is the Avogadro constant.
From this we notice that for a gas of mass m, with an average particle mass of μ times the
) the number of molecules will be given byand since ρ = m/V = nμmu, we find that the ideal gas law can be rewritten as
In SI units, P is measured in
Combined gas law
Combining the laws of Charles, Boyle and Gay-Lussac gives the combined gas law, which takes the same functional form as the ideal gas law says that the number of moles is unspecified, and the ratio of to is simply taken as a constant:[6]
where is the pressure of the gas, is the volume of the gas, is the absolute temperature of the gas, and is a constant. When comparing the same substance under two different sets of conditions, the law can be written as
Energy associated with a gas
According to the assumptions of the kinetic theory of ideal gases, one can consider that there are no intermolecular attractions between the molecules, or atoms, of an ideal gas. In other words, its potential energy is zero. Hence, all the energy possessed by the gas is the kinetic energy of the molecules, or atoms, of the gas.
This corresponds to the kinetic energy of n moles of a
Energy of a monoatomic gas | Mathematical expression |
---|---|
Energy associated with one mole | |
Energy associated with one gram | |
Energy associated with one atom |
Applications to thermodynamic processes
The table below essentially simplifies the ideal gas equation for a particular processes, thus making this equation easier to solve using numerical methods.
A thermodynamic process is defined as a system that moves from state 1 to state 2, where the state number is denoted by subscript. As shown in the first column of the table, basic thermodynamic processes are defined such that one of the gas properties (P, V, T, S, or H) is constant throughout the process.
For a given thermodynamics process, in order to specify the extent of a particular process, one of the properties ratios (which are listed under the column labeled "known ratio") must be specified (either directly or indirectly). Also, the property for which the ratio is known must be distinct from the property held constant in the previous column (otherwise the ratio would be unity, and not enough information would be available to simplify the gas law equation).
In the final three columns, the properties (p, V, or T) at state 2 can be calculated from the properties at state 1 using the equations listed.
Process | Constant | Known ratio or delta | p2 | V2 | T2 |
---|---|---|---|---|---|
Isobaric process | Pressure | V2/V1 | p2 = p1 | V2 = V1(V2/V1) | T2 = T1(V2/V1) |
T2/T1 | p2 = p1 | V2 = V1(T2/T1) | T2 = T1(T2/T1) | ||
Isochoric process (Isovolumetric process) (Isometric process) |
Volume | p2/p1 | p2 = p1(p2/p1) | V2 = V1 | T2 = T1(p2/p1) |
T2/T1 | p2 = p1(T2/T1) | V2 = V1 | T2 = T1(T2/T1) | ||
Isothermal process | Temperature | p2/p1 | p2 = p1(p2/p1) | V2 = V1(p1/p2) | T2 = T1 |
V2/V1 | p2 = p1(V1/V2) | V2 = V1(V2/V1) | T2 = T1 | ||
Isentropic process (Reversible adiabatic process) |
p2/p1 | p2 = p1(p2/p1) | V2 = V1(p2/p1)(−1/γ) | T2 = T1(p2/p1)(γ − 1)/γ | |
V2/V1 | p2 = p1(V2/V1)−γ | V2 = V1(V2/V1) | T2 = T1(V2/V1)(1 − γ) | ||
T2/T1 | p2 = p1(T2/T1)γ/(γ − 1) | V2 = V1(T2/T1)1/(1 − γ) | T2 = T1(T2/T1) | ||
Polytropic process | P Vn | p2/p1 | p2 = p1(p2/p1) | V2 = V1(p2/p1)(−1/n) | T2 = T1(p2/p1)(n − 1)/n |
V2/V1 | p2 = p1(V2/V1)−n | V2 = V1(V2/V1) | T2 = T1(V2/V1)(1 − n) | ||
T2/T1 | p2 = p1(T2/T1)n/(n − 1) | V2 = V1(T2/T1)1/(1 − n) | T2 = T1(T2/T1) | ||
Isenthalpic process (Irreversible adiabatic process) |
p2 − p1 | p2 = p1 + (p2 − p1) | T2 = T1 + μJT(p2 − p1) | ||
T2 − T1 | p2 = p1 + (T2 − T1)/μJT | T2 = T1 + (T2 − T1) |
^ a. In an isentropic process, system entropy (S) is constant. Under these conditions, p1V1γ = p2V2γ, where γ is defined as the heat capacity ratio, which is constant for a calorifically perfect gas. The value used for γ is typically 1.4 for diatomic gases like nitrogen (N2) and oxygen (O2), (and air, which is 99% diatomic). Also γ is typically 1.6 for mono atomic gases like the noble gases helium (He), and argon (Ar). In internal combustion engines γ varies between 1.35 and 1.15, depending on constitution gases and temperature.
Deviations from ideal behavior of real gases
The equation of state given here (PV = nRT) applies only to an ideal gas, or as an approximation to a real gas that behaves sufficiently like an ideal gas. There are in fact many different forms of the equation of state. Since the ideal gas law neglects both
Derivations
Empirical
The empirical laws that led to the derivation of the ideal gas law were discovered with experiments that changed only 2 state variables of the gas and kept every other one constant.
All the possible gas laws that could have been discovered with this kind of setup are:
- Boyle's law (Equation 1)
- Charles's law (Equation 2)
- Avogadro's law (Equation 3)
- Gay-Lussac's law (Equation 4)
- Equation 5
- Equation 6
where P stands for pressure, V for volume, N for number of particles in the gas and T for temperature; where are constants in this context because of each equation requiring only the parameters explicitly noted in them changing.
To derive the ideal gas law one does not need to know all 6 formulas, one can just know 3 and with those derive the rest or just one more to be able to get the ideal gas law, which needs 4.
Since each formula only holds when only the state variables involved in said formula change while the others (which are a property of the gas but are not explicitly noted in said formula) remain constant, we cannot simply use algebra and directly combine them all. This is why: Boyle did his experiments while keeping N and T constant and this must be taken into account (in this same way, every experiment kept some parameter as constant and this must be taken into account for the derivation).
Keeping this in mind, to carry the derivation on correctly, one must imagine the gas being altered by one process at a time (as it was done in the experiments). The derivation using 4 formulas can look like this:
at first the gas has parameters
Say, starting to change only pressure and volume, according to Boyle's law (Equation 1), then:
|
(7) |
After this process, the gas has parameters
Using then equation (5) to change the number of particles in the gas and the temperature,
|
(8) |
After this process, the gas has parameters
Using then equation (6) to change the pressure and the number of particles,
|
(9) |
After this process, the gas has parameters
Using then Charles's law (equation 2) to change the volume and temperature of the gas,
|
(10) |
After this process, the gas has parameters
Using simple algebra on equations (7), (8), (9) and (10) yields the result:
Another equivalent result, using the fact that , where n is the number of moles in the gas and R is the universal gas constant, is:
If three of the six equations are known, it may be possible to derive the remaining three using the same method. However, because each formula has two variables, this is possible only for certain groups of three. For example, if you were to have equations (1), (2) and (4) you would not be able to get any more because combining any two of them will only give you the third. However, if you had equations (1), (2) and (3) you would be able to get all six equations because combining (1) and (2) will yield (4), then (1) and (3) will yield (6), then (4) and (6) will yield (5), as well as would the combination of (2) and (3) as is explained in the following visual relation:
where the numbers represent the gas laws numbered above.
If you were to use the same method used above on 2 of the 3 laws on the vertices of one triangle that has a "O" inside it, you would get the third.
For example:
Change only pressure and volume first:
|
(1') |
then only volume and temperature:
|
(2') |
then as we can choose any value for , if we set , equation (2') becomes:
|
(3') |
combining equations (1') and (3') yields , which is equation (4), of which we had no prior knowledge until this derivation.
Theoretical
Kinetic theory
The ideal gas law can also be derived from
First we show that the fundamental assumptions of the kinetic theory of gases imply that
Consider a container in the Cartesian coordinate system. For simplicity, we assume that a third of the molecules moves parallel to the -axis, a third moves parallel to the -axis and a third moves parallel to the -axis. Next we temporarily assume that all molecules with the same velocity . We choose an area on a wall of the container, perpendicular to the -axis. When time elapses, all molecules in the volume moving in the positive direction of the -axis will hit the area. There are molecules in a part of volume of the container, but only one sixth (i.e. a half of a third) of them moves in the positive direction of the -axis. Therefore, the number of molecules that will hit the area when the time elapses is .
When a molecule bounces off the wall of the container, it changes its momentum to . Hence the magnitude of change of the momentum of one molecule is . The magnitude of the change of momentum of all molecules that bounce off the area when time elapses is then . From and we get
We supposed that all molecules move with the same velocity , but in fact they move with different velocities, so we replace in the equation by the arithmetic mean of all squares of all velocities of the molecules, i.e. by Therefore
which gives the desired formula.
Using the Maxwell–Boltzmann distribution, the fraction of molecules that have a speed in the range to is , where
and denotes the Boltzmann constant. The root-mean-square speed can be calculated by
Using the integration formula
it follows that
from which we get the ideal gas law:
Statistical mechanics
Let q = (qx, qy, qz) and p = (px, py, pz) denote the position vector and momentum vector of a particle of an ideal gas, respectively. Let F denote the net force on that particle. Then (two times) the time-averaged kinetic energy of the particle is:
where the first equality is
By
where dS is the infinitesimal area element along the walls of the container. Since the divergence of the position vector q is
the divergence theorem implies that
where dV is an infinitesimal volume within the container and V is the total volume of the container.
Putting these equalities together yields
which immediately implies the ideal gas law for N particles:
where n = N/NA is the number of moles of gas and R = NAkB is the gas constant.
Other dimensions
For a d-dimensional system, the ideal gas pressure is:[8]
where is the volume of the d-dimensional domain in which the gas exists. The dimensions of the pressure changes with dimensionality.
See also
- Boltzmann constant – Physical constant relating particle kinetic energy with temperature
- Configuration integral – Function in thermodynamics and statistical physics
- Dynamic pressure – Kinetic energy per unit volume of a fluid
- Gas laws
- Internal energy – Energy contained within a system
- Van der Waals equation – Gas equation of state which accounts for non-ideal gas behavior
References
- ^
Clapeyron, E. (1835). "Mémoire sur la puissance motrice de la chaleur". Journal de l'École Polytechnique (in French). XIV: 153–90. Facsimile at the Bibliothèque nationale de France (pp. 153–90).
- ^ .
- ^ .
- ^ "Equation of State". Archived from the original on 2014-08-23. Retrieved 2010-08-29.
- ISBN 0-471-31713-6.
- ISBN 9780470504765. Retrieved 29 January 2019.
- PMID 16576959.
- Bibcode:2011arXiv1106.1273N.
Further reading
- Davis; Masten (2002). Principles of Environmental Engineering and Science. New York: McGraw-Hill. ISBN 0-07-235053-9.
External links
- "Website giving credit to Benoît Paul Émile Clapeyron, (1799–1864) in 1834". Archived from the original on July 5, 2007.
- Configuration integral (statistical mechanics) where an alternative statistical mechanics derivation of the ideal-gas law, using the relationship between the Helmholtz free energy and the partition function, but without using the equipartition theorem, is provided. Vu-Quoc, L., Configuration integral (statistical mechanics), 2008. this wiki site is down; see this article in the web archive on 2012 April 28.
- Gas equations in detail