Anatomical terms of muscle
This article is part of a series on |
Anatomical terminology |
---|
Anatomical terminology is used to uniquely describe aspects of skeletal muscle, cardiac muscle, and smooth muscle such as their actions, structure, size, and location.
Types
There are three types of
Skeletal muscle
Skeletal muscle, or "voluntary muscle", is a striated muscle tissue that primarily joins to bone with tendons. Skeletal muscle enables movement of bones, and maintains posture.[1] The widest part of a muscle that pulls on the tendons is known as the belly.
Muscle slip
A muscle slip is a slip of muscle that can either be an
Smooth muscle
Cardiac muscle
Cardiac muscle is specific to the heart. It is also involuntary in its movement, and is additionally self-excitatory, contracting without outside stimuli.[4]
Actions of skeletal muscle
As well as anatomical terms of motion, which describe the motion made by a muscle, unique terminology is used to describe the action of a set of muscles.
Agonists and antagonists
Agonist muscles and antagonist muscles are muscles that cause or inhibit a movement.[5]
Agonist muscles are also called prime movers since they produce most of the force, and control of an action.
Another example is the dumb-bell curl at the elbow. The elbow flexor group is the agonist, shortening during the lifting phase (elbow flexion). During the lowering phase the elbow flexor muscles lengthen, remaining the agonists because they are controlling the load and the movement (elbow extension). For both the lifting and lowering phase, the "elbow extensor" muscles are the antagonists (see below). They lengthen during the dumbbell lifting phase and shorten during the dumbbell lowering phase. Here it is important to understand that it is common practice to give a name to a muscle group (e.g. elbow flexors) based on the joint action they produce during a shortening contraction. However, this naming convention does not mean they are only agonists during shortening. This term typically describes the function of skeletal muscles.[8]
Antagonist muscles are simply the muscles that produce an opposing joint torque to the agonist muscles.[9] This torque can aid in controlling a motion. The opposing torque can slow movement down - especially in the case of a ballistic movement. For example, during a very rapid (ballistic) discrete movement of the elbow, such as throwing a dart, the triceps muscles will be activated very briefly and strongly (in a "burst") to rapidly accelerate the extension movement at the elbow, followed almost immediately by a "burst" of activation to the elbow flexor muscles that decelerates the elbow movement to arrive at a quick stop. To use an automotive analogy, this would be similar to pressing the accelerator pedal rapidly and then immediately pressing the brake. Antagonism is not an intrinsic property of a particular muscle or muscle group; it is a role that a muscle plays depending on which muscle is currently the agonist. During slower joint actions that involve gravity, just as with the agonist muscle, the antagonist muscle can shorten and lengthen. Using the example of the triceps brachii during a push-up, the elbow flexor muscles are the antagonists at the elbow during both the up phase and down phase of the movement. During the dumbbell curl, the elbow extensors are the antagonists for both the lifting and lowering phases.[10]
Antagonistic pairs
Antagonist and agonist muscles often occur in pairs, called antagonistic pairs. As one muscle contracts, the other
However, muscles do not always work this way; sometimes agonists and antagonists contract at the same time to produce force, as per Lombard's paradox. Also, sometimes during a joint action controlled by an agonist muscle, the antagonist will be slightly activated, naturally. This occurs normally and is not considered to be a problem unless it is excessive or uncontrolled and disturbs the control of the joint action. This is called agonist/antagonist co-activation and serves to mechanically stiffen the joint.
Not all muscles are paired in this way. An example of an exception is the deltoid.[11]
Synergists
Synergist muscles also called fixators, act around a joint to help the action of an
Muscle fibers can only contract up to 40% of their fully stretched length. [citation needed] Thus the short fibers of pennate muscles are more suitable where power rather than range of contraction is required. This limitation in the range of contraction affects all muscles, and those that act over several joints may be unable to shorten sufficiently to produce the full range of movement at all of them simultaneously (active insufficiency, e.g., the fingers cannot be fully flexed when the wrist is also flexed). Likewise, the opposing muscles may be unable to stretch sufficiently to allow such movement to take place (passive insufficiency). For both these reasons, it is often essential to use other synergists, in this type of action to fix certain of the joints so that others can be moved effectively, e.g., fixation of the wrist during full flexion of the fingers in clenching the fist. Synergists are muscles that facilitate the fixation action.
There is an important difference between a helping synergist muscle and a true synergist muscle. A true synergist muscle is one that only neutralizes an undesired joint action, whereas a helping synergist is one that neutralizes an undesired action but also assists with the desired action. [citation needed]
Neutralizer action
A muscle that fixes or holds a bone so that the agonist can carry out the intended movement is said to have a neutralizing action. A good famous example of this are the
Composite muscle
Composite or hybrid muscles have more than one set of fibers that perform the same function, and are usually supplied by different nerves for different set of fibers. For example, the tongue itself is a composite muscle made up of various components like longitudinal, transverse, horizontal muscles with different parts innervated having different nerve supply.
Muscle naming
There are a number of terms used in the naming of muscles including those relating to size, shape, action, location, their orientation, and their number of heads.
- By size
- brevis means short; longus means long; major means large; maximus means largest; minor means small, and minimus smallest. These terms are often used after the particular muscle such as gluteus maximus, and gluteus minimus.[13]
- By shape
- deltoid means triangular; quadratus means having four sides; rhomboideus means having a rectus abdominis.[13]
- By action
- external rotatorrotating away from the body.
Form
Insertion and origin
The insertion and origin of a muscle are the two places where it is anchored, one at each end. The connective tissue of the attachment is called an enthesis.
Origin
The origin of a muscle is the
The head of a muscle, also called caput musculi is the part at the end of a muscle at its origin, where it attaches to a fixed bone. Some muscles such as the biceps have more than one head.
Insertion
The insertion of a muscle is the structure that it attaches to and tends to be moved by the contraction of the muscle. [15] This may be a bone, a tendon or the subcutaneous dermal connective tissue. Insertions are usually connections of muscle via tendon to bone.[16] The insertion is a bone that tends to be distal, have less mass, and greater motion than the origin during a contraction.
Intrinsic and extrinsic muscles
Intrinsic muscles have their origin in the part of the body that they act on, and are contained within that part.[17] Extrinsic muscles have their origin outside of the part of the body that they act on.[18] Examples are the intrinsic and extrinsic muscles of the tongue, and those of the hand.
Muscle fibers
Muscles may also be described by the direction that the muscle fibers run, in their muscle architecture.
- Fusiform muscles have fibers that run parallel to the length of the muscle, and are spindle-shaped.[19] For example, the pronator teres muscle of the forearm.
- quill pen. For example, the fibularis muscles.
- Bipennate muscles consist of two rows of oblique muscle fibres, facing in opposite diagonal directions, converging on a central tendon. Bipennate muscle is stronger than both unipennate muscle and fusiform muscle, due to a larger physiological cross-sectional area. Bipennate muscle shortens less than unipennate muscle but develops greater tension when it does, translated into greater power but less range of motion. Pennate muscles generally also tire easily. Examples of bipennate muscles are the rectus femoris muscle of the thigh, and the stapedius muscle of the middle ear.
State
Hypertrophy and atrophy
Hypertrophy is increase in muscle size from an increase in size of individual muscle cells. This usually occurs as a result of exercise.
See also
References
This article incorporates text in the public domain from the 20th edition of Gray's Anatomy (1918)
- ^ Skeletal Muscle
- S2CID 3456242. Retrieved 13 May 2021.
- ^ Smooth Muscle
- ^ Cardiac Muscle
- ^ "Interactions of skeletal muscles their fascicle arrangement and their lever-systems". Archived from the original on 23 March 2022. Retrieved 10 May 2021.
- ISBN 9780071222075.
- ^ Taber 2001, pp. "Agonist".
- ISBN 978-0-7360-8465-9.
- ^ Taber 2001, pp. "Antagonist".
- PMID 21250237, retrieved 2024-02-19
- ^ Purves, D; Augustine, GJ (2001). "Neural Circuits". NCBI. Sinauer Association.
- ^ "9.6C: How Skeletal Muscles Produce Movements". Medicine LibreTexts. 19 July 2018. Retrieved 8 May 2021.
- ^ ISBN 9780071222075.
- ^ OED 1989, "origin".
- ^ Taber 2001, "insertion".
- ISBN 0130172928.
- ^ "Definition of INTRINSIC". www.merriam-webster.com. Retrieved 7 May 2021.
- ^ "Definition of EXTRINSIC". www.merriam-webster.com. Retrieved 7 May 2021.
- ^ Taber 2001, "Fusiform".
- Books
- Taber, Clarence Wilbur; Thomas, Clayton L.; Venes, Donald (2001). Taber's cyclopedic medical dictionary (Ed. 19, illustrated in full color ed.). Philadelphia: F.A.Davis Co. ISSN 1065-1357.
- J. A. Simpson, ed. (1989). The Oxford English dictionary. Oxford: Clarendon Press. ISBN 9780198611868.