Copper John fly

Source: Wikipedia, the free encyclopedia.
Copper John fly
Artificial fly
Type
Nymph fly
ImitatesMayfly nymph
History
CreatorJohn Barr
Created1993
Materials
Typical sizes10–22
Typical hooksMustad 9671, TMC 5262, Dai-Riki 730 1x or 2x long shank with 2x heavy wire)
ThreadBlack 6/0 or 8/0
TailTwo brown goose or turkey biots
WingWing case: Thin Skin or turkey tail topped with 1 strand of Krystal Flash or two or three strands of Flashabou. Coat with epoxy.
RibbingBrassie-sized Ultra-Wire in copper or color of choice
ThoraxPeacock herl
LegsMottled partridge or hen saddle fibers
BeadGold-colored tungsten bead
Uses
Primary useTrout
Reference(s)
Pattern referencesBarr, John in Mid Current[1]

The Copper John is a

nymph type artificial fly used in fly fishing. It was created by John Barr of Boulder, Colorado in the 1990s. It is popular amongst fly tyers and numerous variations have been created. Use of a tungsten bead, wire, and sometimes lead makes this slim nymph fly drop fast in the water to the depths where the fish are located and is often fished in murky water. The Copper John is a general imitation of the nymph state of a Mayfly.[1][2][3]

Origin

The original Copper John fly was first tied by John Barr of Boulder in 1993. It underwent several variations until finalized in 1996.The original fly was tied with Turkey biots for the wing case and without epoxy over it. Later, as "Thin Skin" material and epoxy resins became available, they were substituted until the fly was finalized. The original was tied without a taper in the body but later changed to a slight taper using thread under the wire wrappings. The original was tied with copper wire and is now commonly tied using green, pink, blue, or other colored wires to match the size of the hook.[1][4]

Fishing

The relatively heavy weight and thin profile of this fly allows it to descend fast in the water. It is often used as a dropper fly in a hopper-dropper fly combination. It is particularly useful when used to fish for trout in discolored water. Smaller sizes of the fly are fished in the Fall and Spring and larger versions are fished in the summer when food is more available.[3]

References

  1. ^ a b c Barr, John. "Tying the Original Copper John". Mid Current. Retrieved March 22, 2021.
  2. ^ "Copper John". Evergreen Chapter of Trout Unlimited.
  3. ^ a b Hunt, Christopher. "The Copper John". Trout Unlimited. Retrieved March 22, 2021.
  4. ^ "How to tie the Copper John". Orvis News. Retrieved March 22, 2021.