LMS diesel shunter 1831

Source: Wikipedia, the free encyclopedia.

LMS 1831
6-cyl
TransmissionHaslam & Newton
Loco brakeAir brake (independent)
Train brakesVacuum brake
Performance figures
Maximum speed25 mph (40 km/h)
Power output400 hp (298 kW) at 750 rpm; later 300 hp (224 kW)
Tractive effort22,400 lbf (99.6 kN);
later 20,000 lbf (89.0 kN)
Career
OperatorsLondon, Midland and Scottish Railway
Numbers1831
DeliveredTesting: December 1932;
In stock: May 1934
WithdrawnSeptember 1939
DispositionRebuilt 1940 in to mobile power unit; scrapped August 1951

LMS diesel shunter No. 1831 was an experimental diesel hydraulic

shunter built by the London, Midland and Scottish Railway (LMS) in 1931/3, which pioneered diesel shunting
in the UK.

Design

It was ordered in 1931 from the Midland Railway's Derby Works and delivered in December 1932, nominally a rebuild of a Midland Railway 1377 Class 0-6-0T steam locomotive of the same number, built in September 1892 by the Vulcan Foundry.[1] The frames and running gear of the original locomotive were retained.[2] It had a Davey Paxman 6-cylinder 400 hp (298 kW) at 750 rpm engine (later converted to 300 hp (224 kW) and a Haslam & Newton transmission.

History

After initial testing, the locomotive entered stock in May 1934, but was not successful in ordinary service. The locomotive was put into storage in 1936 and officially withdrawn from service in September 1939. It was converted to a mobile power unit, emerging in its new guise as MPU3 in November 1940. It was scrapped in August 1951.[3]

References

  1. . p.[3].
  2. .p.23.
  3. ^ Strickland (1982), p.23.