Retired from British Railways in 1963 after covering 2.08 million miles, Flying Scotsman has been described as the world's most famous steam locomotive. It had earned considerable fame in preservation under the ownership of, successively, Alan Pegler, William McAlpine, Tony Marchington, and, since 2004, the National Railway Museum. 4472 became a flagship locomotive for the LNER, representing the company twice at the British Empire Exhibition and in 1928, hauled the inaugural non-stop Flying Scotsman service. It set two world records for steam traction, becoming the first locomotive to reach the officially authenticated speed of 100 miles per hour (161 km/h) on 30 November 1934,[1] and setting the longest non-stop run of a steam locomotive of 422 miles (679 km) on 8 August 1989 while on tour in Australia.
Flying Scotsman being prepared for the 1924 British Empire Exhibition
Flying Scotsman became a flagship locomotive for the LNER, representing the company at the
water trough system several times en route. Flying Scotsman ran with its corridor tender until October 1936, after which it reverted to the original type. From 1938 until its withdrawal in 1963, it was paired with a streamlined non-corridor tender.[7]
corridor tender
On 30 November 1934, Flying Scotsman became the
first steam locomotive to reach the officially authenticated speed of 100 mph (161 km/h),[8][9] while hauling a light test train between Leeds and London, and the publicity-conscious LNER made much of the fact.[10] Although the Great Western Railway's 3440 City of Truro
was reported to have reached the same speed in 1904, the record was unreliable.
Following the success of Gresley's streamlined Class A4s introduced in 1935, Flying Scotsman was relegated to lesser duties but still worked on the main line and hauling passenger services.[11] In 1943, as with all railway stock during World War II, the locomotive was painted black.[12] In 1946, it was renumbered twice by Gresley's successor Edward Thompson, who devised a comprehensive renumbering scheme for the LNER. 4472 was initially assigned number 502, but an amendment to the system several months later led to its renumbering of 103.[13]
In 1928, Gresley began to modify the A1s into an improved version, the
psi boiler was replaced with a 225 psi version with the long "banjo" dome of the type it carries today, and it was fitted with more efficient valves and cylinders.[15]
In 1945, the remaining unmodified A1s, which did not include Flying Scotsman, were reclassified as A10.
60103 returned to the East Coast Main Line in 1953, initially based in
smoke deflectors fitted at the end of 1961.[19][20][21]
Amid rumours that British Railways would scrap Flying Scotsman, the Gresley A3 Preservation Society failed to raise the £3,000 to buy it. Businessman and railway enthusiast Alan Pegler stepped in, having seen the locomotive as a boy at the British Empire Exhibition and received £70,000 in 1961 for his shareholding in the Northern Rubber Company when it was sold to Pegler's Valves, a company started by his grandfather.[22][23] Pegler bought the locomotive for £3,500 (equal to £77,971 today) with the political support of Prime Minister Harold Wilson.[24][25][26] On 14 January 1963 Jack Peckston of Copley Hill drove the Flying Scotsman for its final service with British Railways, hauling the 13:15 from London King's Cross to Leeds with the locomotive coming off at Doncaster.[27] The event attracted considerable media interest.[28][29] The Flying Scotsman had covered over 2.08 million miles in three weeks short of 40 years in operation.[8][30][31]
Preservation
Alan Pegler (1963–1972)
Flying Scotsman ready for its US tour in 1969
Pegler immediately restored Flying Scotsman at Doncaster Works as closely as possible to its LNER condition: it was renumbered 4472 and repainted in LNER Apple Green; the smoke deflectors were removed; the double chimney replaced by a single; and its standard tender was replaced with a corridor type. Pegler's contract with British Railways allowed him to run Flying Scotsman on the network until 31 December 1971;[32] for a time, it was the only steam locomotive running on the British mainline.[25] Its first public run was on 10 April 1963 with a round trip from London Paddington to Ruabon, Wales, where over 8,000 people came out to see the locomotive at Birmingham.[33] In the following year, Pegler had the engine stand on the Forth Bridge for several days while it was sketched for a portrait by Terence Cuneo.[34] On 13 November 1965, Flying Scotsman claimed the fastest steam hauled run between Paddington and Cardiff at 2 hours and 17 minutes, and set the fastest run for the return leg.[35] By the end of 1965, Flying Scotsman had recouped the £3,000 it cost Pegler to buy it.[36]
As watering facilities for steam locomotives were disappearing, in September 1966 Pegler spent £1,000 on a second corridor tender which, for an additional £6,000, was adapted as an auxiliary water tank and coupled behind the first tender.[37][38] With a total water capacity of around 11,000 gallons, this gave Flying Scotsman an operational range of over 200 miles.[32] The boiler and cylinder parts from Flying Scotsman's scrapped sister engine, 60041 Salmon Trout were also purchased.[39][40] On 1 May 1968, the locomotive completed a non-stop London to Edinburgh run, marking the 40th anniversary of the inaugural non-stop Flying Scotsman service and the year steam traction officially ended on British Railways.[41] A non-stop return journey was made three days later.[42]
Following an overhaul on the locomotive in the winter of 1968–69, Wilson's government agreed to support Pegler running Flying Scotsman in the United States and Canada, hauling a 9-coach exhibition train to promote British exports. To comply with local railway regulations, it was fitted with a
Atlanta, Georgia via New York City and Washington, D.C., and on to Slaton, Texas, where it paused for the winter.[44][23] Despite a successful start, the tour ran into problems as strict anti-steam laws in some states deemed the engine a fire hazard, and either denied permission to run or required the train to be towed by a diesel or electric locomotive. Restrictions on foreign trains meant Pegler was not allowed to carry paying passengers, and had to pay local railways to run on their lines.[45] The tour resumed in 1970 with a run from Texas to Green Bay, Wisconsin and across the Canadian border into Montreal; this was followed by a run from Toronto to San Francisco via the Rocky Mountains and Oregon in 1971, a total of 15,400 miles (24,800 km).[22]
In 1972, Flying Scotsman earned money running passenger trips on the San Francisco Belt Railroad and was put on show at Fisherman's Wharf.[46] Despite a hopeful start, complaints from businesses along the route ended the trips, and the train had to relocate to a less accessible yard, causing a 90% reduction of income.[47] Pegler, now £132,000 in debt with considerable unpaid bills, declared himself bankrupt and in August, arranged for the engine to be kept in storage at the US Army's Sharpe Depot in Lathrop, California to keep it from unpaid creditors, who by now were demanding payments and threatening legal action.[22][47] Pegler worked his passage home on a P&O cruise ship, which led to a seven-year career as a cruise entertainer giving lectures about trains and travel and enabled him to discharge himself from bankruptcy.[48]
William McAlpine (1973–1995)
Flying Scotsman at Carnforth MPD in 1982 with original single chimney and without the smoke deflectors
Amid fears of the engine's future, horticulturist and steam enthusiast
Alan Bloom asked businessman William McAlpine to help save it. McAlpine agreed and within a few days dealt with the attorneys, paid the outstanding debts owed to the local American and Canadian railways, and bought the locomotive for $72,000 (around £25,000).[49]Flying Scotsman was shipped back to England via the Panama Canal, which cost McAlpine another $35,000.[50] Upon arrival at Liverpool in February 1973, the engine travelled to Derby under its own steam with the route lined with crowds. McAlpine paid for its restoration at Derby Works
and two subsequent overhauls in the 23 years that he owned and ran it.
Flying Scotsman in 1994, wearing its British Railways livery and numbering, equipped with double chimney and smoke deflectors
Other highlights included Flying Scotsman
broad gauge Victorian Railways R class locomotives, and parallel runs alongside South Australian Railways locomotives 520 and 621. Its visit to Perth saw a reunion with GWR 4079 Pendennis Castle, which had been exhibited alongside Flying Scotsman at the 1924 British Empire Exhibition.[56] On 8 August 1989, Flying Scotsman set another record en route to Alice Springs from Melbourne, travelling 679 kilometres (422 mi) from Parkes to Broken Hill non-stop, the longest such run by a steam locomotive ever recorded.[57] The same journey also saw Flying Scotsman set its own haulage record when it took a 735-ton train over the 790-kilometre (490 mi) leg between Tarcoola and Alice Springs.[58]
Upon returning to Britain, Flying Scotsman returned to its former British Railways condition with its number changed to 60103, refitting of the smoke deflectors and double chimney, and repainted in BR Brunswick Green.[59] It retired from the mainline in 1992 following the expiration of its running certificate.[60] In 1993, McAlpine sold it to help pay off a mortgage on the locomotive. Music producer and railway enthusiast Pete Waterman became involved and the two formed Flying Scotsman Railways, with Waterman running the business side of the partnership.[61]
In April 1995, Flying Scotsman derailed during an empty stock movement on the Llangollen Railway, with all wheels coming off the track. When put back into steam, smoke emerged from a crack separating the boiler and the front cab. It was deemed a total failure and immediately withdrawn from service.[62] It returned to Southall awaiting its next major overhaul.
Tony Marchington (1996–2004)
By 1996, McAlpine and Waterman had run into financial issues and to help pay off an overdraft, put Flying Scotsman on sale. On 23 February, entrepreneur Tony Marchington, already well known in the steam preservation movement, bought the locomotive, a set of Pullman coaches, and the Southall depot for £1.5 million.[63] He spent a further £1 million on the locomotive's subsequent overhaul to mainline running condition, which lasted three years and at that point, the most extensive in its history.[64] It received an upgraded 250 psi boiler originally made for a Class A4; its vacuum brakes replaced with an air type; its livery repainted in LNER Apple Green; the smoke deflectors removed; the double chimney restored; and renumbered 4472.[65] Marchington's time with the Flying Scotsman was the subject of the 2000 Channel 4 documentary A Steamy Affair: The Story of Flying Scotsman.[66]
Flying Scotsman's first run following the works was on 4 July 1999, hauling The Inaugural Scotsman from London King's Cross to York, where an estimated one million people turned out to see it.
Venice-Simplon Orient Express Pullman trains between 2001 and 2004, but financial issues quickly became apparent and Flying Scotsman Services failed to effectively market or price the runs, in addition to the locomotive failing several times.[69][70]
In 2002, Marchington proposed a business plan which included the construction of a Flying Scotsman Village in Edinburgh, to create revenue from associated branding. After floating on
Barclays Bank, stated that the company only had enough cash to trade until April 2004. Later the company's shares were suspended after it had failed to declare interim results.[71]
National Railway Museum (2004–present)
At Railfest 2004At Leamington Spa in October 2005, shortly before its 10-year restoration
In February 2004, a debt agency acting on behalf of Flying Scotsman plc announced it would hold a sealed bid auction for the locomotive, to be held on 2 April.
Mark 1 support coach.[72] The locomotive arrived in York in time to be exhibited as part of the museum's Railfest in June 2004 to celebrate 200 years of rail travel.[74]
In 2004 and 2005, Flying Scotsman intermittently hauled special trains across Great Britain, although problems with its condition soon became apparent. It failed on the delivery trip to Railfest and several times more in the following months, but the museum's engineering staff failed to spot critical faults. From September 2004 until May 2005, it sat at the NRM's workshop for a heavy intermediate repair, the intention being to improve reliability and allow operation until its general overhaul and restoration. However, by the end of 2005 the intermediate repairs failed to improve the situation and the NRM decided to proceed with the general overhaul.[72]
2006–2016 restoration
The frames and wheelset in the NRM workshops in 2009
The locomotive entered the NRM's workshops in January 2006, with the original intention to return it to Gresley's original specification and renew its boiler certificate. It was estimated that this would take one year to complete, and cost around £750,000.[72][75] The works were on view for visitors at the NRM, but the engine was rapidly dismantled to such an extent that the running plate was the only component recognisable to the casual observer.
In July 2007, the museum pushed back the expected completion date by 18 months, due in part to issues with the boiler restoration.[72] By 2009, with further problems encountered including misaligned frames and a cracked cylinder, plus rising metal prices, the museum launched the SOS ("Save Our Scotsman") appeal, seeking to raise a further £250,000 with the aim of completing the work by the end of the year.[76] In May 2011, Flying Scotsman was unveiled on the museum's turntable, finished in wartime black LNER livery; after final tests, it was to be painted LNER Apple Green and have it running excursions by the summer.[77] However, cracks were discovered in the horn blocks and further testing revealed more cracks throughout the frame assembly, leading to the replacement of the main stretcher bar, horn ties and middle cylinder motion bracket, all of which were deemed beyond repair.[72]
At the NRM's workshops in 2012
In 2012, the NRM published a report examining the reasons for the delay and additional cost. It found that the museum had greatly underestimated the work required due to the locomotive's poor condition, much of which was missed by a rushed inspection which produced an overly optimistic assessment. It also found that management lacked the experience, continuity or resources to undertake such a complex task. Problems were also caused by the conflicting objectives of producing a certified mainline locomotive while retaining as many original components and assemblies as possible, and between the need to overhaul the locomotive and use it as a marketing tool for the museum.[72]
Following the report, First Class Partnerships (FCP) were commissioned to independently review the remaining necessary work. By March 2013, FCP had determined Flying Scotsman would not return to the mainline until 2015, and suggested the outstanding work be put out to external tender.[78] Riley & Son was announced as the winning contractor, and on the same day the locomotive was moved to their workshop in Bury.[79] In July 2015, it was estimated to have Flying Scotsman in service by early 2016 with electronic equipment required to operate on the mainline.[80] The final cost of the restoration amounted to £4.2 million, having risen by a £300,000 estimate in the summer of 2015 in order to finish the necessary additional work before the deadline.[81]
Return to service
Flying Scotsman on display at the NRM in 2016, after its overhaul
On 7 January 2016, Flying Scotsman moved under its own steam for the first time since 2005 on the East Lancashire Railway, where it completed several low speed tests.[82] Its inaugural mainline run was on 6 February with The Winter Cumbrian Mountain Express from Carnforth to Carlisle, still wearing its 2011 wartime black livery with 60103 on the smokebox and its LNER wartime numbers, 103 and 502, on the cab sides.[83][84] After it was restored to match its appearance in 1963, Flying Scotsman returned to London King's Cross on 25 February, with a run to York.[85] Thousands of people lined the route, and the train was forced to stop due to members of the public trespassing on the line near St Neots.[86]
In October 2018, six years after Pegler's death, it hauled the Farewell Alan Pegler special from King's Cross to York, organised at the request of his daughter. In his will, Pegler requested for half of his ashes to be placed in the firebox of the locomotive as it ascended Stoke Bank. The climb was accompanied by a long blast of the whistle as passengers onboard gave a moment of silence.[87] In January 2019, Flying Scotsman hauled the non-stop Scotsman's Salute from King's Cross to York, this time as a tribute to McAlpine following his death in March 2018.[88]
In April 2022, the engine was withdrawn for an overhaul in preparation for its centenary year in 2023.[89] Following the work it will be certified to run on the mainline until 2029, after which it will run solely on heritage railways until 2032.[90] It appeared at London King's Cross as a static display for two days to commemorate the 170th anniversary of the station's opening on 14 and 15 October 2022.[91][92]
In January 2024, the museum prepared to solicit bids for a custodian to operate and maintain Flying Scotsman, expecting to pick one in late spring. With a new contract in place, the engine would resume touring in autumn 2024.[93][94]
Centenary events
The all-female crew in 2023
In celebration of turning 100 in February 2023, Flying Scotsman will take part in various events between March and December including static displays, runs on the mainline, and visits to heritage railways. A special 100 Years, 100 Voices exhibition will be held at the National Railway Museum.
Queen Elizabeth II.[97] Poet Laureate Simon Armitage released a new poem entitled The Making of Flying Scotsman.[98][99] On International Women's Day, Flying Scotsman was operated by an all-female crew for the second time in its history.[100]
On 29 September, Flying Scotsman was involved in a low speed collision as it was reversing to couple onto the Belmond Royal Scotsman at Aviemore ahead of its run on the Strathspey Heritage Railway. Several people were treated for injuries, with 2 people being taken to hospital.[101][102]
In popular culture
Film and television
Because of the LNER's emphasis on using the locomotive for publicity purposes, and then its eventful preservation history, including two international forays, it is one of the UK's most recognised locomotives. One of its first film appearances was in the 1929 film The Flying Scotsman, which featured an entire sequence set aboard the locomotive.[103]Flying Scotsman is seen in Agatha (1979), disguised as two other members of the class–4474 Victor Wild on one side and 4480 Enterprise on the other.[104]Flying Scotsman makes a short appearance in 102 Dalmatians (2000). It was filmed leaving London St Pancras, which was the final steam-hauled departure from the station prior to its reconstruction as the new Eurostar terminal.[105]
In 1985, Flying Scotsman appeared alongside an InterCity 125 in a British Rail television advert.[106] The locomotive was the first choice for the Top Gear Race to the North in 2009, but was unable to attend due to its overhaul. So LNER Class A1 60163 Tornado was used instead.[107] In 2011, a Tri-ang Hornby model of Flying Scotsman appeared in two episodes of James May's Toy Stories. It was James May's personal childhood model and was chosen by him to complete a world record for the longest model railway.[108] The train was meant to travel seven miles, from Barnstaple to Bideford in North Devon, but it failed early in the trip. It completed the run on a subsequent attempt.[109] The model reappeared in James May: The Reassembler, in which it was completely disassembled and then put back together by May as a demonstration.
In 2016, Flying Scotsman was the subject of two television documentaries. Flying Scotsman from the Footplate aired on BBC 4,[110] and Flying Scotsman with Robson Green was broadcast on ITV. The latter features Green who spent a year with the team of engineers commissioned to restore the locomotive.[111]
The Railway Series and Thomas & Friends
Flying Scotsman is featured in
Gordon. Its two tenders were a key feature of the plot of "Tenders for Henry". When the story was filmed for the television series Thomas & Friends, renamed as "Tender Engines", only Flying Scotsman's two tenders were seen outside a shed.[112]Flying Scotsman was intended to have a larger role in this episode, but due to budgetary constraints the entire model could not be constructed.[113]
Flying Scotsman makes a full appearance in the animated film Thomas & Friends: The Great Race (2016),[114] where he is voiced by Rufus Jones in both the UK and US dubs. Beyond the movie, he would also appear as a recurring character.
Other
Flying Scotsman is featured on Flying Scotsman and Other Steam Locomotives in Action, an LP of
field recordings of various steam locomotives in action released by President Records in 1972.[115]
Flying Scotsman is a playable locomotive in the 2001 PC simulation game
Train Sim World 4.[117] The locomotive is also featured in the 2018 racing game Forza Horizon 4, in a Showcase event in which the player must race against the engine.[118]
Hornby Railways used Flying Scotsman as its Centenary Year edition logo. Hornby marketed two versions of Flying Scotsman in N scale British locomotives made by Minitrix for several years from 1977 as ‘Hornby Minitrix’. When the agreement ended Minitrix continued for a while to make and sell British locos and 2 versions of Flying Scotsman were the last listed in catalogues.[119] It was sold first as 60103 in BR green and crest, then later as 4472 in LNER green and lettering.
^Tony Wheeler (director); Gene Carr (cameraman); BBC (production company) (1968). 40th anniversary run documentary. YouTube. Archived from the original on 7 April 2021. Retrieved 7 April 2020.
^Batchelder, Alf (June 2013). "Memories of the Flying Scotsman in 1988: Farewell". Branchline. Castlemaine and Maldon Railway Preservation Society. p. 7.
Boddy, M. G.; Neve, E.; Yeadon, W. B. (1986). Fry, E. V. (ed.). Locomotives of the L.N.E.R., Part 2A: Tender Engines—Classes A1 to A10. Kenilworth: RCTS.
Hardy, Richard (2013). The Flying Scotsman Pocket-Book. Bloomsbury Publishing PLC.
