IBM 7701

Source: Wikipedia, the free encyclopedia.

The IBM 7701 Magnetic Tape Transmission Terminal was a communications device announced by

magnetic tape
over a leased or dial telephone circuit.

The IBM 7702 was a similar device that could communicate at higher speeds.[1]

The 7701 was the first product introduced in conjunction with IBM's TELE-PROCESSING trademark.[2]

Technical details

The 7701 communicated using the Synchronous transmit-receive (STR) communications protocol over either private or switched (message service) telephone lines. It operated at speeds of either 75 or 150 characters per second (cps). The 7702 operated at speeds of either 150, 250, or 300 characters per second.[1]

The devices used a special incremental magnetic tape drive that was controlled by the STR communications unit. The drive used standard one half inch, seven track magnetic tape reels recorded at 200 bytes per inch (BPI). It moved the tape on demand in increments of .005 inches (0.13 mm) and was capable of reading data under the read/write head even when the tape was stationary. Either binary or

BCD
tapes could be processed.

The 7701 could communicate with a remote computer system or with another 7701 or 7702.

Dimensions

The 7701 was 58 inches (150 cm) high, 29 inches (74 cm) wide, and 31 inches (79 cm) deep.

References

  1. ^ a b IBM Corporation (1961). IBM 7702 Magnetic Tape Transmission Terminal (PDF). p. 00.
  2. .