Respirator

Source: Wikipedia, the free encyclopedia.
(Redirected from
Respirators
)
For the mechanical device used to assist breathing, see Ventilator. For the mask worn during surgery, see Surgical mask.

White, disposable Standard N95 filtering facepiece respirator
A half-face elastomeric air-purifying respirator. This kind of respirator is reusable, with the filters being replaced periodically.
Lab worker wearing a powered air-purifying respirator

A respirator is a device designed to protect the wearer from inhaling hazardous atmospheres including

viruses
. There are two main categories of respirators: the air-purifying respirator, in which respirable air is obtained by filtering a contaminated atmosphere, and the air-supplied respirator, in which an alternate supply of breathable air is delivered. Within each category, different techniques are employed to reduce or eliminate noxious airborne contaminants.

Air-purifying respirators range from relatively inexpensive, single-use, disposable face masks sometimes referred to as a

filtering facepiece respirator to a more robust reusable model with replaceable cartridges called an elastomeric respirator. Powered air-purifying respirators
(PAPR), use a pump or fan to constantly move air through a filter and supply purified air into a mask, helmet or hood.

Physical form

Types of respirators by physical form. Click to enlarge.

All respirators have some type of facepiece held to the wearer's head with straps, a cloth harness, or some other method. Facepieces come in many different styles and sizes to accommodate all types of face shapes. The differences in respirator designs impact the respirator assigned protection factors, i.e. the resulting degree of protection from specific kinds of hazards.[citation needed]

Respirators can have half-face forms that cover the bottom half of the face including the nose and mouth, and full-face forms that cover the entire face. Half-face respirators are only effective in environments where the contaminants are not toxic to the eyes or facial area. For example, someone who is spray painting could wear a half-face respirator, but someone who works with chlorine gas would have to wear a full-face respirator.[citation needed]

An

escape respirator
may have no component that would normally be described as a mask, and may use a bite-grip mouthpiece and nose clip instead.

Use

A wide range of industries use respirators including healthcare & pharmaceuticals, defense & public safety services (defense, firefighting & law enforcement), oil and gas industries, manufacturing (automotive, chemical, metal fabrication, food and beverage, wood working, paper and pulp), mining, construction, agriculture and forestry, cement production, power generation, painting, shipbuilding, and the textile industry.[1]

Respirators require user training in order to provide proper protection.

User seal check

Each time a wearer dons a respirator, they must perform a seal check to be sure that they have an airtight seal to the face so that air does not leak around the edges of the respirator. (PAPR respirators may not require this because they don't necessarily seal to the face.) This check is different than the periodic fit test that is performed by specially trained personnel using testing equipment. Filtering facepiece respirators are typically checked by cupping the hands over the facepiece while exhaling (positive pressure check) or inhaling (negative pressure check) and observing any air leakage around the facepiece. Elastomeric respirators are checked in a similar manner, except the wearer blocks the airways through the inlet valves (negative pressure check) or exhalation valves (positive pressure check) while observing the flexing of the respirator or air leakage. Manufacturers have different methods for performing seal checks and wearers should consult the specific instructions for the model of respirator they are wearing. Some models of respirators or filter cartridges have special buttons or other mechanisms built into them to facilitate seal checks.[2]

Fit testing

Main article: Respirator fit test

Most types of respirators depend upon forming a good seal between the respirator body and the face of the wearer. Fit testing procedures have been developed to ensure that the respirator is appropriate for the wearer and the wearer's donning technique is capable of creating an adequate seal.[3] Poor fit can have a negative impact on the respirator's overall filtering effectiveness by as much as 65%.[4] A study on respirator effectiveness conducted in Beijing found that facial fit was the primary contributor to total inward leakage (TIL), based on a test of nine different models.[5] Facial hair such as a beard can interfere with proper fit.[6]

Qualitative fit testing typically subjects the wearer to an atmosphere containing an aerosol that can be detected by the wearer, such as

Workplace protection factor (PF) of filtering facepiece, measured in real time with two optical dust meters. In-facepiece dust concentration is changed dozens of times in a matter of minutes due to changes of the size of the gaps between the mask and face.[7]

A U.S. Department of Labor study[8] showed that in almost 40 thousand American enterprises, the requirements for the correct use of respirators are not always met.

Experts note that in practice it is difficult to achieve elimination of occupational morbidity with the help of respirators:

It is well known how ineffective ... trying to compensate the harmful workplace conditions with ... the use of respirators by employees.[9]

Unfortunately, the only certain way of reducing the exceedance fraction to zero is to ensure that Co (note: Co - concentration of pollutants in the breathing zone) never exceeds the PEL value.[10]

The

very limited field tests of air-purifying respirator performance in the workplace show that respirators may perform far less well under actual use conditions than is indicated by laboratory fit factors. We are not yet able to predict the level of protection accurately; it will vary from person to person, and it may also vary from one use to the next for the same individual. In contrast, we can predict the effectiveness of engineering controls, and we can monitor their performance with commercially available state-of-the-art devices.[11]

Contrast with surgical mask

A table listing the attributes of surgical masks and N95 respirators in eight categories
An infographic on the difference between surgical masks and N95 respirators

A

droplets, splashes, sprays, or splatter that may contain viruses and bacteria. Surgical masks may also help reduce exposure from the wearer's saliva and respiratory secretions to others, especially during surgical procedures.[12]

A surgical mask, by design, does not filter or block very small particles from the outside air that may be transmitted by coughs, sneezes, or certain medical procedures to the wearer. Surgical masks also do not provide complete protection from germs and other contaminants because of the loose fit between the surface of the face mask and the face.[12]

Collection efficiency of surgical mask filters can range from less than 10% to nearly 90% for different manufacturers' masks when measured using the test parameters for NIOSH certification. However, a study found that even for surgical masks with "good" filters, 80–100% of subjects failed an OSHA-accepted qualitative fit test, and a quantitative test showed 12–25% leakage.[13]

The U.S. Centers for Disease Control and Prevention (CDC) recommends surgical masks in procedures where there can be an aerosol generation from the wearer, if small aerosols can produce a disease to the patient.[14]

Surgical N95

Head-and-shoulders photo of a middle-aged white woman. Her blonde hair is tied in a bun. Her nose and mouth are covered by a teal respirator with head and neck straps. She is wearing royal blue coveralls.
Astronaut Kate Rubins wearing a 3M 1860 "surgical N95" respirator

Some N95 respirators have also been cleared by the

U.S. National Institute for Occupational Safety and Health (NIOSH) and U.S. Food and Drug Administration as surgical and are labeled "surgical N95", "medical respirators," or "healthcare respirators". These protect the patient and others from the wearer's respiratory emissions (as a surgical mask would) as well as protect the wearer from airborne particulates and aerosols (as a standard N95 respirator). Unlike a standard N95 respirator, FDA-cleared "healthcare respirators" also provide protection from high-pressure streams or jets of bodily fluid, such as blood.[15][16]

The CDC recommends the use of respirators with at least N95 certification to protect the wearer from inhalation of infectious particles including

Ebola.[17]

Escape respirators

A simple Dräger escape respirator. This model has no hood, and instead comes with noseclips to ensure the wearer breathes only through the filter.
See also: Smoke hood

Escape respirators or

chemical, biological, radiological, and nuclear (CBRN) terrorism incidents.[citation needed] The American National Standards Institute (ANSI) and the International Safety Equipment Association (ISEA) established the American National Standard for Air-Purifying Respiratory Protective Smoke Escape Devices to define both test criteria and approval methods for fire/smoke escape hoods. ANSI/ISEA Standard 110 provides design guidance to manufacturers of Respiratory Protective Smoke Escape Devices (RPED) in the form of performance requirements and testing procedures. The standard covers certification, ISO registration for the manufacturer, associated test methods, labeling, conditioning requirements, independent process and quality control audits, and follow-up inspection programs.[18]

ANSI/ISEA 110 was prepared by members of the ISEA RPED group, in consultation with testing laboratories and was reviewed by a consensus panel representing users, health and safety professionals and government representatives.[citation needed] The U.S. Consumer Product Safety Commission uses ANSI/ISEA 110 as the benchmark in their testing of fire escape masks.[citation needed]

Air-purifying respirators

Air-purifying respirators are respirators that draw in the surrounding air and purify it before it is breathed (unlike air-supplying respirators, which are sealed systems, with no air intake, like those used underwater). Air-purifying respirators are used against particulates, gases, and vapors that are at atmospheric concentrations less than immediately dangerous to life and health. They may be negative-pressure respirators driven by the wearer's inhalation and exhalation, or positive-pressure units such as powered air-purifying respirators (PAPRs).

Air-purifying respirators may use one or both of two kinds of filtration: mechanical filters retain particulate matter, while chemical cartridges remove gases, volatile organic compounds (VOCs), and other vapors. Additionally, air-purifying respirators may come in many forms: filtering facepiece respirators consist solely of a disposable mechanical filter; elastomeric respirators are reusable but have replaceable filters attached to the mask; and powered air-purifying respirators have a battery-powered blower that moves the airflow through the filters.

According to the NIOSH Respirator Selection Logic, air-purifying respirators are recommended for concentrations of hazardous particulates or gases that are greater than the relevant

oxygen-deficient atmosphere, or in an unknown atmosphere; in these situations a self-contained breathing apparatus is recommended instead.[19]

Types of filtration

Mechanical filter

Main article:
woodworking or metal processing, when contaminated air is passed through the filter material. Since the filters cannot be cleaned and reused and have a limited lifespan, cost and disposability are key factors. Single-use, disposable and replaceable cartridge models exist.[citation needed
]

Mechanical filters remove contaminants from air in several ways: interception when particles following a line of flow in the airstream come within one radius of a fiber and adhere to it; impaction, when larger particles unable to follow the curving contours of the airstream are forced to embed in one of the fibers directly; this increases with diminishing fiber separation and higher air flow velocity; by diffusion, where gas molecules collide with the smallest particles, especially those below 100 nm in diameter, which are thereby impeded and delayed in their path through the filter, increasing the probability that particles will be stopped by either of the previous two mechanisms; and by using an

electrostatic charge
that attracts and holds particles on the filter surface.

There are many different filtration standards that vary by jurisdiction. In the

airborne particles but is not resistant to oil
.

Other categories filter 99% or 99.97% of particles, or have varying degrees of resistance to oil.[20]

In the

FFP masks.[21]

According to

NIOSH-approved respirators never include earloops because they don't provide enough support to establish a reliable, airtight seal.) Those standards include the Chinese KN95, Australian / New Zealand P2, Korean 1st Class also referred to as KF94, and Japanese DS.[22]

Chemical cartridge

end-of-service-life indicator, ESLI
).
Main article:
Respirator cartridge

Chemical cartridge respirators use a cartridge to remove gases,

activated charcoal or certain resins. The service life of the cartridge varies based, among other variables, on the carbon weight and molecular weight of the vapor and the cartridge media, the concentration of vapor in the atmosphere, the relative humidity of the atmosphere, and the breathing rate of the respirator wearer. When filter cartridges become saturated or particulate accumulation within them begins to restrict air flow, they must be changed.[23]

If the concentration of harmful gases is

NIOSH also discourages their use under such conditions.[25]

Form factors

Filtering facepiece

A white cup-type filtering facepiece respirator with an exhalation valve and red head and neck straps
Filtering facepiece half mask with exhalation valve (class: FFP3)

Filtering facepiece respirators are discarded when they become unsuitable for further use due to considerations of hygiene, excessive resistance, or physical damage.

Surgical N95
mask. It is discarded after single use or some extended period depending on the contaminant.

Elastomeric

New York Police Department officer wearing a 3M elastomeric respirator with P100-standard particulate filters in the aftermath of the 2007 New York City steam explosion
Main article: Elastomeric respirator

Elastomeric respirators are reusable because the facepiece is cleaned and reused, but the filter cartridges are discarded and replaced when they become unsuitable for further use.[26] These are replaceable-cartridge, multiple-use models. Typically one or two cartridges attach securely to a mask which has built into it a corresponding number of valves for inhalation and one for exhalation.

Powered air-purifying respirators

Main article: Powered air-purifying respirator

filters to the user for breathing. The fan and filters may be carried by the user or they may be remotely mounted and the user breathes the air through tubing.[citation needed
]

The filter type must be matched to the contaminants that need to be removed. Some PAPR's are designed to remove fine particulate matter, while others are suitable for working with

spray paints. These must have their filter elements replaced more often than a particulate filter.[citation needed
]

Atmosphere-supplying respirators

These respirators do not purify the ambient air, but supply breathing gas from another source. The three types are the self contained breathing apparatus, in which a compressed air cylinder is worn by the wearer; the supplied air respirators, where a hose supplies air from a stationary source; and combination respirators that integrate both types.[27]

According to the NIOSH Respirator Selection Logic, atmosphere-supplying are recommended for concentrations of hazardous particulates or gases that are greater than the

oxygen-deficient atmosphere; and in an unknown atmosphere.[19]

Self-contained breathing apparatus

Main article: Self-contained breathing apparatus

A self-contained breathing apparatus (SCBA) typically has three main components: a high-pressure air cylinder (e.g., 2200 psi to 4500 psi), a pressure gauge and regulator, and an inhalation connection (mouthpiece, mouth mask or full face mask), connected together and mounted to a carrying frame or a harness with adjustable shoulder straps and belt so it can be worn on the back. There are two kinds of SCBA: open circuit and closed circuit. Most modern SCBAs are open-circuit. [citation needed]

Open-circuit industrial breathing sets are filled with filtered, compressed air. The compressed air passes through a regulator, is inhaled and exhaled out of the circuit, quickly depleting the supply of air. Air cylinders are made of aluminum, steel, or of a composite construction like fiberglass-wrapped aluminum. The "positive pressure" type is common, which supplies a steady stream of air to stop fumes or smoke from leaking into the mask. Other SCBA's are of the "demand" type, which only supply air when the regulator senses the user inhaling. All fire departments and those working in toxic environments use the positive pressure SCBA for safety reasons.[citation needed]

The closed-circuit type SCBA filters, supplements, and recirculates exhaled gas like a rebreather. It is used when a longer-duration supply of breathing gas is needed, such as in mine rescue and in long tunnels, and going through passages too narrow for a large open-circuit air cylinder.[citation needed]

Supplied air respirator

Main article: Supplied-air respirator

Supplied air respirators make use of a hose to deliver air from a stationary source. It provides clean air for long periods of time and are light weight for the user, although it limits user mobility. They are normally used when there are extended work periods required in atmospheres that are not immediately dangerous to life and health (IDLH).[27]

Disadvantages

Extended use of respirators can result in higher levels of carbon dioxide than recommended in a work environment,[28][29][30][31][32][33] and can lead to headaches,[34] dermatitis and acne.[35]

Regulation

The choice and use of respirators in developed countries is regulated by national legislation. To ensure that employers choose respirators correctly, and perform high-quality respiratory protection programs, various guides and textbooks have been developed:

For standard filter classes used in respirators, see Mechanical filter (respirator)#Filtration standards.

History

Earliest records to 19th century

Plague doctor

The history of protective respiratory equipment can be traced back as far as the first century, when Pliny the Elder (c. 23 AD–79) described using animal bladder skins to protect workers in Roman mines from red lead oxide dust.[61] In the 16th century, Leonardo da Vinci suggested that a finely woven cloth dipped in water could protect sailors from a toxic weapon made of powder that he had designed.[62]

In 1785, Jean-François Pilâtre de Rozier invented a respirator.

Alexander von Humboldt introduced a primitive respirator in 1799 when he worked as a mining engineer in Prussia.[63] Practically all respirators in the early 18th century consisted of a bag placed completely over the head, fastened around the throat with windows through which the wearer could see. Some were

rubber, some were made of rubberized fabric, and still others of impregnated fabric, but in most cases a tank of compressed air or a reservoir of air under slight pressure was carried by the wearer to supply the necessary breathing air. In some devices certain means were provided for the adsorption of carbon dioxide in exhaled air and the rebreathing of the same air many times; in other cases valves allowed exhalation of used air.[citation needed
]

Julius Jeffreys first used the word "respirator" as a mask in 1836.[64] The mask worked by capturing moisture and warmth in exhaled air in a grid of fine metal wires. Inhaled air then was warmed and moistened as it passed through the same metal grid, providing relief to people with lung diseases. The Respirator became popular, and was mentioned in the literature of the day, including in the writings of Elizabeth Gaskell, William Makepeace Thackeray and Charles Dickens.

Woodcut of Stenhouse's mask
"How a Man may Breathe Safely in a Poisonous Atmosphere", an apparatus providing oxygen while using caustic soda to absorb carbon dioxide, 1909

In 1848, the first US patent for an air-purifying respirator was granted to

Lewis P. Haslett[65] for his 'Haslett's Lung Protector,' which filtered dust from the air using one-way clapper valves and a filter made of moistened wool or a similar porous substance.[66] Following Haslett, a long string of patents were issued for air purifying devices, including patents for the use of cotton fibers as a filtering medium, for charcoal and lime absorption of poisonous vapors, and for improvements on the eyepiece and eyepiece assembly.[citation needed] Hutson Hurd patented a cup-shaped mask in 1879 which became widespread in industrial use, and Hurd's H.S. Cover Company was still in business in the 1970s.[67]

Inventors in Europe included

glycerin, and charcoal, and in 1871 invented a 'fireman's respirator', a hood that filtered smoke and gas from air, which he exhibited at a meeting of the Royal Society in London in 1874.[69] Also in 1874, Samuel Barton patented a device that 'permitted respiration in places where the atmosphere is charged with noxious gases, or vapors, smoke, or other impurities.'[70][71] German Bernhard Loeb patented several inventions to 'purify foul or vitiated air,' and counted the Brooklyn Fire Department among his customers.[citation needed
]

A predecessor of the N95 was a design by Doctor

Lien-teh Wu who was working for the Chinese Imperial Court in the fall of 1910, which was the first that protected users from bacteria in empirical testing. Subsequent respirators were reusable but bulky and uncomfortable. In the 1970s, the Bureau of Mines and NIOSH developed standards for single-use respirators, and the first N95 respirator was developed by 3M and approved in 1972.[72]

World War I

The first recorded response and defense against chemical attacks using respirators occurred during the

trenches. Reserve Canadian troops, who were away from the attack, used urine-soaked cloths as primitive respirators. A Canadian soldier realized that the ammonia in urine would react with the chlorine, neutralizing it, and that the water would dissolve the chlorine, allowing soldiers to breathe through the gas.[citation needed
]

21st century

China normally makes 10 million masks per day, about half of the world production. During the COVID-19 pandemic, 2,500 factories were converted to produce 116 million daily.[73]

During the COVID-19 pandemic, people in the United States, and in a lot of countries in the world, were urged to make their own cloth masks due to the widespread shortage of commercial masks.[74]

See also

References

  1. ^ "Respirator use and practices". U.S. Bureau of Labour Statistics.
  2. ^ "Filtering out Confusion: Frequently Asked Questions about Respiratory Protection, User Seal Check (2018)" (PDF). NIOSH. Retrieved 8 December 2021.
  3. ^ "29 CFR 1910.134 Appendix A: Fit Testing Procedures (Mandatory)". United States Occupational Safety and Health Administration (OSHA).
  4. ^ "Puraka Clean Air Resources for Particulate Pollution & Smoke". www.cleanairresources.com. Retrieved 26 February 2019.
  5. PMID 29632130
    .
  6. ^ "To Beard or not to Beard? That's a good Question! | | Blogs | CDC". 2 November 2017. Retrieved 27 February 2020.
  7. PMID 15668259.{{cite journal}}: CS1 maint: multiple names: authors list (link
    )
  8. ^ U.S. Department of Labor, Bureau of Labor Statistics. Respirator Usage in Private Sector Firms, 2001 (PDF). Morgantown, WV: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. p. 273. Retrieved 22 January 2019.
  9. ISSN 1026-9428
    .
  10. PMID 1496932
    . Retrieved 22 January 2018.
  11. ISSN 0892-6298
    . Retrieved 22 January 2018.
  12. ^ a b "N95 Respirators and Surgical Masks (Face Masks)". U.S. Food and Drug Administration. 11 March 2020. Retrieved 28 March 2020. Public Domain This article incorporates text from this source, which is in the public domain.
  13. ^ Brosseau, Lisa; Ann, Roland Berry (14 October 2009). "N95 Respirators and Surgical Masks". NIOSH Science Blog. Retrieved 28 March 2020. Public Domain This article incorporates text from this source, which is in the public domain.
  14. ^ "Isolation Precautions". U.S. Centers for Disease Control and Prevention. 22 July 2019. Retrieved 9 February 2020.
  15. ^ "Respirator Trusted-Source Information: Ancillary Respirator Information". U.S. National Institute for Occupational Safety and Health. 26 January 2018. Retrieved 12 February 2020.
  16. ^ "Surgical N95 vs. Standard N95 – Which to Consider? Technical Bulletin Revision 3" (PDF). June 2020. Archived from the original (PDF) on 6 July 2020. Retrieved 6 July 2020.
  17. ^ 2007 Guideline for Isolation Precautions: Preventing Transmission of Infectious Agents in Healthcare Settings (PDF). U.S. Centers for Disease Control and Prevention. July 2019. pp. 55–56. Retrieved 9 February 2020.
  18. ^ "International Safety Equipment Association". Safetyequipment.org. Retrieved 18 April 2010.
  19. ^
    doi:10.26616/NIOSHPUB2005100
    . Retrieved 20 April 2020.
  20. ISSN 0343-6993
    .
  21. ^ https://www.hsa.ie/eng/Publications_and_Forms/Publications/Chemical_and_Hazardous_Substances/Respiratory%20Protective%20Equipment.pdf [bare URL PDF]
  22. ^ "Technical Bulletin: Comparison of FFP2, KN95, and N95 and Other Filtering Facepiece Respirator Classes" (PDF). 3M Personal Safety Division. January 2020.
  23. ^ The document describes the methods used previously and currently used to perform the timely replacement of cartridges in air purifying respirators.
  24. ^ OSHA standard 29 CFR 1910.134 "Respiratory Protection"
  25. doi:10.26616/NIOSHPUB2005100
    .
  26. ^ a b c "Respirator Trusted-Source Information: What are they?". U.S. National Institute for Occupational Safety and Health. 29 January 2018. Retrieved 27 March 2020.
  27. ^ a b "Respirator Selection: Air-purifying vs. Atmosphere-supplying Respirators". U.S. Occupational Safety and Health Administration. Retrieved 9 April 2020.
  28. PMID 23108786.{{cite journal}}: CS1 maint: multiple names: authors list (link
    )
  29. PMID 20420727.{{cite journal}}: CS1 maint: multiple names: authors list (link
    )
  30. ^ Sinkule E., Turner N., Hota S. (2003). "Automated breathing and metabolic simulator (ABMS) CO2 test for powered and non-powered air-purifying respirators, airline respirators, and gas mask". American Industrial Hygiene Conference and Exposition, May 10-15, 2003. Dallas, Texas: American Industrial Hygiene Association. p. 54.{{cite book}}: CS1 maint: multiple names: authors list (link) copy
  31. ISSN 0892-6298
    .
  32. PMID 15040632.{{cite journal}}: CS1 maint: multiple names: authors list (link
    )
  33. S2CID 40238982
    .
  34. PMID 16441251.{{cite journal}}: CS1 maint: multiple names: authors list (link
    )
  35. PMID 17026695.{{cite journal}}: CS1 maint: multiple names: authors list (link
    )
  36. doi:10.26616/NIOSHPUB87116
    . Retrieved 10 June 2018.
  37. doi:10.26616/NIOSHPUB2005100
    . Retrieved 10 June 2018.
  38. doi:10.26616/NIOSHPUB99143
    . Retrieved 10 June 2018.
  39. ^ Kathleen Kincade, Garnet Cooke, Kaci Buhl; et al. (2017). Janet Fults (ed.). Respiratory Protection Guide. Requirements for Employers of Pesticide Handlers. Worker Protection Standard (WPS). California: Pesticide Educational Resources Collaborative (PERC). p. 48. Retrieved 10 June 2018.{{cite book}}: CS1 maint: multiple names: authors list (link) PDF Wiki
  40. ^ Occupational Safety and Health Administration (1998). "Respiratory Protection eTool". OSHA (in English and Spanish). Washington, DC. Retrieved 10 June 2018.
  41. ^ Hilda L. Solis; et al. (2011). Small Entity Compliance Guide for the Respiratory Protection Standard. OSHA 3384-09. Washington, DC: Occupational Safety and Health Administration, U.S. Department of Labor. p. 124. Retrieved 10 June 2018. PDF Wiki
  42. ^ OSHA; et al. (2015). Hospital Respiratory Protection Program Toolkit. OSHA 3767. Resources for Respirator Program Administrators. Washington, DC: Occupational Safety and Health Administration, U.S. Department of Labor. p. 96. Retrieved 10 June 2018. PDF Wiki
  43. ^ J. Edgar Geddie (2012). A Guide to Respiratory Protection. Industry Guide 44 (2 ed.). Raleigh, North Carolina: Occupational Safety and Health Division, N.C. Department of Labor. p. 54. Retrieved 10 June 2018.
  44. ^ Patricia Young, Phillip Fehrenbacher & Mark Peterson (2014). Breathe Right! Oregon OSHA's guide to developing a respiratory protection program for small-business owners and managers. Publications: Guides 440-3330. Salem, Oregon: Oregon OSHA Standards and Technical Resources Section, Oregon Occupational Safety and Health. p. 44. Retrieved 10 June 2018. PDF Wiki
  45. ^ Patricia Young & Mark Peterson (2016). Air you breathe: Oregon OSHA's respiratory protection guide for agricultural employers. Publications: Guides 440-3654. Salem, Oregon: Oregon OSHA Standards and Technical Resources Section, Oregon Occupational Safety and Health. p. 32. Retrieved 10 June 2018.
  46. ^ Oregon OSHA (2014). "Section VIII / Chapter 2: Respiratory Protection". Oregon OSHA Technical Manual. Rules. Salem, Oregon: Oregon OSHA. p. 38. Retrieved 10 June 2018. PDF Wiki
  47. ^ Cal/OSHA Consultation Service, Research and Education Unit, Division of Occupational Safety and Health, California Department of Industrial Relations (2017). Respiratory Protection in the Workplace. A Practical Guide for Small-Business Employers (3 ed.). Santa Ana, California: California Department of Industrial Relations. p. 51. Retrieved 10 June 2018.{{cite book}}: CS1 maint: multiple names: authors list (link) PDF
  48. ^ K. Paul Steinmeyer; et al. (2001). Manual of Respiratory Protection Against Airborne Radioactive Material. NUREG/CR-0041, Revision 1. Washington, DC: Office of Nuclear Reactor Regulation, U.S. Nuclear Regulatory Commission. p. 166. Retrieved 10 June 2018. PDF Wiki
  49. ^ Gary P. Noonan, Herbert L. Linn , Laurence D. Reed; et al. (1986). Susan V. Vogt (ed.). A guide to respiratory protection for the asbestos abatement industry. NIOSH IA 85-06; EPA DW 75932235-01-1. Washington, DC: Environmental Protection Agency (EPA) & National Institute for Occupational Safety and Health (NIOSH). p. 173. Retrieved 10 June 2018.{{cite book}}: CS1 maint: multiple names: authors list (link)
  50. ISBN 978-2-550-37465-7
    . Retrieved 10 June 2018.; 2 edition: Jaime Lara, Mireille Vennes (26 August 2013). Guide pratique de protection respiratoire. DC 200-1635 2CORR (in French) (2 ed.). Montreal, Quebec (Canada): Institut de recherche Robert-Sauve en sante et en securite du travail (IRSST), Commission de la santé et de la sécurité du travail du Québec. p. 60.
    ISBN 978-2-550-40403-3. Archived from the original
    on 22 August 2019. Retrieved 10 June 2018.; online version: Jaime Lara, Mireille Vennes (2016). "Appareils de protection respiratoire". www.cnesst.gouv.qc.ca (in French). Quebec (Quebec, Canada): Commission des normes, de l'equite, de la sante et de la securite du travail. Archived from the original on 22 March 2021. Retrieved 10 June 2018.
  51. ^ Jacques Lavoie, Maximilien Debia, Eve Neesham-Grenon, Genevieve Marchand, Yves Cloutier (22 May 2015). "A support tool for choosing respiratory protection against bioaerosols". www.irsst.qc.ca. Montreal, Quebec (Canada): Institut de recherche Robert-Sauve en sante et en securite du travail (IRSST). Retrieved 10 June 2018.{{cite web}}: CS1 maint: multiple names: authors list (link) Publication no.: UT-024; Research Project: 0099-9230.
  52. ^ Jacques Lavoie, Maximilien Debia, Eve Neesham-Grenon, Genevieve Marchand, Yves Cloutier (22 May 2015). "Un outil d'aide a la prise de decision pour choisir une protection respiratoire contre les bioaerosols". www.irsst.qc.ca (in French). Montreal, Quebec (Canada): Institut de recherche Robert-Sauve en sante et en securite du travail (IRSST). Retrieved 10 June 2018.{{cite web}}: CS1 maint: multiple names: authors list (link) N° de publication : UT-024; Projet de recherche: 0099-9230.
  53. ISBN 978-2-7389-2303-5
    . Retrieved 10 June 2018.
  54. ^ Spitzenverband der gewerblichen Berufsgenossenschaften und der Unfallversicherungsträger der öffentlichen Hand (DGUV) (2011). BGR/GUV-R 190. Benutzung von Atemschutzgeräten (in German). Berlin: Deutsche Gesetzliche Unfallversicherung e.V. (DGUV), Medienproduktion. p. 174. Retrieved 10 June 2018. PDF
  55. ISBN 978-0-71766-454-2
    . Retrieved 10 June 2018.
  56. ^ The UK Nuclear Industry Radiological Protection Coordination Group (2016). Respiratory Protective Equipment (PDF). Good Practice Guide. London (UK): IRPCG. p. 29. Retrieved 10 June 2018.
  57. ISBN 978-1-84496-144-3. Retrieved 10 June 2018. PDF
  58. ISBN 978-0-477-03625-2. Archived from the original on 12 June 2018. Retrieved 10 June 2018. PDF Archived 29 January 2018 at the Wayback Machine
  59. ^ Christian Albornoz, Hugo Cataldo (2009). Guia para la seleccion y control de proteccion respiratoria. Guia tecnica (in Spanish). Santiago (Chile): Departamento de salud occupational, Instituto de Salud Publica de Chile. p. 40. Archived from the original on 22 August 2019. Retrieved 10 June 2018. PDF
  60. ^ Instituto Nacional de Seguridad, Salud y Bienestar en el Trabajo (INSSBT). Guia orientativa para la seleccion y utilizacion de protectores respiratorios. Documentos tecnicos INSHT (in Spanish). Madrid: Instituto Nacional de Seguridad, Salud y Bienestar en el Trabajo (INSHT). p. 16. Retrieved 10 June 2018. PDF
  61. ^ Naturalis_Historia/Liber_XXXIII#XL  (in Latin) – via Wikisource.
  62. ^ "Women in the US Military – History of Gas Masks". Chnm.gmu.edu. 11 September 2001. Retrieved 18 April 2010.
  63. ^ Humboldt, Alexander von (1799). "Ueber die unterirdischen Gasarten und die Mittel ihren Nachtheil zu vermindern". WorldAtlas. Retrieved 27 March 2020.
  64. ^ David Zuck (1990). "Julius Jeffreys: Pioneer of humidification" (PDF). Proceedings of the History of Anaesthesia Society. 8b: 70–80. Retrieved 16 August 2020.
  65. ISBN 9780313385520
    .
  66. ^ US patent 6529A, Lewis P. Haslett, "Lung Protector", published 1849-06-12, issued 1849-06-12 
  67. ^ [1], "Improvement in inhaler and respirator", issued 1879-08-26 
  68. ^ Britain, Royal Institution of Great (1858). Notices of the Proceedings at the Meetings of the Members of the Royal Institution, with Abstracts of the Discourses. W. Nicol, Printer to the Royal Institution. p. 53.
  69. JSTOR 112853
    .
  70. ^ "Gas Mask Development (1926)". 67.225.133.110. Retrieved 27 March 2020.
  71. ^ US patent 148868A, Samuel Barton, "Respirator", published 1874-03-24, issued 1874-03-24 
  72. ^ Wilson, Mark (24 March 2020). "The untold origin story of the N95 mask". Fast Company. Retrieved 27 March 2020.
  73. ^ Xie, John (19 March 2020). "World Depends on China for Face Masks But Can Country Deliver?". www.voanews.com. Voice of America. Archived from the original on 21 March 2020.
  74. ^ Hatmaker, Taylor (2 April 2020). "CDC recommends Americans wear cloth masks to limit spread of COVID-19". TechCrunch. Retrieved 23 April 2020.

Further reading

External links

Wikimedia Commons has media related to Respirators.
  • Air-Purifying Respirators (APR): cdc.gov/niosh. Respirator manufacturer approvals for NIOSH-certified air-purifying respirator with CBRN Protections (CBRN APR). This link covers APR and Air-Purifying Escape Respirators (APER) certified by the NIOSH's National Personal Protective Technology Laboratory (NPPTL), Pittsburgh, PA, to CBRN protection NIOSH standards. CBRN APR are tight-fitting, full-face respirators with approved accessories and protect the user breathing zone by relying on user negative pressure, fit testing and user seal checks to filter less than
    Immediately Dangerous to Life and Health (IDLH)
    concentrations of hazardous respiratory compounds and particulates through NIOSH CBRN Cap 1, Cap 2 or Cap 3 canisters for CBRN APR- or CBRN 15- or CBRN 30-rated APER.
  • PAPR: cdc.gov/niosh. Respirator manufacturer approvals for NIOSH-certified powered air-purifying respirator with CBRN Protections (CBRN PAPR-loose fitting or tight fitting)
Retrieved from "https://en.wikipedia.org/w/index.php?title=Respirator&oldid=1217884914"