Hammermill

Source: Wikipedia, the free encyclopedia.
This article is about the modern milling machine. For historical mills that used trip hammers, see Hammer mill.
For the paper manufacturer, see Hammermill Paper Company.
Hammer mill for milling grain

A hammer mill is a mill whose purpose is to shred or crush aggregate material into smaller pieces by the repeated blows of small hammers. These machines have numerous industrial applications, including:

  • Ethanol plants (grains)
  • A farm machine, which mills grain into coarse flour to be fed to livestock
  • Fluff pulp defiberizing
  • Fruit juice
    production
  • Grinding used shipping pallets for mulch
  • Milling grain
  • Livestock, poultry, and aquatic feed production
  • Sawmills, size reduction of trim scrap and planer shavings into boiler fuel or mulch
life sciences
laboratory
High speed industrial hammer mill for waste fragmentation
Slow speed horizontal pallet grinder

Operation

The basic principle is straightforward. A hammer mill is essentially a steel drum containing a vertical or horizontal rotating shaft or drum on which hammers are mounted. The hammers are free to swing on the ends of the cross, or fixed to the central rotor. The rotor is spun at a high speed inside the drum while material is fed into a feed hopper. The material is impacted by the hammer bars and is thereby shredded and expelled through screens in the drum of a selected size.

Hammer mill apple shredder for juicing.

The hammermill can be used as a primary, secondary, or tertiary crusher.

Small grain hammermills can be operated on household current. Large hammer mills used in automobile shredders may be driven by diesel or electric motors ranging from 2000 to over 5000 horsepower (1.5 - 3.7MW).

The screenless hammer mill uses air flow to separate small particles from larger ones. It is designed to be more reliable, and is also claimed to be much cheaper and more energy efficient than regular hammermills. The design & structure of the hammermill is always determined by the end use.

History

Water-powered trip hammer mills were created in 488 AD by the medieval Chinese mathematician and engineer Zu Chongzhi which was inspected by Emperor Wu of Southern Qi (r. 482–493 AD).[1][2][3] The water-powered trip hammer mills were powered by minor hill flowing stream that was connected to a large river beneath the high banks.[4]

Types of Hammer Mill Crushers

Types of Hammer Mill Crushers can include "up running" and "down running" hammer mills - [5]

  • "Up Running" - Uses perforated screens or grate bars to reduce soft or hard materials. The material to be reduced determines the rotor construction that can be adjustable based on wear.
  • "Down Running" - Most suitable for fibrous materials due to the high concentration of shearing action within the unit.

Based on the director of the motor the hammer mills are classified into the following types:

  • Reversible hammer mill
  • Non-reversible hammer mill

Although the mills are classified into the above two different types their working and grinding actions of both these types of mill are almost similar. However, their construction differs in various respects. [6]

See also

  • Blade grinder
  • Trip hammer, which may be housed in a mill usually known as a forge, but which was historically occasionally described as a “hammermill.”

References

  1. JSTOR 3177285
    .
  2. ISBN 978-0-521-05802-5
    .
  3. ISBN 9783662441664
    .
  4. ISBN 978-0521632621
    .
  5. ^ Company, Stedman Machine. "Up & Down Running Hammer Mill Manufacturer | Stedman Machine Company". www.stedman-machine.com. Retrieved 2018-10-17.
  6. ^ Karma, Ankit. "Hammer Mill: Types, Uses, Operating Principle, Components". Retrieved 2021-04-23.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Hammermill&oldid=1181003260"