Lakester
![photo of a drop tank on a P-51 mustang](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f6/Tuskeegee_babies_on_P-51.jpg/220px-Tuskeegee_babies_on_P-51.jpg)
A Lakester is a
History
During the late 1940s Bill Burke of the So-Cal Speed Shop built the first "Lakester" from a surplus aircraft drop tank. The idea of using a tank as an aerodynamic car body came to Burke when he saw some drop tanks on a barge being taken ashore at Guadalcanal.[1][2] Burke recalls thinking, "My god, what a beautiful piece of streamlining that is!" With a tape measure, Burke went aboard and measured one of the tanks.[1] He knew the dimensions of a Ford rear end and engine block, and he could see that the automotive components would fit.[1][2]
Production
After World War II, surplus tanks were sold for $35 or $40 apiece, and hundreds of them were stockpiled in surplus yards.[1] Burke's first Lakester was created from a 168-gallon tank used on the P-51 Mustang.[1][2] However, with experience it was found that the 315-gallon tank used on the P-38 Lightning was more practical due to its greater size.[1][2] The tanks consisted of two halves bolted together, however since the top half had fuel openings and all the necessary hardware to fasten it to the aircraft, usually only two bottom halves were used to create a Lakester.[1]
Racing
The Lakester's first race appearance was at Bonneville Salt Flats. Even today, Lakesters can still be seen racing there.[1]
See also
References
- ^ ISBN 1599216795.
- ^ ISBN 1610591852.