Vinylcyclopropane rearrangement

The vinylcyclopropane rearrangement or vinylcyclopropane-cyclopentene rearrangement is a

Cyclopropyl groups adjacent to vinyl groups can undergo

Experimental and computational investigations show that mechanistically, the vinylcyclopropane rearrangement can be thought of as either a diradical-mediated two-step and/or orbital-symmetry-controlled pericyclic process. The amount by which each of the two mechanisms is operative is highly dependent on the substrate.

Due to its ability to form cyclopentene rings the vinylcyclopropane rearrangement has served several times as a key reaction in complex natural product synthesis.

Origins and history

In 1959, a young research chemist with

In particular the procedure described the reaction of 1,3-butadiene with carbenes generated from the action of base on chloroform or bromoform, which had been studied previously by Doering.^[7] Neureiter then took the resulting 1,1-dichloro-2,2-dimethylcyclopropane and under pyrolysis conditions (above 400 °C) discovered a rearrangement to 4,4-dichlorocyclopentene which today is considered to be the first thermal vinylcyclopropane-cyclopentene rearrangement in history.^[8]

The corresponding all-carbon version of the reaction was independently reported by Emanuel Vogel^[9] and Overberger & Borchert just one year after the Neureiter publication appeared.^[10][11] Doering, although interacting with Humble Oil and Refining - and therefore also with Neureiter - as a consultant, in a 1963 publication stated the following : "Credit for discovery that vinylcyclopropane rearranges to cyclopentene is due to Overberger and Borchert, and Vogel et al., who appear to have developed several examples of the rearrangement independently."^[12] The development of further vinylcyclopropane rearrangement variants didn't take long as demonstrated by Atkinson & Rees in 1967,^[13] Lwowski in 1968.^[14] and Paladini & Chuche in 1971.^[15]

The classical vinylcyclopropane rearrangement was discovered well after two of its heteroatom variants had already been reported. Although it is believed that the vinylcyclopropane rearrangement must have occurred during Nikolay Demyanov's preparation of vinylcyclopropane by Hofmann elimination at elevated temperatures in 1922,^[16] the cyclopropylimine-pyrroline rearrangement by Cloke in 1929^[17] and Wilson's cyclopropylcarbaldehyde-2,3-dihydrofuran rearrangement in 1947^[18] are really the only examples of vinylcyclopropane-like rearrangements.

This last reaction type is also known as the Cloke–Wilson Rearrangement ^[19]

Mechanism

The mechanistic discussion on whether the vinylcyclopropane rearrangement proceeds through a diradical-mediated two-step or a fully concerted orbital-symmetry-controlled mechanism has been going on for more than half a century. Kinetic data together with the secondary kinetic isotope effects observed at the vinyl terminus of the vinylcyclopropane suggest a concerted mechanism whereas product distribution indicates a stepwise-diradical mechanism.^[20] In the 1960s, shortly after the rearrangement was discovered, it was established that the activation energy for the vinylcyclopropane rearrangement is around 50 kcal/mol.^[21] The kinetic data obtained for this rearrangement were consistent with a concerted mechanism where cleavage of the cyclopropyl carbon-carbon bond was rate-limiting. Albeit a concerted mechanism seemed likely it was shortly recognized that the activation energy to break the carbon-carbon bond in unsubstituted cyclopropane was with 63 kcal/mol^[22] exactly 13 kcal/mol higher in energy than the parent activation energy, a difference remarkably similar to the resonance energy of the allyl radical.^[23] Immediately people started to appreciate the possibility for a diradical intermediate arising from homolytic cleavage of the weak C1-C2-cyclopropane bond under thermal conditions.

The discussion on whether the vinylcyclopropane rearrangement proceeds via a fully concerted or a two-step, non-concerted mechanism was given further careful consideration when Woodward and Hoffmann used the vinylcyclopropane rearrangement to exemplify [1,3]-sigmatropic concerted alkyl shifts in 1969.^[24] They hypothesized that if a concerted mechanism was operative the consequences of orbital-symmetry controlled factors would only allow the formation of certain products. According to their analysis of a vinylcyclopropane substituted with three R groups the antarafacial [1,3]-shift of bond 1,2 to C-5, with retention at C-2, leading to the ar cyclopentene and the suprafacial [1,3]-shift of bond 1,2 to C-5, with inversion at C-2, leading to cyclopentene si are symmetry allowed whereas the suprafacial [1,3]-shift of bond 1,2 to C-5, with retention at C-2, leading to cyclopentene sr and the antarafacial [1,3]-shift of bond 1,2 to C-5, with inversion at C-2, leading to the ai cyclopentene are symmetry-forbidden. It is important to note that Woodward and Hoffmann based their analysis solely on the principles of the conservation of orbital symmetry theory without however making any mechanistic or stereochemical prediction.

The attention directed towards the vinylcyclopropane rearrangement by Woodward and Hoffmann as a representative example for [1,3]-carbon shifts clearly enhanced the interest in this reaction. Furthermore, their analysis revealed potential experiments that would allow to distinguish between a concerted or stepwise mechanism. The stereochemical consequences of a concerted reaction pathway on the reaction outcome suggested an experiment where one would correlate the obtained reaction stereochemistry with the predicted reaction stereochemistry for a model substrate. Observing the formation of ai- and sr-cyclopentene products would support the notion that a stepwise, non-concerted mechanism is operative whereas their absence would point towards a fully concerted mechanism. As it turned out finding an appropriate substituted model substrate to study the stereochemical outcome of the vinylcyclopropane rearrangement was much more challenging than initially thought since side reaction such as the homodienyl

and more so thermal stereomutations tend to scramble stereochemical distinctions much faster than rearrangements lead to the cyclopentene products.

Even though deconvolution of the complex kinetic scenarios underlying these rearrangements was difficult there have been several studies reported where exact and explicit deconvolutions of kinetic and stereochemical raw data to account for the stereochemical contributions arising from competitive stereomutations was possible.^{[20][25][26][27]}

Thereby rate constants for all four stereochemically distinct pathways of the vinylcyclopropane rearrangement could be determined.

The data clearly indicated that the mechanistic preferences of the rearrangements are system dependent. Whereas trans-vinylcyclopropanes tend to form more of the symmetry-allowed ar- and si-cyclopentenes supportive of a concerted mechanism, the cis-vinylcyclopropanes preferentially yield the symmetry-forbidden ai- and sr- products suggesting a more stepwise, diradical mechanism. The influence of substituent effects on the reaction stereochemistry also becomes apparent from the data. Substituents with increased radical stabilizing ability not only lower the rearrangements activation energy but also reclosure of the initially formed diradical species becomes slower relative to the rate of cyclopentene formation resulting in an overall more concerted mechanism with less stereomutation (e.g. entry 6 & 7). In all cases though all the four products were formed indicating that both orbital-symmetry controlled pericyclic, as well as diradical-mediated two-step mechanisms are operative either way. The data is consistent with the formation of biradical species on a relatively flat potential energy surface allowing for restricted conformational flexibility before the products are formed. The amount of conformational flexibility and therefore conformational evolution accessible to the diradical species before forming product depends on the constitution of the potential energy surface. This notion is also supported by computational work.^[28] One transition state with a high diradicaloid character was found. Following the potential energy surface of the lowest energy path of the reaction it was found that a very shallow regime allows the diradical species to undergo conformational changes and stereoisomerization reactions with minor energetic consequences. Furthermore, it was shown that substituents can favor stereoselective pathways by destabilizing species that allow stereochemical scrambling.

Methodology development

Arguably the biggest drawback of the vinylcyclopropane rearrangement as a synthetic method is its intrinsically high activation barrier resulting in very high reaction temperatures (500-600 °C). Not only do these high temperatures allow side reactions with similar activation energies, such as homodienyl-[1,5]-hydrogen shifts, to occur but also do they significantly limit the functional groups tolerated in the substrates. It was well recognized by the chemical community that in order for this reaction to become a useful synthetic method, hopefully applicable in complex natural product settings at some point, some reaction development had to be done. It was found that the reaction temperature could be lowered drastically when the cyclopropane ring contained a dithiane group. Even though the dithiane-substituted vinylcyclopropane substrates required two synthetic steps starting from the corresponding 1,3-dienes the method proved itself successful for the synthesis of a variety of substituted cyclopentenes. The immediate rearrangement products could be easily converted to the corresponding cyclopentenones.^[29]

Methoxy-substituted vinylcyclopropanes show significantly faster reaction rates allowing the rearrangement to take place at 220 °C.^[30]

It was found that siloxyvinylcyclopropanes^[31] as well as the analogous sulfinylvinylcyclopropanes^[32] could be used as substrates to build annulated cyclopentene structures. Albeit these reactions still required reaction temperatures above 300 °C they were able to make useful products arising from the annulation of cyclopentene to a present ring system.

Vinylcyclopropane rearrangements can also be mediated photochemically.^[33][34] In a particularly intriguing example he was able to show that vinylcyclopropanes embedded within a cyclooctane core can be converted to the corresponding [5-5]-fused ring systems.

Vinylcyclopropane rearrangements are amenable to transition metal catalysts. [Dirhodium acetate]] catalyzes the rearrangements from room temperature to 80 °C.y^[35][36]

Analogous to the rate acceleration observed in the anionic-oxy-Cope rearrangement Danheiser reported a very similar effect for vinylcyclopropane substrates bearing [alkoxy] substituents.^[37]

Another intriguing result was reported by Larsen in 1988.

manner.

The methodology is allows the formation of various [5-5]- as well as [5-6]-carbon scaffolds.^[39]

Use in total synthesis

Five-membered carbon rings are ubiquitous structural motifs in natural products. In contrast to the larger, fully "consonant"

,

Trost's synthesis of aphidicolin (1979)

A synthesis of Aphidicolin use methodology around the vinylcyclopropane rearrangement developed in their own laboratory .^[40] A key step converts a late stage siloxyvinylcyclopropane into a cyclopentene that contained the [6-6-5]-fused carbon skeleton found within the natural product. The rearranged product into the natural product by further manipulations.

Piers' synthesis of zizaene (1979)

The synthesis of zizaene is another early example for the application of a vinylcyclopropane rearrangement as a key disconnection.^[41]

Hudlicky's synthesis of hirstuene (1980) and isocomene (1984)

The methodology has also been applied to the synthesis hirsutene^[42] and isocomene^[43]

Synthesis of alpha-Vetispirene

Cinylcyclopropane rearrangement has been used to build the

Synthesis of Antheridiogen-An

Antheridiogen-An was prepared using a Lewis-acid mediated late-stage vinylcyclopropane rearrangement.^[45]

Synthesis of biotin

Copper-catalyzed heteroatom-vinylcyclopropane rearrangement was used to form the

Synthesis of salviasperanol

An acid-mediated vinylcyclopropane rearrangement was used to synthesize the natural product salviasperanol.^[47]

See also

• Skattebøl rearrangement
• Di-π-methane rearrangement

References