Transducer

Source: Wikipedia, the free encyclopedia.
This article is about an engineering device. For the similarly named concept in computer science, see Finite-state transducer.
Not to be confused with Transductor.

A transducer is a device that converts energy from one form to another. Usually a transducer converts a signal in one form of energy to a signal in another.[1] Transducers are often employed at the boundaries of

form of energy to another is known as transduction.[2]

Types

Mechanical transducer
  • Mechanical transducers, so-called as they convert physical quantities into mechanical outputs or vice versa;
  • Electrical transducers however convert physical quantities into electrical outputs or signals. Examples of these are:

Sensors, actuators and transceivers

Transducers can be categorized by which direction information passes through them:

  • A sensor is a transducer that receives and responds to a signal or stimulus from a physical system.[3][4][2] It produces a signal, which represents information about the system, which is used by some type of telemetry, information or control system.
  • An actuator is a device that is responsible for moving or controlling a mechanism or system. It is controlled by a signal from a control system or manual control. It is operated by a source of energy, which can be mechanical force, electrical current, hydraulic fluid pressure, or pneumatic pressure, and converts that energy into motion. An actuator is the mechanism by which a control system acts upon an environment. The control system can be simple (a fixed mechanical or electrical system), software-based (e.g. a printer driver, robot control system), a human, or any other input.[2]
  • Bidirectional transducers can convert physical phenomena to electrical signals and electrical signals into physical phenomena. An example of an inherently bidirectional transducer is an
    dynamic microphones to translate sound waves into an audio signal.[2]
  • Transceivers integrate simultaneous bidirectional functionality. The most ubiquitous example are likely radio transceivers (in aircraft called transponders), used in virtually every form of wireless (tele-)communications and network device connections. Another example are ultrasound transceivers that are used for instance in medical ultrasound (echo) scans.

Active vs passive transducers

Passive transducers require an external power source to operate, which is called an excitation signal. The signal is modulated by the sensor to produce an output signal. For example, a

resistance can be measured by detecting variations in the current or voltage across the thermistor.[5][2]

Active transducers in contrast, generate electric current in response to an external stimulus which serves as the output signal without the need of an additional energy source. Such examples are a photodiode, and a piezoelectric sensor, photovoltic, thermocouple.[5]

Characteristics

Some specifications that are used to rate transducers:

  • Dynamic range: This is the ratio between the largest amplitude signal and the smallest amplitude signal the transducer can effectively translate.[2] Transducers with larger dynamic range are more "sensitive" and precise.
  • Repeatability: This is the ability of the transducer to produce an identical output when stimulated by the same input.
  • electrical noise
    due to thermal motion of charges in circuits. Noise corrupts small signals more than large ones.
  • Hysteresis: This is a property in which the output of the transducer depends not only on its current input but its past input. For example, an actuator which uses a gear train may have some backlash, which means that if the direction of motion of the actuator reverses, there will be a dead zone before the output of the actuator reverses, caused by play between the gear teeth.

Applications

electronic signals, and vice versa. In this example, the first transducer could be a microphone, and the second transducer could be a speaker
.

Electromagnetic

Electrochemical

Electromechanical

Electromechanical input feeds meters and sensors, while electromechanical output devices are generically called actuators):

Electroacoustic

Electro-optical

Also known as photoelectric:

Electrostatic

Thermoelectric

  • Resistance temperature detectors
    (RTD) – converts temperature into an electrical resistance signal
  • Thermocouples – converts relative temperatures of metallic junctions to electrical voltage
  • Thermistors (includes PTC resistor and NTC resistor)

Radioacoustic

  • Geiger-Müller tubes – converts incident ionizing radiation to an electrical impulse signal
  • Radio receivers
    converts electromagnetic transmissions to electrical signals.
  • Radio transmitters
    converts electrical signals to electromagnetic transmissions.

See also

References

  1. ISBN 9780080506814
    .
  2. ^
    ISBN 978-0-240-82100-9
    .
  3. ^ Fraden J. (2016). Handbook of Modern Sensors: Physics, Designs, and Applications 5th ed. Springer. p.1
  4. ^ Kalantar-zadeh, K. (2013). Sensors: An Introductory Course 2013th Edition. Springer. p.1
  5. ^ a b Fraden J. (2016). Handbook of Modern Sensors: Physics, Designs, and Applications 5th ed. Springer. p.7

External links

Wikimedia Commons has media related to Transducers.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Transducer&oldid=1218277835"