Fault (technology)

In Engineering, a fault is a defect or problem in a system that causes it to fail or act abnormally.

The

ISO document 10303-226 defines fault as an abnormal condition or defect at the component, equipment, or sub-system level which may lead to a failure

.

The United States Glossary of Telecommunication Terms defines fault for telecommunications as:

An accidental condition that causes a
functional unit to fail to perform its required function. See § Random fault.[1]

A defect that causes a reproducible or catastrophic malfunction. A malfunction is considered reproducible if it occurs consistently under the same circumstances. See § Systematic fault.
In
Fault (power engineering)
.

Random fault

A random fault occurs as a result of wear or other deterioration.

Since deterioration progresses somewhat randomly, predicting when a particular unit will develop a fault is not possible. But the rate at which a particular fault occurs among a large number of units often can be predicted with significant accuracy.

Manufacturers often accept random faults as a risk if the chances are virtually negligible.

A fault can happen in virtually any object or appliance, most common with electronics and machinery.

For example, an Xbox 360 console will deteriorate over time due to dust buildup in the fans. This will cause the Xbox to overheat, cause an error, and shut the console down.

Systematic fault

A Systematic fault results from an error in design such that every copy has the same fault. Sometimes a systematic fault remains undetected for a long time even if many copies are in use. The fault might be triggered when conditions change and could fail in every copy at the same time.

Software can have faults, a.k.a. bugs, but since software cannot deteriorate, all faults are systematic.^{[citation needed]}

Random fault

Systematic fault

See also