Self-replicating machine
A self-replicating machine is a type of
A self-replicating machine is an artificial
Historians of
History
The general concept of artificial machines capable of producing copies of themselves dates back at least several hundred years. An early reference is an anecdote regarding the philosopher
In 1802
Von Neumann's kinematic model
A detailed conceptual proposal for a
Von Neumann's goal for his
Moore's artificial living plants
In 1956 mathematician Edward F. Moore proposed the first known suggestion for a practical real-world self-replicating machine, also published in Scientific American.[26][27] Moore's "artificial living plants" were proposed as machines able to use air, water and soil as sources of raw materials and to draw its energy from sunlight via a solar battery or a steam engine. He chose the seashore as an initial habitat for such machines, giving them easy access to the chemicals in seawater, and suggested that later generations of the machine could be designed to float freely on the ocean's surface as self-replicating factory barges or to be placed in barren desert terrain that was otherwise useless for industrial purposes. The self-replicators would be "harvested" for their component parts, to be used by humanity in other non-replicating machines.
Dyson's replicating systems
The next major development of the concept of self-replicating machines was a series of thought experiments proposed by physicist
Advanced Automation for Space Missions
In 1980, inspired by a 1979 "New Directions Workshop" held at Wood's Hole,
The reference design included small computer-controlled electric carts running on rails inside the factory, mobile "paving machines" that used large parabolic mirrors to focus sunlight on lunar
Power would be provided by a "canopy" of solar cells supported on pillars. The other machinery would be placed under the canopy.
A "casting robot" would use sculpting tools and templates to make plaster molds. Plaster was selected because the molds are easy to make, can make precise parts with good surface finishes, and the plaster can be easily recycled afterward using an oven to bake the water back out. The robot would then cast most of the parts either from nonconductive molten rock (basalt) or purified metals. A carbon dioxide laser cutting and welding system was also included.
A more speculative, more complex microchip fabricator was specified to produce the computer and electronic systems, but the designers also said that it might prove practical to ship the chips from Earth as if they were "vitamins."
A 2004 study supported by NASA's Institute for Advanced Concepts took this idea further.[32] Some experts are beginning to consider self-replicating machines for asteroid mining.
Much of the design study was concerned with a simple, flexible chemical system for processing the ores, and the differences between the ratio of elements needed by the replicator, and the ratios available in lunar regolith. The element that most limited the growth rate was chlorine, needed to process regolith for aluminium. Chlorine is very rare in lunar regolith.
Lackner-Wendt Auxon replicators
In 1995, inspired by Dyson's 1970 suggestion of seeding uninhabited deserts on Earth with self-replicating machines for industrial development, Klaus Lackner and Christopher Wendt developed a more detailed outline for such a system.[33][34][35] They proposed a colony of cooperating mobile robots 10–30 cm in size running on a grid of electrified ceramic tracks around stationary manufacturing equipment and fields of solar cells. Their proposal didn't include a complete analysis of the system's material requirements, but described a novel method for extracting the ten most common chemical elements found in raw desert topsoil (Na, Fe, Mg, Si, Ca, Ti, Al, C, O2 and H2) using a high-temperature carbothermic process. This proposal was popularized in Discover magazine, featuring solar-powered desalination equipment used to irrigate the desert in which the system was based.[36] They named their machines "Auxons", from the Greek word auxein which means "to grow".
Recent work
NIAC studies on self-replicating systems
In the spirit of the 1980 "Advanced Automation for Space Missions" study, the NASA Institute for Advanced Concepts began several studies of self-replicating system design in 2002 and 2003. Four phase I grants were awarded:
- Hod Lipson (Cornell University), "Autonomous Self-Extending Machines for Accelerating Space Exploration"[37]
- Gregory Chirikjian (Johns Hopkins University), "Architecture for Unmanned Self-Replicating Lunar Factories"[38]
- Paul Todd (Space Hardware Optimization Technology Inc.), "Robotic Lunar Ecopoiesis"[39][40]
- Tihamer Toth-Fejel (General Dynamics), "Modeling Kinematic Cellular Automata: An Approach to Self-Replication"[41][42] The study concluded that complexity of the development was equal to that of a Pentium 4, and promoted a design based on cellular automata.
Bootstrapping self-replicating factories in space
In 2012, NASA researchers Metzger, Muscatello, Mueller, and Mantovani argued for a so-called "bootstrapping approach" to start self-replicating factories in space.[43] They developed this concept on the basis of In Situ Resource Utilization (ISRU) technologies that NASA has been developing to "live off the land" on the Moon or Mars. Their modeling showed that in just 20 to 40 years this industry could become self-sufficient then grow to large size, enabling greater exploration in space as well as providing benefits back to Earth. In 2014, Thomas Kalil of the White House Office of Science and Technology Policy published on the White House blog an interview with Metzger on bootstrapping solar system civilization through self-replicating space industry.[44] Kalil requested the public submit ideas for how "the Administration, the private sector, philanthropists, the research community, and storytellers can further these goals." Kalil connected this concept to what former NASA Chief technologist Mason Peck has dubbed "Massless Exploration", the ability to make everything in space so that you do not need to launch it from Earth. Peck has said, "...all the mass we need to explore the solar system is already in space. It's just in the wrong shape."[45] In 2016, Metzger argued that fully self-replicating industry can be started over several decades by astronauts at a lunar outpost for a total cost (outpost plus starting the industry) of about a third of the space budgets of the International Space Station partner nations, and that this industry would solve Earth's energy and environmental problems in addition to providing massless exploration.[46]
New York University artificial DNA tile motifs
In 2011, a team of scientists at New York University created a structure called 'BTX' (bent triple helix) based around three double helix molecules, each made from a short strand of DNA. Treating each group of three double-helices as a code letter, they can (in principle) build up self-replicating structures that encode large quantities of information.[47][48]
Self-replication of magnetic polymers
In 2001, Jarle Breivik at University of Oslo created a system of magnetic building blocks, which in response to temperature fluctuations, spontaneously form self-replicating polymers.[49]
Self-replication of neural circuits
In 1968,
Harvard Wyss Institute
November 29, 2021 a team at Harvard Wyss Institute built the first living robots that can reproduce.[53]
Self-replicating spacecraft
The idea of an automated spacecraft capable of constructing copies of itself was first proposed in scientific literature in 1974 by
Prospects for implementation
As the use of industrial automation has expanded over time, some factories have begun to approach a semblance of self-sufficiency that is suggestive of self-replicating machines.[57] However, such factories are unlikely to achieve "full closure"[58] until the cost and flexibility of automated machinery comes close to that of human labour and the manufacture of spare parts and other components locally becomes more economical than transporting them from elsewhere. As Samuel Butler has pointed out in Erewhon, replication of partially closed universal machine tool factories is already possible. Since safety is a primary goal of all legislative consideration of regulation of such development, future development efforts may be limited to systems which lack either control, matter, or energy closure. Fully capable machine replicators are most useful for developing resources in dangerous environments which are not easily reached by existing transportation systems (such as outer space).
An artificial replicator can be considered to be a form of
In fiction
Authors who have used self-replicating machine in works of fiction include:
Other sources
- A number of patents have been granted for self-replicating machine concepts.[61] U.S. patent 5,659,477 "Self reproducing fundamental fabricating machines (F-Units)" Inventor: Collins; Charles M. (Burke, Va.) (August 1997), U.S. patent 5,764,518 " Self reproducing fundamental fabricating machine system" Inventor: Collins; Charles M. (Burke, Va.)(June 1998); and Collins' PCT patent WO 96/20453:[62] "Method and system for self-replicating manufacturing stations" Inventors: Merkle; Ralph C. (Sunnyvale, Calif.), Parker; Eric G. (Wylie, Tex.), Skidmore; George D. (Plano, Tex.) (January 2003).
- Macroscopic replicators are mentioned briefly in the fourth chapter of K. Eric Drexler's 1986 book Engines of Creation.[10]
- In 1995, Nick Szabo proposed a challenge to build a macroscale replicator from Lego robot kits and similar basic parts.[63] Szabo wrote that this approach was easier than previous proposals for macroscale replicators, but successfully predicted that even this method would not lead to a macroscale replicator within ten years.
- In 2004, Robert Freitas and Ralph Merkle published the first comprehensive review of the field of self-replication (from which much of the material in this article is derived, with permission of the authors), in their book Kinematic Self-Replicating Machines, which includes 3000+ literature references.[6] This book included a new molecular assembler design,[64] a primer on the mathematics of replication,[65] and the first comprehensive analysis of the entire replicator design space.[66]
See also
- Autopoiesis
- Grey goo scenario
- Self-reconfiguring modular robot
- AI takeover
- 3D printing
- Computer virus
- Computer worm
- Ecophagy
- Existential risk from advanced artificial intelligence
- Astrochicken
- Lights out (manufacturing)
- Nanorobotics
- Spiegelman's Monster
- Self-replicating spacecraft
- RepRap project
- Self-reconfiguring and self-reproducing molecube robots
- Quine
References
- ^ ISBN 978-3-030-48234-3, retrieved 2024-04-06
- ^ ISSN 0261-3077. Retrieved 2024-04-06.
- ISSN 0170-8406. Retrieved 2024-04-06.
- ISBN 978-3-86568-743-2. (128 pages)
- ISBN 978-3-658-12941-5. (272+4 pages)
- ^ ISBN 978-1-57059-690-2.
- ^ "3.11 Freitas Interstellar Probe Replicator (1979-1980)". Molecularassembler.com. 2005-08-01. Retrieved 2009-09-16.
- ^ ISBN 978-90-481-5103-5
- ^ S2CID 205070101
- ^ a b Drexler, K. Eric (1986). "Engines of Abundance (Chapter 4) Clanking Replicators". Engines of Creation. Archived from the original on 2011-08-07. Retrieved 2007-02-19.
- ^ Colvin 1947, pp. 6–7.
- PMID 11478000. Several other variations on this anecdotal response also exist.
- ^ Robert A. Freitas Jr.; Ralph C. Merkle (2004). Kinematic Self-Replicating Machines. Landes Bioscience. p. 5.
- ^ Samuel Butler. "Erewhon, Chapter 24, The book Of the Machines". Nzetc.org. Retrieved 2009-09-16.
- ^ George Eliot. "Impressions of Theophrastus Such, Chapter 17, Shadows of the Coming Race". online-literature.com. Retrieved 2017-08-25.
- ^ Robert A. Freitas Jr.; Ralph C. Merkle (2004). Kinematic Self-Replicating Machines. Landes Bioscience. p. 11.
- S2CID 205023396.
- ^ Bernal, John Desmond (1929). "The World, the Flesh and the Devil: An Enquiry into the Future of the Three Enemies of the Rational Soul".
- ^ Robert A. Freitas Jr.; Ralph C. Merkle (2004). Kinematic Self-Replicating Machines. Landes Bioscience. p. 14.
- ^ Lionel Penrose: Self-reproducing machines, Scientific American, vol 200, June 1959, pp 105-114
- ^ "Go Forth and Replicate". Scientific American. 2008-02-01. Retrieved 2021-03-13.
- ^ a b von Neumann, John; Burks, Arthur W. (1966), Theory of Self-Reproducing Automata. (Scanned book online), University of Illinois Press, retrieved 2017-02-28
- ^ "2.1 Von Neumann's Contributions". Molecularassembler.com. Retrieved 2009-09-16.
- ^ "2.1.3 The Cellular Automaton (CA) Model of Machine Replication". Molecularassembler.com. Retrieved 2009-09-16.
- .
- .
- ^ "3.1 Moore Artificial Living Plants (1956)". Molecularassembler.com. Retrieved 2009-09-16.
- ^ Freeman J. Dyson (1970-02-26). The twenty-first century (Speech). Vanuxem Lecture. Princeton University.
- ^ "3.6 Dyson Terraforming Replicators (1970, 1979)". Molecularassembler.com. 2005-08-01. Retrieved 2009-09-16.
- ^ Dyson, Freeman J. (1979). "Chapter 18: Thought Experiments". Disturbing the Universe. New York: Harper and Row. pp. 194–204.
- ^ Robert Freitas, William P. Gilbreath, ed. (1982). Advanced Automation for Space Missions. NASA Conference Publication CP-2255 (N83-15348).
- ^ Toth-Fejel, Tihamer (2004). "Modeling Kinematic Cellular Automata: An Approach to Self-Replication". NASA Institute for Advanced Concepts.
- .
- ^ Lackner, Klaus S., and Wendt, Christopher H., "Self-reproducing machine systems for global scale projects," Document LA-UR-93-2886, 4th International Conference and Exposition on Engineering, Construction and Operations in Space/Conference and Exposition/Demonstrations on Robotic for Challenging Environments, Albuquerque, New Mexico, 26 February – 3 March 1994
- ^ "3.15". Molecularassembler.com. 2005-08-01. Retrieved 2009-09-16.
- ^ Bass, Thomas (October 1995). "Robot, build thyself". Discover: 64–72.
- ^ Lipson, Hod; Evan Malone. "Autonomous Self-Extending Machines for Accelerating Space Exploration" (PDF). Retrieved 2007-01-04.
- ^ Chirikjian, Gregory S. (2004-04-26). "An Architecture for Self-Replicating Lunar Factories" (PDF). Retrieved 2007-01-04.
- ^ Todd, Paul (2004-04-30). "Final Progress Report on Robotic Lunar Ecopoiesis Test Bed" (PDF). Retrieved 2007-01-04. (phase I report)
- ^ Todd, Paul (2006-07-06). "Robotic Lunar Ecopoiesis Test Bed" (PDF). Retrieved 2007-01-04. (phase II report)
- ^ Toth-Fejel, Tihamer; Robert Freitas; Matt Moses (2004-04-30). "Modeling Kinematic Cellular Automata" (PDF). Retrieved 2007-01-04.
- ^ "3.25.4 Toth-Fejel Kinematic Cellular Automata (2003-2004)". Molecularassembler.com. Retrieved 2009-09-16.
- S2CID 53336745.
- National Archives.
- ^ Wernick, Adam (2015-01-15). "Exciting new ideas in space technology are getting short-changed by Congress". PRI.org. Retrieved 2016-12-09.
- S2CID 118612272.
- ^ "Self-Replication Process Holds Promise for Production of New Materials". Science Daily. 2011-10-17. Retrieved 2011-10-14.
- PMID 21993758.
- doi:10.3390/e3040273.
- ^ Harris, Zellig (1968). Mathematical Structures of Language. New York, NY: John Wiley and Son. p. 17.
- S2CID 35182224.
- PMID 26236228.
- ^ "Team builds first living robots—that can reproduce". 2021-11-29.
- ^ "3.11". Molecularassembler.com. 2005-08-01. Retrieved 2009-09-16.
- ^ Arbib, Michael A. (1974). "Interstellar Communication: Scientific Perspectives". In Cyril Ponnamperuma, A. G. W. Cameron (ed.). The Likelihood of the Evolution of Communicating Intelligences on Other Planets. Boston: Houghton Mifflin Company. pp. 59–78.
- Bibcode:1980JBIS...33..251F. Retrieved 2008-10-01.
- ^ "3.7 Self-Replicating Automated Industrial Factory (1973-present)". Molecularassembler.com. 2005-08-01. Retrieved 2009-09-16.
- ^ "5.6 Closure Theory and Closure Engineering". Molecularassembler.com. 2005-08-01. Retrieved 2009-09-16.
- ^ "5.1.9.L Evolvability". Molecularassembler.com. 2005-08-01. Retrieved 2009-09-16.
- ^ "5.11 Replicators and Public Safety". Molecularassembler.com. Retrieved 2009-09-16.
- ^ "3.16 The Collins Patents on Reproductive Mechanics (1997-1998)". Molecularassembler.com. 2005-08-01. Retrieved 2009-09-16.
- ^ WIPO. "(WO/1996/020453) SELF REPRODUCING FUNDAMENTAL FABRICATING MACHINES (F-UNITS)". Wipo.int. Archived from the original on 2019-11-01. Retrieved 2009-09-16.
- ^ Szabo, Nick. "Macroscale Replicator". Archived from the original on 2006-03-07. Retrieved 2007-03-07.
- ^ "4.11.3 Merkle-Freitas Hydrocarbon Molecular Assembler (2000-2003)". Molecularassembler.com. 2005-08-01. Retrieved 2009-09-16.
- ^ "5.9 Brief Mathematical Primer on Self-Replicating Systems". Molecularassembler.com. 2005-08-01. Retrieved 2009-09-16.
- ^ "5.1.9 Freitas-Merkle Map of the Kinematic Replicator Design Space (2003-2004)". Molecularassembler.com. 2005-08-01. Retrieved 2009-09-16.
Further reading
- ISBN 978-0-917914-86-7). Foreword by Ralph Flanders.
- M. Sipper, Fifty years of research on self-replication: An overview, Artificial Life, vol. 4, no. 3, pp. 237–257, Summer 1998.
- Freeman Dyson expanded upon Neumann's automata theories, and advanced a biotechnology-inspired theory. See Astrochicken.
- The first technical design study of a self-replicating interstellar probe was published in a 1980 paper by Robert Freitas.
- Clanking replicators are also mentioned briefly in the fourth chapter of K. Eric Drexler's 1986 book Engines of Creation.
- Article about a proposed clanking replicator system to be used for developing Earthly deserts in the October 1995 Discover Magazine, featuring forests of solar panels that powered desalination equipment to irrigate the land.
- In 1995, Nick Szabo proposed a challenge to build a macroscale replicator from Lego(tm) robot kits and similar basic parts. Szabo wrote that this approach was easier than previous proposals for macroscale replicators, but successfully predicted that even this method would not lead to a macroscale replicator within ten years.
- In 1998, fluidic logic. Power for the process could be supplied by a pressurized source of the liquid.
- In 2001, Peter Ward mentioned an escaped clanking replicator destroying the human race in his book Future Evolution.
- In 2004, General Dynamics completed a study for NASA's Institute for Advanced Concepts. It concluded that complexity of the development was equal to that of a Pentium 4, and promoted a design based on cellular automata.
- In 2004, Robert Freitas and Ralph Merkle published the first comprehensive review of the field of self-replication, in their book Kinematic Self-Replicating Machines, which includes 3000+ literature references.
- In 2005, GNU GPL. [1]
- In 2015, advances in memristors.
The power source might be