Sarsden Halt railway station

Sarsden Halt was an unstaffed railway station on the Banbury and Cheltenham Direct Railway.

History

When the Chipping Norton Railway from

The name is interesting since the location is more than a mile from the hamlet of Sarsden and much closer to the village of Churchill. The reason for the name is unknown, but the following factors may have had a bearing.

Firstly, James Haughton Langston MP of Sarsden House was one of the promoters of the railway and owned much of the land on which it was built. Much of the traffic to the siding would be destined for his estate, which included the village of Churchill. In 1852 James Haughton Langston had earlier tried to obtain a railway siding on the OW&W Railway, as recorded in that company's Traffic Committee minutes for 20 November:

A letter was read from Mr. Varden relative to a siding near Sarsden. Resolved that Mr. Lewis and Mr. Busby with the Superintendent call upon Mr. Langston and ascertain the amount of traffic likely to be put upon the line to and from the point where the siding is required.

The proposed siding on the main line was not built.

Secondly the OW&WR already had a station at Churchill near Kidderminster (later Churchill & Blakedown, now Blakedown). The need to avoid wagons and passengers being routed to the wrong destination would suggest the use of a name other than the obvious geographic name Churchill.

The siding was a loop and about 480 feet long. The loop's points were unlocked by a key on the train staff.

A level crossing carried the road from Churchill to Churchill Mill. Initially this was not regarded as a public crossing as it served only the mill yard. Later hand-operated gates were provided.

In 1883 work began on the building of the Kingham Hill Homes (now Kingham Hill School), one mile to the North-West. Kingham Station was not equipped for the handling of goods traffic so supplies for the school, including coal and provisions, were consigned to Sarsden Siding. Horse-drawn vehicles from the school accessed the siding via the mill yard. Access was liable to be prevented, for example when the miller was operating a threshing machine in the yard. Because of these problems Churchill Mill was purchased by the school and road traffic between the school and Churchill now passed over the level crossing. The price paid by the school to purchase the mill was considerably in excess of the market value and can only be explained by the importance placed on gaining unrestricted road access to Sarsden Siding.

In 1893 a

The Great Western Railway, which had taken over the Chipping Norton Railway, opened the passenger halt on 2 July 1906. It was a standard Great Western design with one timber platform and "pagoda" shelter. The designation "Halt" means it was unstaffed and tickets were purchased on the train. A cart weighbridge was built in 1913 and a crossing-keeper's house in 1930.

On 1 December 1962

Goods traffic

Sarsden Siding had a curious status. It was not a private siding yet neither was it public in the sense that small consignments of goods could be sent and received there. Traffic seems to have been handled in full wagonloads only. Despite this, the siding was well used handling mainly agricultural traffic including milk. Coal was also delivered. Exact traffic figures are not available as the totals were counted in with Chipping Norton.

Passenger traffic

Again detailed figures are not available. Most trains on the line called at the Halt, which was used by passengers from the village of Churchill and from Kingham Hill School. One train that did not usually stop was the daily Ports to Ports Express between Newcastle and South Wales, but even this would call at the Halt to set down passengers from beyond Leicester if 24 hours' notice was given.^[2]

Present-day remains.

The crossing-keepers house is the only building now remaining. The small group of houses at Churchill Mill is nowadays known as "Sarsden Halt". The wooden timetable board has been preserved and can be seen at Winchcombe Railway Museum. One of the platform oil lamps, a signal lamp and a wheel off the sack truck have been privately preserved. The Sarsden Halt nameboard and signal box nameplate are not thought to have survived.

Notes