Photographic fixer

Photographic fixer is a mix of chemicals used in the final step in the photographic processing of film or paper. The fixer stabilises the image, removing the unexposed silver halide remaining on the photographic film or photographic paper, leaving behind the reduced metallic silver that forms the image. By fixation, the film or paper is insensitive to further action by light. Without fixing, the remaining silver halide would darken and cause fogging of the image. Fixation is commonly achieved by treating the film or paper with a solution of thiosulfate salt. Popular salts are sodium thiosulfate—commonly called hypo—and ammonium thiosulfate—commonly used in modern rapid fixer formulae.^[1] Fixation involves these chemical reactions (X = halide, typically Br⁻):^[2]

AgX + 2 S₂O₃²⁻ → [Ag(S₂O₃)₂]³⁻ + X⁻

AgX + 3 S₂O₃²⁻ → [Ag(S₂O₃)₃]⁵⁻ + X⁻

In addition to thiosulphate the fixer typically contains mildly acidic compounds to adjust the pH and suppress trace amounts of the

films.

Chromogenic films

In

agent. The fixing agent reduces the silver which is then dissolved by the chelating agent.

Washing and stabilisation

After fixation, washing is important to remove the exhausted chemicals from the emulsion. Otherwise they cause image deterioration. Other treatments of the remaining silver-based image are sometimes used to prevent "burning".

References

This filmmaking article is a stub. You can help Wikipedia by expanding it.

• v
• t
• e