Technical standard
A technical standard is an established norm or requirement for a repeatable technical task which is applied to a common and repeated use of rules, conditions, guidelines or characteristics for products or related processes and production methods, and related management systems practices. A technical standard includes definition of terms; classification of components; delineation of procedures; specification of dimensions, materials, performance, designs, or operations; measurement of quality and quantity in describing materials, processes, products, systems, services, or practices; test methods and sampling procedures; or descriptions of fit and measurements of size or strength.[1]
It is usually a formal document that establishes uniform engineering or technical criteria, methods, processes, and practices. In contrast, a custom, convention, company product, corporate standard, and so forth that becomes generally accepted and dominant is often called a de facto standard.
A technical standard may be developed privately or
The standardization process may be by edict or may involve the formal consensus[2] of technical experts.
Types
The primary types of technical standards are:
- A standard For example, there may be a specification for a turbine blade for a jet engine that defines the exact material and performance requirements.
- A standard test method describes a definitive procedure that produces a test result. It may involve making a careful personal observation or conducting a highly technical measurement. For example, a physical property of a material is often affected by the precise method of testing: any reference to the property should therefore reference the test method used.
- A standard practice or procedure gives a set of instructions for performing operations or functions. For example, there are detailed standard operating procedures for operation of a nuclear power plant.[4]
- A standard guide is general information or options that do not require a specific course of action.
- A standard definition is formally established terminology.
- Standard units, in physics and applied mathematics, are commonly accepted measurements of physical quantities.
Definitions
Technical standards are defined [5] as:
- Voluntary consensus standards, which are standards developed or adopted by voluntary consensus standards bodies, domestic (national), regional and international.
- Industry standards, also referred to as private standards, which are standards developed in the private sector but not in the full consensus process, typically requiring a financial contribution. UNIDO define private standards as three categories; Consortia standards, Civil society standards and Company-specific standards.[6]
- Government standards, which are standards developed by the government for its own uses.
Availability
Technical standards may exist as:
- Public documents on the internet, public library, etc. (Some technical standards may be found at a major central library or at the library of a good technical university)
- Published documents available for purchase
- Private documents owned by an organization or corporation, used and circulated as the owner determines necessary or useful
- Documents publicly available under intellectual property (copyright, etc.)[7]
- Closed or controlled documents that contain trade secrets or classified information
Geographic levels
When a geographically defined community must solve a community-wide
- National standard: by National standards organizations. For example, Telecommunications Industry Associationstandards.
- Regional standard: see standards of the Regional standards organizations. For example, CENstandards.
- International standards organizations Example, ISO and ASTM International.
National/Regional/International standards is one way of overcoming technical barriers in inter-local or inter-regional commerce caused by differences among technical regulations and standards developed independently and separately by each local, local
Usage
The existence of a published standard does not imply that it is always useful or correct. For example, if an item complies with a certain standard, there is not necessarily assurance that it is fit for any particular use. The people who use the item or service (engineers, trade unions, etc.) or specify it (building codes, government, industry, etc.) have the responsibility to consider the available standards, specify the correct one, enforce compliance, and use the item correctly.
Standards often get reviewed, revised and updated on a regular basis. It is critical that the most current version of a published standard be used or referenced. The originator or standard writing body often has the current versions listed on its web site.
In
Examples:
Parties | Mutual gains | Problem | Solution |
---|---|---|---|
Mechanical industry companies | Suppliers interchange, stock gains, etc. | Screw thread compatibility | Screw thread standard specifications |
Pharmaceutical industry and medic community | Enable medical prescriptions, suppliers interchange, etc. | Drug uniformity
|
Drug standard specifications
|
Banks and specialized payment cards companies
|
Enable Credit card holder to pay a merchant for goods and services | Credit card uniformity | Technical specifications
|
Private Standards (consortia)
Private standards are developed by private entities such as companies,
The
In 2020, Fairtrade International, and in 2021, Programme for the Endorsement of Forest Certification (PEFC) issued position statements[21][22] defending their use of private standards in response to reports from The Institute for Multi-Stakeholder Initiative Integrity (MSI Integrity)[23] and Greenpeace.[24]
Private standards typically require a financial contribution in terms of an annual fee from the organizations who adopt the standard. Corporations are encouraged to join the board of governance of the standard owner[25] which enables reciprocity. Meaning corporations have permission to exert influence over the requirements in the standard, and in return the same corporations promote the standards in their supply chains which generates revenue and profit for the standard owner. Financial incentives with private standards can result in a perverse incentive, where some private standards are created solely with the intent of generating money. BRCGS, as scheme owner of private standards, was acquired in 2016 by LGC Ltd who were owned by private equity company Kohlberg Kravis Roberts.[26] This acquisition triggered substantial increases in BRCGS annual fees.[27] In 2019, LGC Ltd was sold to private equity companies Cinven and Astorg.[28]
See also
- De facto standard
- Harmonization (standards)
- International Standard
- International Organization for Standardization
- List of international common standards
- List of computer standards
- List of technical standard organisations
- Software standard
- Specification (technical standard)
- Standard (metrology)
- Standards organization
- Standardization
- World Standards Day
- World Standards Cooperation
References
- ^ "Developing Operational Requirements: A Guide to the Cost-Effective and Efficient Communication of Needs" (PDF). US Department of Homeland Security. November 2008. Archived (PDF) from the original on 8 October 2021. Retrieved 23 September 2021. This article incorporates text from this source, which is in the public domain.
- ^ Example of TAPPI standards development regulations
- ^ "Standard Specifications". Oregon.gov. Oregon.gov. Archived from the original on 22 April 2017. Retrieved 20 August 2015.
- ^ "Operational Limits and Conditions and Operating Procedures for Nuclear Power Plants Safety Guide". International Atomic Energy Association. IAEA. Archived from the original on 28 June 2018. Retrieved 20 August 2015.
- ^ "CIRCULAR NO. A-119 Revised" (PDF). whitehouse.gov. The White House. Archived (PDF) from the original on 19 December 2017. Retrieved 22 September 2021.
- ^ "Private standards". Unido.org. United Nations Industrial Development Organization. Archived from the original on 9 October 2021. Retrieved 20 September 2021.
- ^ Example: SAE International copyright policy Archived 2012-11-12 at the Wayback Machine
- ^ "Principles for the Development of International Standards, Guides and Recommendations". wto.org. World Trade Organization. Archived from the original on 25 October 2021. Retrieved 20 September 2021.
- ISBN 978-92-67-10518-5. Archivedfrom the original on 6 October 2021. Retrieved 26 September 2021.
- ^ "Part I The Impacts of Private Standards on Global Value Chains". intracen.org. International Trade Centre (ITC). Archived from the original on 2023-01-30. Retrieved 2023-02-22.
- ^ "Part II The Impacts of Private Standards on Producers in Developing Countries". intracen.org. International Trade Centre (ITC). Archived from the original on 2023-02-09. Retrieved 2023-02-22.
- ^ "Part III The Interplay of Public and Private Standards". intracen.org. International Trade Centre (ITC). Archived from the original on 2023-02-01. Retrieved 2023-02-22.
- ^ "Part IV When do Private Standards work?". intracen.org. International Trade Centre (ITC). Archived from the original on 2023-01-29. Retrieved 2023-02-22.
- ISBN 978-92-5-105779-7. Archivedfrom the original on 2021-09-29. Retrieved 2021-09-29.
- ISBN 978-92-5-106430-6. Archived(PDF) from the original on 2021-10-08. Retrieved 2021-09-29.
- ^ Private Food Safety Standards: Their Role in Food Safety Regulation and their Impact. Food and Agriculture Organization. 2010. Archived from the original on 2021-09-29. Retrieved 2021-09-29.
- ISBN 978-92-5-106730-7. Archivedfrom the original on 2021-09-29. Retrieved 2021-09-29.
- from the original on February 20, 2023. Retrieved February 20, 2023.
- from the original on 2023-05-30. Retrieved 2023-05-30.
- ^ Horlock, David. "Collaborate, innovate and accelerate; how standards build consensus and facilitate trade". bsigroup.com. BSI. Archived from the original on 2021-10-01. Retrieved 2021-10-01.
- ^ "Fit for purpose?". fairtrade.net. Fairtrade International. 2020. Archived from the original on 2021-10-17. Retrieved 2021-10-17.
- ^ "PEFC response to Greenpeace report "Destruction: Certified"". pefc.org. PEFC. 11 March 2021. Archived from the original on 17 October 2021. Retrieved 17 October 2021.
- ^ MSI Integrity, Not Fit-for-Purpose: The Grand Experiment of Multi-Stakeholder Initiatives in Corporate Accountability, Human Rights and Global Governance. MSI Integrity. July 2020. Archived from the original on 2021-10-17. Retrieved 2021-10-17.
- ^ "Destruction: Certified". greenpeace.org. Greenpeace International. 10 March 2021. Archived from the original on 22 October 2021. Retrieved 17 October 2021.
- ^ "Governance". brcgs.com. BRCGS. Archived from the original on 2023-05-03. Retrieved 2023-05-03.
- ^ "LGC acquires BRCGS". lgcgroup.com. LGC. Archived from the original on 21 September 2021. Retrieved 21 September 2021.
- ^ "BRC service fee increase 2022". techni-k.co.uk. Techni-K. Archived from the original on 2023-04-21. Retrieved 2023-05-03.
- ^ "KKR scores 3x return on sale of LGC to Cinven & Astorg". penews.com. Private Equity News. Archived from the original on 21 September 2021. Retrieved 21 September 2021.
Further reading
- Kellermann, Martin (2019). Ensuring Quality to Gain Access to Global Markets: A Reform Toolkit (PDF). International Bank for Reconstruction and Development / The World Bank and Physikalisch-Technische Bundesanstalt (PTB). Standards Chapter, pp. 45–68. ISBN 978-1-4648-1372-6.
- Good Standardization Practices (GSP) (2019). International Organization for Standardization (ISO). ISBN 978-92-67-10986-2.