Power (physics)

Source: Wikipedia, the free encyclopedia.

Power
Common symbols
P
SI unit
watt (W)
In SI base unitskgm2s−3
Derivations from
other quantities
Dimension

In physics, power is the amount of energy transferred or converted per unit time. In the International System of Units, the unit of power is the watt, equal to one joule per second. In older works, power is sometimes called activity.[1][2][3] Power is a scalar quantity.

Specifying power in particular systems may require attention to other quantities; for example, the power involved in moving a ground vehicle is the product of the

circuit is the product of the current flowing through the element and of the voltage across the element.[4][5]

Definition

Power is the rate with respect to time at which work is done; it is the time derivative of work:

where P is power, W is work, and t is time.

We will now show that the mechanical power generated by a force F on a body moving at the velocity v can be expressed as the product:

If a constant force F is applied throughout a distance x, the work done is defined as . In this case, power can be written as:

If instead the force is variable over a three-dimensional curve C, then the work is expressed in terms of the line integral:

From the fundamental theorem of calculus, we know that

Hence the formula is valid for any general situation.

Units

The dimension of power is energy divided by time. In the

tons of refrigeration
.

Average power and instantaneous power

As a simple example, burning one kilogram of

TNT,[6]
but because the TNT reaction releases energy more quickly, it delivers more power than the coal. If ΔW is the amount of
work performed during a period of time
of duration Δt, the average power Pavg over that period is given by the formula
It is the average amount of work done or energy converted per unit of time. Average power is often called "power" when the context makes it clear.

Instantaneous power is the limiting value of the average power as the time interval Δt approaches zero.

When power P is constant, the amount of work performed in time period t can be calculated as

In the context of energy conversion, it is more customary to use the symbol E rather than W.

Mechanical power

One metric horsepower is needed to lift 75 kilograms by 1 metre in 1 second.

Power in mechanical systems is the combination of forces and movement. In particular, power is the product of a force on an object and the object's velocity, or the product of a torque on a shaft and the shaft's angular velocity.

Mechanical power is also described as the time derivative of work. In

work done by a force F on an object that travels along a curve C is given by the line integral
:
where x defines the path C and v is the velocity along this path.

If the force F is derivable from a potential (conservative), then applying the gradient theorem (and remembering that force is the negative of the gradient of the potential energy) yields:

where A and B are the beginning and end of the path along which the work was done.

The power at any point along the curve C is the time derivative:

In one dimension, this can be simplified to:

In rotational systems, power is the product of the torque τ and angular velocity ω,

where ω is
radians per second
. The represents
scalar product
.

In fluid power systems such as

hydraulic
actuators, power is given by
where p is pressure in pascals or N/m2, and Q is volumetric flow rate in m3/s in SI units.

Mechanical advantage

If a mechanical system has no losses, then the input power must equal the output power. This provides a simple formula for the mechanical advantage of the system.

Let the input power to a device be a force FA acting on a point that moves with velocity vA and the output power be a force FB acts on a point that moves with velocity vB. If there are no losses in the system, then

and the mechanical advantage of the system (output force per input force) is given by

The similar relationship is obtained for rotating systems, where TA and ωA are the torque and angular velocity of the input and TB and ωB are the torque and angular velocity of the output. If there are no losses in the system, then

which yields the mechanical advantage

These relations are important because they define the maximum performance of a device in terms of

gear ratios
.

Electrical power

Ansel Adams photograph of electrical wires of the Boulder Dam Power Units
Ansel Adams photograph of electrical wires of the Boulder Dam Power Units, 1941–1942

The instantaneous electrical power P delivered to a component is given by

where

  • is the instantaneous power, measured in watts (joules per second),
  • is the potential difference (or voltage drop) across the component, measured in volts, and
  • is the current through it, measured in amperes.

If the component is a resistor with time-invariant voltage to current ratio, then:

where
is the
electrical resistance, measured in ohms
.

Peak power and duty cycle

In a train of identical pulses, the instantaneous power is a periodic function of time. The ratio of the pulse duration to the period is equal to the ratio of the average power to the peak power. It is also called the duty cycle (see text for definitions).

In the case of a periodic signal of period , like a train of identical pulses, the instantaneous power is also a periodic function of period . The peak power is simply defined by:

The peak power is not always readily measurable, however, and the measurement of the average power is more commonly performed by an instrument. If one defines the energy per pulse as

then the average power is

One may define the pulse length such that so that the ratios

are equal. These ratios are called the duty cycle of the pulse train.

Radiant power

Power is related to intensity at a radius ; the power emitted by a source can be written as:[citation needed]

See also

References

  1. from the original on 23 April 2020. Power or Activity is the time rate of doing work, or if W represents work and P power, P = dw/dt. (p. xxviii) ... ACTIVITY. Power or rate of doing work; unit, the watt. (p. 435)
  2. ^ Heron, C. A. (1906). "Electrical Calculations for Rallway Motors". Purdue Eng. Rev. (2): 77–93. Archived from the original on 23 April 2020. Retrieved 23 April 2020. The activity of a motor is the work done per second, ... Where the joule is employed as the unit of work, the international unit of activity is the joule-per-second, or, as it is commonly called, the watt. (p. 78)
  3. . If the watt is assumed as unit of activity...
  4. ^ David Halliday; Robert Resnick (1974). "6. Power". Fundamentals of Physics.
  5. ^ Chapter 13, § 3, pp 13-2,3 The Feynman Lectures on Physics Volume I, 1963
  6. megajoules per kilogram, while detonating TNT produces about 4.7 megajoules per kilogram. For the coal value, see Fisher, Juliya (2003). "Energy Density of Coal". The Physics Factbook. Retrieved 30 May 2011. For the TNT value, see the article TNT equivalent
    . Neither value includes the weight of oxygen from the air used during combustion.