Bulging factor

Bulging factor is an

pressurized fuselage structure. It is used in evaluating the damage tolerance of airframe fuselages.^[1]

The single curved geometry and pressure differential causes a

longitudinal crack to bulge out or protrude from the original shape. This change in geometry, or “bulging effect”, significantly increases the stress intensity factor at the crack tips. The effects of this loading

condition can trigger different types of failure mechanisms.

For the case of unstiffened shell structures, the bulging factor can be defined as the ratio of stress-intensity (SIF) of a curved shell to the stress-intensity factor of a flat panel:

$bulgingfactor=SIF(curved)/SIF(flat)$

The representation of this phenomenon becomes rather complex due to the

biaxial and internal pressure load and structural configuration.^[1]

References

^ ^a ^b United States of America. Federal Aviation Administration. Bulging Factor Solutions for Cracks in Longitudinal Lap Joints of Pressurized Aircraft Fuselages. Springfield, 2004. pp.1-3,10

Lazghab Tarek, Fayza Ayari, Lotfi Chelbi. Crack growth in cylindrical aluminum shells with inner reinforcing foam layer. Springer, 2006. pp. 151.

This engineering-related article is a stub. You can help Wikipedia by expanding it.

[America._Federal_Aviation_Administration_2004._pp.1-3-1] United States of America. Federal Aviation Administration. Bulging Factor Solutions for Cracks in Longitudinal Lap Joints of Pressurized Aircraft Fuselages. Springfield, 2004. pp.1-3,10

[1]