Milford railway station (Wiltshire)

Add links
Coordinates: 51°03′58″N 1°47′02″W / 51.066°N 1.784°W / 51.066; -1.784
Source: Wikipedia, the free encyclopedia.

Milford railway station
Salisbury Milford signal box. The old station throat was where the van is in the background
General information
LocationSalisbury, Wiltshire
England
Coordinates51°03′58″N 1°47′02″W / 51.066°N 1.784°W / 51.066; -1.784
Grid referenceSU151296
Operated byLSWR
Platforms1
Other information
StatusClosed (demolished)
History
Original companyLSWR
Post-groupingSouthern Railway
Key dates
27 January 1847Opened to goods
1 March 1847Opened to passengers
2 May 1859Closed to passengers
21 August 1967Closed completely

Milford railway station was the first railway station to be built in the city of Salisbury, Wiltshire, England, in 1847. The Bishopstoke to Salisbury line approached from the south-east, and terminated in the Milford area of the city by the Church of St Martin. In 1859, passenger services were transferred away to the newer station located at Fisherton (now the main station in Salisbury), with Milford retained as a goods depot until the 1960s.

History

The station opened to traffic in 1847, when the London and South Western Railway's branch from Southampton and Bishopstoke was built into the east side of Salisbury.[1] Goods traffic started between Bishopstoke (Eastleigh) and Salisbury in January 1847, with passenger trains starting in March of the same year.[2] The railway's arrival resulted in terraced housing being built in the area around St Martin's Church for the railway workers.[3]

A journey to London took at least four hours with a change at Bishopstoke, until the direct line to London was opened through Andover and Basingstoke in May 1857.[4] This, too, terminated at the Milford station site, which had only one platform.[5][6] The site at Milford was at the foot of a 1-in-150 gradient, which proved reasonably easy for shunting purposes, but expansion westwards to meet up with other projected railways in the city was complicated as the line would need to cross water meadows near the cathedral.[7] Similarly, the eastwards expansion of the railway across the city from the intended other railways approaching Salisbury from the west or north also proved difficult to achieve. Many who lived in Salisbury thought the newer station was in a less convenient position than Milford station, and that the downhill approach to the Milford terminus offered the best view of the cathedral and the city.[8] Additionally, direct traffic from London via Andover had to draw past Milford Junction facing towards Bishopstoke (Eastleigh), and reverse into the station.[9]

The buildings and wooden platform at Milford station were destroyed by fire on 27 March 1858. The combined length of the passenger shed, the bookstalls and refreshment rooms (350 feet (110 m)) were burnt out within one hour.[10] As the building of the new station had already started, the LSWR threw up a temporary station for the few months that Milford would continue in use as a passenger station.[11]

Upon the opening of Salisbury Tunnel, all passenger traffic was diverted to the newer station in the Fisherton area of the city from 2 May 1859, with the Milford site being retained as a goods depot.[12][13] The length of the line from Milford Junction was 25 chains (1,600 ft; 500 m) and the diversion northwards and westwards towards the new station was 2 miles 12 chains (3.5 km).[14]

Platform extensions and other buildings being sited at the Salisbury Fisherton station meant that the LSWR concentrated all its goods traffic at Milford.[15] The Railway Clearing House handbook of stations from 1904 states that the station could accept goods, livestock, furniture vans and horse boxes, and was equipped with a 10-tonne (11-ton) crane.[16] By the 1940s, the goods station at Milford was still busy with livestock traffic, especially on Tuesdays, the market day.[17] It had sixteen sidings, a headshunt parallel to Milford Junction, a weighbridge and a goods shed. The longest siding (known as "Cross on the Straight"), was 1,100 feet (340 m) long.[18]

After nationalization, the site was allocated to the Western Region, but the boundaries were re-drawn in 1950, and the Salisbury area including Milford goods was transferred to the Southern Region of British Rail.[19] The site was used until August 1967, then was demolished and cleared in 1968.[20][21][22]

References

  1. ^ Historic England. "Former GWR station (Grade II) (1242134)". National Heritage List for England. Retrieved 18 December 2023.
  2. ISBN 0711017808
    .
  3. ^ "Milford Hill Conservation Area Appraisal and Management Plan" (PDF). cms.wiltshire.gov.uk/. July 2013. p. 6. Retrieved 18 December 2023.
  4. ISBN 0-7153-4188-X
    .
  5. ISBN 185260297X
    .
  6. ISBN 1852600497
    .
  7. ISBN 978-1-905505-42-5
    .
  8. ISSN 0033-8923
    .
  9. ISBN 0-906520-67-3
    .
  10. ISBN 0-7153-4188-X
    .
  11. ISSN 0033-8923
    .
  12. OL 11956311M
    .
  13. ISBN 978-1-52678-088-1
    .
  14. ISBN 978-0-7110-3857-8
    .
  15. ISSN 0033-8923
    .
  16. ISBN 0715351206
    .
  17. ISBN 978-1-905505-42-5
    .
  18. ISBN 0-906520-67-3
    .
  19. ISSN 0033-8923
    .
  20. ISBN 0-86093-542-6
    .
  21. ^ Morrison, T. "Milford Goods Yard". milfordstreetbridgeproject.org.uk. Retrieved 21 December 2023.
  22. ISBN 0-906520-67-3
    .

External links
Retrieved from "https://en.wikipedia.org/w/index.php?title=Milford_railway_station_(Wiltshire)&oldid=1203874866"