Pound (force)

Source: Wikipedia, the free encyclopedia.
Pound-force
British Gravitational System
Symbollbf
Conversions
1 lbf in ...... is equal to ...
   
Absolute English System
   32.17405 pdl

The pound of force or pound-force (symbol: lbf,

foot–pound–second system.[3]

Pound-force should not be confused with

pound-foot (lbf⋅ft), a unit of torque
.

Definitions

The pound-force is equal to the gravitational force exerted on a mass of one avoirdupois pound on the surface of Earth. Since the 18th century, the unit has been used in low-precision measurements, for which small changes in Earth's gravity (which varies from equator to pole by up to half a percent) can safely be neglected.[4]

The 20th century, however, brought the need for a more precise definition, requiring a standardized value for acceleration due to gravity.

Product of avoirdupois pound and standard gravity

The pound-force is the product of one

avoirdupois pound (exactly 0.45359237 kg) and the standard acceleration due to gravity, approximately 32.174049 ft/s2 (9.80665 m/s2).[5][6][7]

The standard values of acceleration of the standard gravitational field (gn) and the international avoirdupois pound (lb) result in a pound-force equal to 32.174049 ft⋅lb/s2 (4.4482216152605 N).[b]

This definition can be rephrased in terms of the slug. A slug has a mass of 32.174049 lb. A pound-force is the amount of force required to accelerate a slug at a rate of 1 ft/s2, so:

Conversion to other units

Units of force
newton dyne kilogram-force,
kilopond
pound-force poundal
1 N ≡ 1 kg⋅m/s2 = 105 dyn ≈ 0.10197 kp ≈ 0.22481 lbf ≈ 7.2330 pdl
1 dyn = 10–5 N  1 g⋅cm/s2  1.0197×10−6 kp  2.2481×10−6 lbf  7.2330×10−5 pdl
1 kp = 9.80665 N = 980665 dyn  gn × 1 kg  2.2046 lbf  70.932 pdl
1 lbf  4.448222 N  444822 dyn  0.45359 kp  gn × 1 lb  32.174 pdl 
1 pdl  0.138255 N  13825 dyn  0.014098 kp  0.031081 lbf  1 lb⋅ft/s2
The value of gn as used in the official definition of the kilogram-force (9.80665 m/s2) is used here for all gravitational units.

Foot–pound–second (FPS) systems of units

In some contexts, the term "pound" is used almost exclusively to refer to the unit of force and not the unit of mass. In those applications, the preferred unit of mass is the slug, i.e. lbf⋅s2/ft. In other contexts, the unit "pound" refers to a unit of mass. The international standard symbol for the pound as a unit of mass is lb.[8]

Three approaches to units of mass and force or weight[9][10]
Base Force Weight Mass
2nd law of motion m = F/a F = Wa/g F = ma
System
BG
GM EE M
AE
CGS MTS SI
Acceleration (a) ft/s2 m/s2 ft/s2 m/s2 ft/s2 Gal m/s2 m/s2
Mass (m) slug
hyl
pound-mass kilogram pound gram tonne kilogram
Force (F),
weight (W)
pound
kilopond
pound-force kilopond poundal dyne sthène newton
Pressure (p) pound per square inch
technical atmosphere
pound-force per square inch standard atmosphere poundal per square foot barye
pieze
pascal

In the "engineering" systems (middle column), the weight of the mass unit (pound-mass) on Earth's surface is approximately equal to the force unit (pound-force). This is convenient because one pound mass exerts one pound force due to gravity. Note, however, unlike the other systems the force unit is not equal to the mass unit multiplied by the acceleration unit[11]—the use of Newton's second law, F = ma, requires another factor, gc, usually taken to be 32.174049 (lb⋅ft)/(lbf⋅s2). "Absolute" systems are coherent systems of units: by using the slug as the unit of mass, the "gravitational" FPS system (left column) avoids the need for such a constant. The

SI
is an "absolute" metric system with kilogram and meter as base units.

Pound of thrust

The term pound of thrust is an alternative name for pound-force in specific contexts. It is frequently seen in US sources on jet engines and rocketry, some of which continue to use the FPS notation. For example, the thrust produced by each of the Space Shuttle's two Solid Rocket Boosters was 3,300,000 pounds-force (14.7 MN), together 6,600,000 pounds-force (29.4 MN).[12][13]

See also

Notes and references

  1. ^ Despite its name, this system is based on United States customary units and is only used in the US.
  2. ^ The international avoirdupois pound is defined to be exactly 0.45359237 kg.
  1. ^ IEEE Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units), IEEE Std 260.1™-2004 (Revision of IEEE Std 260.1-1993)
  2. from the original on 2019-12-06, retrieved 2017-08-03.: 257 
  3. ^ "Mass and Weight". engineeringtoolbox.com. Archived from the original on 2010-08-18. Retrieved 2010-08-03.
  4. ^ Acceleration due to gravity varies over the surface of the Earth, generally increasing from about 32.1 ft/s2 (9.78 m/s2) at the equator to about 32.3 ft/s2 (9.83 m/s2) at the poles.
  5. ^ BS 350 : Part 1: 1974 Conversion factors and tables, Part 1. Basis of tables. Conversion factors. British Standards Institution. 1974. p. 43.
  6. ^ In 1901 the third CGPM Archived 2012-02-07 at the Wayback Machine declared (second resolution) that:

    The value adopted in the International Service of Weights and Measures for the standard acceleration due to Earth's gravity is 980.665 cm/s2, value already stated in the laws of some countries.

    This value was the conventional reference for calculating the kilogram-force, a unit of force whose use has been deprecated since the introduction of SI.

  7. NIST
    Special Publication 811, Appendix B note 24
  8. ^ IEEE Std 260.1™-2004, IEEE Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
  9. .
  10. .
  11. ^ The acceleration unit is the distance unit divided by the time unit squared.
  12. ^ "Space Launchers - Space Shuttle". www.braeunig.us. Archived from the original on 6 April 2018. Retrieved 16 February 2018. Thrust: combined thrust 29.36 MN SL (maximum thrust at launch reducing by 1/3 after 50 s)
  13. wired.com. Archived
    from the original on 25 September 2019. Retrieved 25 November 2019.

General sources

  • Obert, Edward F. (1948). Thermodynamics. New York: D. J. Leggett Book Company. Chapter I "Survey of Dimensions and Units", pp. 1-24.