Silver nitride

Source: Wikipedia, the free encyclopedia.
Silver nitride
Names
IUPAC name
Silver(I) nitride
Other names
Fulminating silver
Argentous nitride
Identifiers
3D model (
JSmol
)
ChemSpider
  • InChI=1S/3Ag.N/q3*+1;-3 checkY
    Key: XSNQEMWVLMRPFR-UHFFFAOYSA-N checkY
  • InChI=1/3Ag.N/q3*+1;-3
    Key: XSNQEMWVLMRPFR-UHFFFAOYAP
  • [Ag+].[Ag+].[Ag+].[N-3]
Properties
Ag3N
Molar mass 337.62
Appearance Black solid
Density 9 g/cm3
Boiling point Explodes at 165 °C
Slightly
Solubility Decomposes in acids
Structure
face centered cubic
Thermochemistry
Std enthalpy of
formation
(ΔfH⦵298)
 199.1 kJ/mol[1] [verification needed]
314.4 kJ/mol[2]
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
 Explosive
Flash point Flammable
Safety data sheet (SDS) [1]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Silver nitride is an

endothermic
compound which decomposes explosively to metallic silver and nitrogen gas.

History

Silver nitride was formerly referred to as fulminating silver, but this can cause confusion with silver fulminate or silver azide, other compounds which have also been referred to by this name. The fulminate and azide compounds do not form from ammoniacal solutions of Ag2O.[2] Fulminating silver was first prepared in 1788 by the French chemist Claude Louis Berthollet.[5]

Properties

Silver nitride is poorly soluble in water, but decomposes in mineral acids; decomposition is explosive in concentrated acids. It also slowly decomposes in air at room temperature and explodes upon heating to 165 °C.[6]

Hazards

Silver nitride is often produced inadvertently during experiments involving silver compounds and ammonia, leading to surprise detonations. Whether silver nitride is formed depends on the concentration of ammonia in the solution. Silver oxide in 1.52 M ammonia solution readily converts to the nitride, while silver oxide in 0.76 M solution does not form nitride.[2] Silver oxide can also react with dry ammonia to form Ag3N. Silver nitride is more dangerous when dry; dry silver nitride is a contact explosive which may detonate from the slightest touch, even a falling water droplet.[2] It is also explosive when wet, although less so, and explosions do not propagate well in wet deposits of the compound. Because of its long-term instability, undetonated deposits of Ag3N will lose their sensitivity over time.

Silver nitride may appear as black crystals, grains, crusts, or mirrorlike deposits on container walls. Suspected deposits may be dissolved by adding dilute ammonia or concentrated ammonium carbonate solution, removing the explosion hazard.[3][7]

Other uses of the term

The name "silver nitride" is sometimes also used to describe a reflective coating consisting of alternating thin layers of silver metal and silicon nitride. This material is not explosive, and is not a true silver nitride. It is used to coat mirrors and shotguns.[8][9]

See also

References

  1. ^ "silver nitride". Chemister.
  2. ^
    doi:10.1021/ie00059a023
    .
  3. ^
    doi:10.1021/ed068pA6
    .
  4. ^ "Silver Nitrate" (PDF). Archived from the original (PDF) on March 3, 2016. Retrieved February 11, 2010.
  5. ^ See:
    • Berthollet (1788) "Procéde pour rendre la chaux d'argent fulminante" (Procedure for making fulminating silver chalk), Observations sur la physique … , 32 : 474–475.
    • Davis, Tenney L., The Chemistry of Powder And Explosives (Las Vegas, Nevada: Angriff Press, 1998), p. 401. (Originally published in 1941 and 1943 by Wiley of New York, New York.)
  6. ISBN 978-3-13-179211-2
    .
  7. ^ "Silver oxide". Retrieved February 11, 2010.
  8. ^ "Silicon nitride protective coatings for silvered glass mirrors". Retrieved February 11, 2010.
  9. ^ "Browning Shotguns". Retrieved February 11, 2010.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Silver_nitride&oldid=1145144009"