Spill containment
This article needs additional citations for verification. (March 2009) |
Spill containment is where spills of chemicals, oils, sewage etc. are contained within a barrier or
The National Response Center (NRC)[1] reports over 10,000 annual spills in the US from facilities. All of these can employ the spill containment measures mentioned above.
Regulation
In the United States, the Environmental Protection Agency (EPA) regulates the preparations and response to oil spills in inland waters, with the United States Coast Guard responding to spills in coastal waters.[3] The EPA oil spill program is further broken down into two segments with different responsibilities. The Spill Prevention, Control, and Countermeasure works with facilities that may leak oil into local rivers, streams, or other bodies of water to prevent said leakage. The Facility Response Plan requires at-risk facilities to have a plan to follow in the event of an oil spill. Both were created to plug holes left in the Clean Water Act, in an amendment called the Oil Pollution Act of 1990.
Advantages
Spill containment is considered by some to be a more eco-friendly solution than using absorbent spill kits that have very small capacity, require disposal after use and do not permit re-cycling of the spilled agent. Chemical handling and oil transfer companies in the UK are now deploying spill containment bladders and valves that can be retro-fitted to existing drainage systems in just a few hours. Installing spill containment measures prior to a spill can result in significant savings in the event of a spill. Cleanup costs are impacted by numerous factors such as location of the spill, type of oil spilled, surrounding sensitive areas, and local regulations.[4] For example, the average cost of cleanup (per ton) after an oil spill is drastically different for a spill in the Gulf of Mexico than it would be in South American waters, where there is a difference of almost $70,000.[4] Instead of paying for a costly cleanup, containment measures reduce the impact on the environment and the surrounding area, and may save some of the resource.
Technology
Before and after an oil spill, technology is used for many purposes.
- Prior to spills, important resources and at-threat areas can be mapped out[5]
- Maps, weather forecasts, and current ocean currents can be used to predict the possible paths of contaminant[5]
- First responders can use software to quickly evaluate which response options may best suit the situation[5]
Remote control of the inflation process is also available eliminating risk to operatives in the event of hazardous chemical spills. Normally controls are pneumatic eliminating the need to run
The latest technology in wireless spill containment eliminates any infrastructure changes using a wireless network (Zigbee) which inflates bladders that employ disposable gas cylinders. The wireless plugs[6] enable spill containment in virtually any location. Using the Zigbee network enables the user to connect any type of component to the wireless system such as sensors, fire alarms, panic buttons, remote controls etc.
Drains of all sizes can be fitted with systems available with extension brackets that cater for drain depths from 500 mm to over 2.5m deep. There are also
While many technologies are aimed towards preventing oil spills or towards preparation for the spills, there is also technology available that can be quickly implemented in the event of a spill. As was the case with the Deepwater Horizon oil spill in 2010, it may take a very long time for spills to be contained.
After using containment booms,
References
- ^ [1], National Response Center.
- ^ a b "Spills and Accidental Releases". American Petroleum Institute. Retrieved 23 October 2015.
- ^ "Oil Spills Prevention and Preparedness Regulations". United States Environmental Protection Agency. 20 May 2013. Retrieved 23 October 2015.
- ^ a b Schmidt Etkin, Dagmar. "Estimating Clean-Up Costs for Oil Spills" (PDF). The Banning Informer. Retrieved 2015-11-24.
- ^ a b c "Oil and Chemical Spills/Oil Spills/Response Tools". response.restoration.noaa.gov. Retrieved 2015-12-11.
- ^ [2], Chemigreen.