Magnetic anomaly

In

1. The
   fluxgate magnetometer was developed during World War II to detect submarines.^{[3]: 75 [4]} It measures the component along a particular axis of the sensor, so it needs to be oriented. On land, it is often oriented vertically, while in aircraft, ships and satellites it is usually oriented so the axis is in the direction of the field. It measures the magnetic field continuously, but drifts over time. One way to correct for drift is to take repeated measurements at the same place during the survey.^{[2]: 163–165 [3]}
   ^: 75–77
2. The
   proton precession magnetometer measures the strength of the field but not its direction, so it does not need to be oriented. Each measurement takes a second or more. It is used in most ground surveys except for boreholes and high-resolution gradiometer surveys.^{[2]: 163–165 [3]}
   ^: 77–78
3. Optically pumped magnetometers, which use alkali gases (most commonly rubidium and caesium) have high sample rates and sensitivities of 0.001 nT or less, but are more expensive than the other types of magnetometers. They are used on satellites and in most aeromagnetic surveys.^{[3]: 78–79}

Data acquisition

Ground-based

In ground-based surveys, measurements are made at a series of stations, typically 15 to 60 m apart. Usually a proton precession magnetometer is used and it is often mounted on a pole. Raising the magnetometer reduces the influence of small ferrous objects that were discarded by humans. To further reduce unwanted signals, the surveyors do not carry metallic objects such as keys, knives or compasses, and objects such as motor vehicles, railway lines, and barbed wire fences are avoided. If some such contaminant is overlooked, it may show up as a sharp spike in the anomaly, so such features are treated with suspicion. The main application for ground-based surveys is the detailed search for minerals.^{[2]: 163 [3]: 83–84}

Aeromagnetic

Airborne magnetic surveys are often used in oil surveys to provide preliminary information for seismic surveys. In some countries such as Canada, government agencies have made systematic surveys of large areas. The survey generally involves making a series of parallel runs at a constant height and with intervals of anywhere from a hundred meters to several kilometers. These are crossed by occasional tie lines, perpendicular to the main survey, to check for errors. The plane is a source of magnetism, so sensors are either mounted on a boom (as in the figure) or towed behind on a cable. Aeromagnetic surveys have a lower spatial resolution than ground surveys, but this can be an advantage for a regional survey of deeper rocks.^{[2]: 166 [3]: 81–83}

Shipborne

In shipborne surveys, a magnetometer is towed a few hundred meters behind a ship in a device called a fish. The sensor is kept at a constant depth of about 15 m. Otherwise, the procedure is similar to that used in aeromagnetic surveys.^{[2]: 167 [3]: 83}

Spacecraft

Second, since the anomaly is the local contribution to the magnetic field, the main geomagnetic field must be subtracted from it. The International Geomagnetic Reference Field is usually used for this purpose. This is a large-scale, time-averaged mathematical model of the Earth's field based on measurements from satellites, magnetic observatories and other surveys.^[2]: 167

Some corrections that are needed for gravity anomalies are less important for magnetic anomalies. For example, the vertical gradient of the magnetic field is 0.03 nT/m or less, so an elevation correction is generally not needed.^[2]: 167

Interpretation

Theoretical background

Magnetic susceptibilities of common rocks and minerals^[3]: 74

Type	Susceptibility (${\displaystyle \times 10^{-3}}$ SI)
Sedimentary
Limestones	0-3
Sandstones	0-20
Shales	0.01-15
Igneous
Basalt	0.2-175
Gabbro	1-90
Granite	0-50
Rhyolite	0.2-35
Metamorphic
Gneiss	0.1-25
Serpentine	3-17
Slate	0-35
Minerals
Graphite	0.1
Quartz	-0.01
Coal	0.02
Clays	0.2
Pyrrhotite	1-6000
Magnetite	1200-19200

The magnetization in the surveyed rock is the vector sum of induced and remanent magnetization:

${\displaystyle \mathbf {M} =\mathbf {M} _{\text{i}}+\mathbf {M} _{\text{r}}.}$

The induced magnetization of many minerals is the product of the ambient magnetic field and their magnetic susceptibility χ:

${\displaystyle \mathbf {M} _{\text{i}}=\chi \mathbf {H} .}$

Some susceptibilities are given in the table.

Minerals that are diamagnetic or paramagnetic only have an induced magnetization. Ferromagnetic minerals such as magnetite also can carry a remanent magnetization or remanence. This remanence can last for millions of years, so it may be in a completely different direction from the present Earth's field. If a remanence is present, it is difficult to separate from the induced magnetization unless samples of the rock are measured. The ratio of the magnitudes, Q = M_r/M_i, is called the Koenigsberger ratio.^{[2]: 172–173 [13]}

Magnetic anomaly modeling

Interpretation of magnetic anomalies is usually done by matching observed and modeled values of the anomalous magnetic field. An algorithm developed by Talwani and Heirtzler(1964) (and further elaborated by Kravchinsky et al., 2019) treats both induced and remnant magnetizations as vectors and allows theoretical estimation of the remnant magnetization from the existing apparent polar wander paths for different tectonic units or continents.^[14][15]

Applications

Ocean floor stripes

Magnetic surveys over the oceans have revealed a characteristic pattern of anomalies around mid-ocean ridges. They involve a series of positive and negative anomalies in the intensity of the magnetic field, forming stripes running parallel to each ridge. They are often symmetric about the axis of the ridge. The stripes are generally tens of kilometers wide, and the anomalies are a few hundred nanoteslas. The source of these anomalies is primarily permanent magnetization carried by titanomagnetite minerals in

In the Space Odyssey series by Arthur C. Clarke, a series of monoliths are left by extraterrestrials for humans to find. One near the crater Tycho is found by its unnaturally powerful magnetic field and named Tycho Magnetic Anomaly 1 (TMA-1).^[18] One orbiting Jupiter is named TMA-2, and one in the Olduvai Gorge is found in 2513 and retroactively named TMA-0 because it was first encountered by primitive humans.

See also

References