Template:Infobox roller coaster/sandbox

{{{name}}}
{{{name}}}
Previously known as {{{previousnames}}}
	[[File:{{{logo}}}\|{{{logo_width}}}]]
	[[File:{{{image}}}\|{{{image_width}}}]] {{{caption}}}
[[{{{locationarticle}}}\|{{{location}}}]] or; [[{{{location2}}}]]
Name	{{{altname}}}
Park section	[[{{{locationarticle}}}#{{{section}}}\|{{{section}}}]] - {{{subsection}}}
Pay-Per-Use attraction
	Wheelchair accessible
	Must transfer from wheelchair
	Assistive listening available
	Closed captioning available
	{{{name}}} at RCDB
Video
	[[File:{{{video}}}\|{{{videodimensions}}}]]; {{{videocaption}}}

This is the

template sandbox page for Template:Infobox roller coaster (diff).
See also the companion subpage for test cases

.

Template documentation[view] [edit] [history] [purge]

This template uses Lua:

This template should only be used in articles on individual roller coasters. It should not be used in the park's article, as the auto-categorization will place the article in several inappropriate categories. Also, it should not be used in park articles because every coaster should have its own article, and cluttering up the park's article with infoboxes simply doesn't look good.

For dual-tracked coasters, use {{Infobox dual roller coaster}}.

Usage

Please only use this infobox on roller coasters. Infoboxes are available for other amusement rides including water rides (Infobox water ride) and for all other attractions (Infobox attraction).

Single-location roller coaster

{{Infobox roller coaster
| name                 =
| previousnames        =
| logo                 = <!--Use ONLY the filename, not a full [[File:]] link-->
| logo_alt             = <!--Alt text. [[MOS:ALT]]-->
| logodimensions       = <!--Must be expressed in pixels (px); default is 250px. You can also use a scaling factor in logo_upright.-->
| image                = <!--Use ONLY the filename, not a full [[File:]] link-->
| image_alt            = <!--Alt text. [[MOS:ALT]]-->
| imagedimensions      = <!--Must be expressed in pixels (px); default is 250px. You can also use a scaling factor in logo_upright.-->
| caption              =
| location             = <!--Must not be linked.-->
| locationarticle      = <!--For specifying an alternate link to the location article. Must not be linked.-->
| section              = <!--Must not be linked.-->
| subsection           = <!--Should be linked.-->
| coordinates          = <!--Use {{Coord|LAT|LON|type:landmark|display=inline,title}} -->
| status               = <!--Operating, Closed, Under construction, Removed-->
| opened               = <!--Use {{Start date|YYYY|MM|DD}} -->
| soft_opened          = <!--Use {{Start date|YYYY|MM|DD}} -->
| year                 = <!--If specified will override opened date and auto-categorize the coaster.-->
| closed               = <!--Use {{End date|YYYY|MM|DD}} -->
| cost                 =
| previousattraction   =
| replacement          =
| type                 = <!--Must be "Steel" or "Wood", nothing else. Must not be linked.-->
| type2                = <!--Must not be linked, will auto-categorize the coaster.-->
| type3                = <!--Must not be linked, will auto-categorize the coaster.-->
| manufacturer         = <!--Must not be linked, will auto-categorize the coaster.-->
| manufacturerarticle  = <!--Must not be linked.-->
| designer             =
| model                =
| track                =
| lift                 =
| height_ft            = <!--Must be expressed in feet and may contain only numeric characters.-->
| height_m             = <!--Must be expressed in metres and may contain only numeric characters.-->
| drop_ft              = <!--Must be expressed in feet and may contain only numeric characters.-->
| drop_m               = <!--Must be expressed in metres and may contain only numeric characters.-->
| length_ft            = <!--Must be expressed in feet and may contain only numeric characters.-->
| length_m             = <!--Must be expressed in metres and may contain only numeric characters.-->
| speed_mph            = <!--Must be expressed in miles per hour and may contain only numeric characters.-->
| speed_km/h           = <!--Must be expressed in kilometres per hour and may contain only numeric characters.-->
| inversions           =
| duration             =
| angle                = <!--Do not include "degrees", it is added automatically.-->
| capacity             =
| acceleration         = <!--Expression in full form e.g. "X to Y mph (χ to ψ km/h) in Z seconds". -->
| acceleration_from    = <!--Initial speed in mph or km/h defaults to zero, only numeric characters-->
| acceleration_mph     = <!--Final speed in mph may contain only numeric characters-->
| acceleration_km/h    = <!--Final speed in km/h may contain only numeric characters-->
| acceleration_in      = <!--Number of seconds may contain words -->
| gforce               =
| restriction_ft       = <!--Must be expressed in feet and may contain only numeric characters.-->
| restriction_in       = <!--Must be expressed in inches and may contain only numeric characters.-->
| restriction_cm       = <!--Must be expressed in centimetres and may contain only numeric characters.-->
| trains               = <!--Must contain only numeric characters.-->
| carspertrain         = <!--Must contain only numeric characters.-->
| rowspercar           = <!--Must contain only numeric characters.-->
| ridersperrow         = <!--Must contain only numeric characters.-->
| virtual_queue_name   =
| virtual_queue_image  = <!--Use ONLY the filename, not a full [[File:]] link-->
| virtual_queue_status = <!--should be available if above fields are used-->
| virtual_queue_name2 = 
| virtual_queue_image2= <!--Use ONLY the filename, not a full [[Image:]] link-->
| virtual_queue_status2=<!--should be available if above fields are used-->
| single_rider         = <!--Must be "available" if available.-->
| accessible           = <!--Must be "available" if available.-->
| transfer_accessible  = <!--Must be "available" if available.-->
| assistive_listening  = <!--Must be "available" if available.-->
| cc                   = <!--Must be "available" if available.-->
| theme                =
| website              = <!--Use {{Official website|http://www.example.org/}} -->
| rcdb_number          = <!--The number in the URL of the coaster's RCDB page. Number will be pulled from Wikidata, if available-->
| custom_label_1       =
| custom_value_1       =
| custom_label_2       =
| custom_value_2       =
| custom_label_3       =
| custom_value_3       =
| custom_label_4       =
| custom_value_4       =
| custom_label_5       =
| custom_value_5       =
| custom_label_6       =
| custom_value_6       =
| custom_label_7       =
| custom_value_7       =
| custom_label_8       =
| custom_value_8       =
| video                = <!--Use ONLY the filename, not a full [[File:]] link-->
| videosize            = <!--Must be expressed in pixels (px); default is 250px-->
| videocaption         =
}}

Multiple-location roller coaster

A simple additional location can be named in parameter "location2=" but a 2nd site with separate status or dates should be fully specified, instead, by parameter "extend=" with a full {.../extend} infobox for each location, as shown below:

{{Infobox roller coaster
| name                 = 
| logo                 = <!--Use ONLY the filename, not a full [[File:]] link-->
| logodimensions       = <!--Must be expressed in pixels (px); default is 250px-->
| image                = <!--Use ONLY the filename, not a full [[File:]] link-->
| imagedimensions      = <!--Must be expressed in pixels (px); default is 250px-->
| caption              = 
| location             = <!--Must not be linked.-->
| locationarticle      = <!--For specifying an alternate link to the location article. Must not be linked.-->
| section              = <!--Must not be linked.-->
| subsection           = <!--Should be linked.-->
| coordinates          = <!--Use {{Coord|LAT|LON|type:landmark|display=inline,title}} -->
| status               = <!--Operating, Closed, Under construction, Removed-->
| opened               = <!--Use {{Start date|YYYY|MM|DD}} -->
| soft_opened          = <!--Use {{Start date|YYYY|MM|DD}} -->
| year                 = <!--If specified will override opened date and auto-categorize the coaster.-->
| closed               = <!--Use {{End date|YYYY|MM|DD}} -->
| cost                 = 
| previousnames        = 
| extend               = {{Infobox roller coaster/extend
|name                 = <!--If different from name of article-->
|location             = <!--Must not be linked.-->
|locationarticle      = <!--For specifying an alternate link to the location article. Must not be linked.--> 
|coordinates          = <!--Use {{Coord|display=inline}}-->     
|section              = <!--Must not be linked.-->
|subsection           = <!--Should be linked.-->
|status               = <!--Operating, Closed, Under construction, Removed-->
|soft_opened          = 
|opened               = <!--Use {{Start date}} -->
|year                 = <!--Used to override categorization based on {{Start date}}-->
|closed               = <!--Use {{End date}} -->
|cost                 = 
|previousattraction   = 
|replacement          = 
|website              = <!--Official location-specific website. Use {{URL|example.com}} -->
|custom_label         = 
|custom_value         = 
|virtual_queue_name   = <!--Use only if virtual queues are different at different locations-->
|virtual_queue_image  = <!--Use ONLY the filename, not a full [[File:]] link-->
|virtual_queue_status = <!--should be "available" if above fields are used-->
|single_rider         = <!--Use only if status is different at different locations. Must be "available" if available.-->
|pay_per_use          = <!--Use only if status is different at different locations. Must be "available" if available.-->
|accessible           = <!--Use only if status is different at different locations. Must be "available" if available.-->
|transfer_accessible  = <!--Use only if status is different at different locations. Must be "available" if available.-->
|assistive_listening  = <!--Use only if status is different at different locations. Must be "available" if available.-->
|cc                   = <!--Use only if status is different at different locations. Must be "available" if available.-->
|rcdb_number          = <!--The number in the URL of the coaster's location-specific RCDB page-->
}}
| type                 = <!--Must be "Steel" or "Wood", nothing else. Must not be linked.-->
| type2                = <!--Must not be linked, will auto-categorize the coaster.-->
| type3                = <!--Must not be linked, will auto-categorize the coaster.-->
| manufacturer         = <!--Must not be linked, will auto-categorize the coaster.-->
| manufacturerarticle  = <!--Must not be linked.-->
| designer             = 
| model                = 
| track                = 
| lift                 = 
| height_ft            = <!--Must be expressed in feet and may contain only numeric characters.-->
| height_m             = <!--Must be expressed in metres and may contain only numeric characters.-->
| drop_ft              = <!--Must be expressed in feet and may contain only numeric characters.-->
| drop_m               = <!--Must be expressed in metres and may contain only numeric characters.-->
| length_ft            = <!--Must be expressed in feet and may contain only numeric characters.-->
| length_m             = <!--Must be expressed in metres and may contain only numeric characters.-->
| speed_mph            = <!--Must be expressed in miles per hour and may contain only numeric characters.-->
| speed_km/h           = <!--Must be expressed in kilometres per hour and may contain only numeric characters.-->
| inversions           = 
| duration             = 
| angle                = <!--Do not include "degrees", it is added automatically.-->
| capacity             = 
| acceleration         = <!--Expression in full form e.g. "X to Y mph (χ to ψ km/h) in Z seconds". -->
| acceleration_from    = <!--Initial speed in mph or km/h defaults to zero, only numeric characters-->
| acceleration_mph     = <!--Final speed in mph may contain only numeric characters-->
| acceleration_km/h    = <!--Final speed in km/h may contain only numeric characters-->
| acceleration_in      = <!--Number of seconds may contain words -->
| gforce               = 
| restriction_ft       = <!--Must be expressed in feet and may contain only numeric characters.-->
| restriction_in       = <!--Must be expressed in inches and may contain only numeric characters.-->
| restriction_cm       = <!--Must be expressed in centimetres and may contain only numeric characters.-->
| trains               = <!--Must contain only numeric characters.-->
| carspertrain         = <!--Must contain only numeric characters.-->
| rowspercar           = <!--Must contain only numeric characters.-->
| ridersperrow         = <!--Must contain only numeric characters.-->
| virtual_queue_name   = <!--Use only if virtual queue is the same at all locations-->
| virtual_queue_image  = <!--Use ONLY the filename, not a full [[File:]] link-->
| virtual_queue_status = <!--should be available if above fields are used-->
| virtual_queue_name2  = <!--Use only if second virtual queue is the same at all locations-->
| virtual_queue_image2 = <!--Use ONLY the filename, not a full [[Image:]] link-->
| virtual_queue_status2= <!--should be available if above fields are used-->
| single_rider         = <!--Use only if status is same at all locations. Must be "available" if available.-->
| accessible           = <!--Use only if status is same at all locations. Must be "available" if available.-->
| transfer_accessible  = <!--Use only if status is same at all locations. Must be "available" if available.-->
| assistive_listening  = <!--Use only if status is same at all locations. Must be "available" if available.-->
| cc                   = <!--Use only if status is same at all locations. Must be "available" if available.-->
| pay_per_use          = <!--Use only if status is same at all locations. Must be "available" if available.-->
| theme                = 
| website              = <!--Use {{Official website|http://www.example.org/}} -->
| rcdb_number          = <!--The number in the URL of the coaster's RCDB page. Number will be pulled from Wikidata, if available-->
| custom_label_1       = 
| custom_value_1       = 
| custom_label_2       = 
| custom_value_2       = 
| custom_label_3       = 
| custom_value_3       = 
| custom_label_4       = 
| custom_value_4       = 
| custom_label_5       = 
| custom_value_5       = 
| custom_label_6       = 
| custom_value_6       = 
| custom_label_7       = 
| custom_value_7       = 
| custom_label_8       = 
| custom_value_8       = 
| video                = <!--Use ONLY the filename, not a full [[File:]] link-->
| videosize            = <!--Must be expressed in pixels (px); default is 250px-->
| videocaption         = 
}}

Additional locations

Additional locations should be placed in separate, back-to-back calls to {{Infobox roller coaster/extend}} with the |extend= parameter as shown below:

| extend= {{Infobox roller coaster/extend
  | location= site1 ...
  }}{{Infobox roller coaster/extend
  | location= site2 ...
  }}

Note how each instance of extend= contains its own |location= parameter in addition to other parameters like |status=, |opened=, etc.

See the |extend= parameter description below for more information on how to add additional locations. Also see "Backlot Stunt Coaster" to see how this template has been applied for three locations.

{{Infobox roller coaster/extend
|name                 = <!--If different from name of article-->
|location             = <!--Must not be linked.-->
|locationarticle      = <!--For specifying an alternate link to the location article. Must not be linked.--> 
|coordinates          = <!--Use {{Coord|display=inline}}-->     
|section              = <!--Must not be linked.-->
|subsection           = <!--Should be linked.-->
|status               = <!--Operating, Closed, Under construction, Removed-->
|soft_opened          = 
|opened               = <!--Use {{Start date}} -->
|year                 = <!--Used to override categorization based on {{Start date}}-->
|closed               = <!--Use {{End date}} -->
|cost                 =
|previousattraction   =
|replacement          =
|website              = <!--Official location-specific website. Use {{URL|example.com}} -->
|custom_label         =
|custom_value         =
|virtual_queue_name   = <!--Use only if virtual queues are different at different locations-->
|virtual_queue_image  = <!--Use ONLY the filename, not a full [[File:]] link-->
|virtual_queue_status = <!--should be "available" if above fields are used-->
|single_rider         = <!--Use only if status is different at different locations. Must be "available" if available.-->
|pay_per_use          = <!--Use only if status is different at different locations. Must be "available" if available.-->
|accessible           = <!--Use only if status is different at different locations. Must be "available" if available.-->
|transfer_accessible  = <!--Use only if status is different at different locations. Must be "available" if available.-->
|assistive_listening  = <!--Use only if status is different at different locations. Must be "available" if available.-->
|cc                   = <!--Use only if status is different at different locations. Must be "available" if available.-->
|rcdb_number          = <!--The number in the URL of the coaster's location-specific RCDB page-->
}}

Parameters

Parameter	Description	Example
Title and images
name	The coaster's full, official name. Should not be linked.	Kingda Ka
previousnames	Any previous names of the coaster. Include years of use if possible.	Corkscrew (1982–2009)
logo	The logo of the coaster. Use only the filename of the image. For example, you should use "Buzzsaw logo.png" instead of "[[File:Buzzsaw logo.png\|250px]]"	Buzzsaw logo.png
logodimensions	Set the size of the above image. If "[[File:Buzzsaw logo.png\|200px]]" would have been used otherwise, the imagedimensions is "200px". Must be expressed as a number, followed by "px".	200px
image	The primary picture of the coaster. Use only the filename of the image. For example, you should use "Kingda Ka.jpg" instead of "[[File:Kingda Ka.jpg\|250px]]"	Kingda Ka.jpg
imagedimensions	Set the size of the above image. If "[[File:Kingda Ka.jpg\|200px]]" would have been used otherwise, the imagedimensions is "200px". Must be expressed as a number, followed by "px".	200px
caption	The caption for the picture.	An overview of Kingda Ka
Primary location
location	The name of the park where the coaster resides, or use "Portable" if the coaster does not have a fixed location. Use the full, properly capitalized name of the park. Do not include disambiguatory brackets as described in locationarticle below, and do not link it. It will be linked automatically, so the park name must be exact.	La Ronde
locationarticle	If a park article contains disambiguatory brackets, for example La Ronde (amusement park), then use the complete name here. This will link the text in the 'location' field to the correct article.	La Ronde (amusement park)
altname	Name of ride at primary location, if different from the article name. Name history may be placed here as an unbulleted list using {{ ubl }}.	`{{ubl \|Name 1 (1900–2000)\|Name 2 (2000–present)}}`
section	The section of the park where the coaster is located. Should not be linked, as a section link will be automatically generated using the location parameter. For example, a location of Six Flags Great Adventure and a section of Golden Kingdom will create this link: [[Six Flags Great Adventure#Golden Kingdom\|Golden Kingdom]].	Golden Kingdom
subsection	If the coaster is located within a subsection of a larger section within a park, provide the name for that subsection here. Should not be linked, a section link will be automatically generated using the location parameter.	X-Base
coordinates	The geographical coordinates for the roller coaster's station. The template {{Coord }} should be used with the parameter `display=inline,title` for a single coaster or `display=inline` for multiple coasters. Coordinates should be rounded to the nearest .0001 (ten thousandths).	{{coord\|-27.8623\|153.3149 \|type:landmark \|display=inline,title}}
status	The current status of the roller coaster: `Operating, Closed, Under construction, Removed`. For long-term closures, use Closed. For those under refurbishment, use Under construction.	Operating
opened	The date the coaster officially opened to the public. For unofficial preview openings, use the "soft-opened" parameter. Use the {{Start date}} template and add the `df=yes` flag when the country the coaster is located in uses the DD-MM-YY date format. This will auto-categorize by opening year.	{{Start date\|2011\|9\|17}}
soft_opened	The date the coaster first opened unofficially and not to the public. Should be used for preview dates (e.g., media day) using the {{Start date}} template and add the `df=yes` flag when the country the coaster is located in uses the DD-MM-YY date format.	{{Start date\|2011\|9\|17\|df=yes}}
year	The year the coaster opened under its current name (optional). This overrides the `opened` parameter and categorizes the coaster by opening year (helpful when the current name is not the same as when it first opened). Must only contain numerals and should only be used in conjunction with the "opened" parameter.	2011
closed	The date the coaster officially closed and ceased operations. Should only be used if the coaster is closed permanently or indefinitely. Do not use this field for seasonal closures or when the coaster is undergoing routine maintenance. Use the {{End date}} template and add the `df=yes` flag when the country the coaster is located in uses the DD-MM-YY date format.	{{End date\|2003\|8\|8\|df=yes}}
cost	The cost of construction expressed in the currency of the country where the coaster is located.	[[A$]]7 million
previousattraction	If this coaster replaced another ride, supply the name of the attraction it replaced and link as needed.	[[The Space Diver]]
replacement	If this coaster was replaced, supply the name of the attraction that replaced it and link as needed.	[[X-Flight (Six Flags Great America)\|X-Flight]]
location_website	The coaster's official website URL for the particular location this is specified for. See Batman: The Ride.	{{Official website \|https://www.sixflags.com /greatamerica/attractions/batman-ride}}
location_custom_label =
location_custom_value =
location_virtual_queue_name	Use these fields if virtual queuing system availability is different at different locations. The name parameter is used to describe what it is (e.g. Disney's Fastpass, Universal Express, Dreamworld's Q4U etc.). The status field should read "available" if the virtual queuing system is available. The image parameter should contain the name (without the [[File:]] or [[File:]] tag. Examples include: Universal Express availability.svg Fastpass availability icon.svg (could also be used for Six Flags' Flash Pass) Dreamworld Q4U availability.svg Cedar Fair Fast Lane availibility.svg Merlin Entertainment Fastrack availibility.svg	[[Q4U]]
location_virtual_queue_image		Dreamworld Q4U availability.svg
location_virtual_queue_status		available
location_single_rider	Include any of these fields followed by the word "available" if any of these have different availability at different locations. If any of these are available at all locations, use the non-location specific versions in "Rider information" section below. "accessible" refers to Wheelchair Accessibility. "transfer_accessible" means riders must transfer from wheelchair.	available
location_accessible
location_transfer_accessible
location_assistive_listening
location_cc
location_pay_per_use	Set to "yes" if the ride is a Pay-Per-Use attraction at the first location, but isn't at all locations	yes
location_rcdb_number	The number in the URL of the coaster's location-specific RCDB page	2832
Additional locations
extend	This parameter allows information about the same roller coaster (either relocation or mirror copy) to be added within the same infobox. It relies on Template:Infobox roller coaster/extend which contains all of the "Primary location" parameters described above. Full syntax is shown in the Additional locations section above. One or more of these templates can be concatenated together.	{{Infobox roller coaster/extend \| location = Carowinds \| section = Planet Snoopy \| status = Operating \| opened = {{Start date\|2003\|3\|22}} \| year = 2003 }}
Specific details
type	The primary track type, Steel or Wood only. This refers to the composition of the track and does not take the support structure into account. Should not be linked, as it will be linked automatically and added to the appropriate category: Category:Steel roller coasters or Category:Wooden roller coasters.	Steel
type2	The secondary and tertiary types. `\|type2=` and `\|type3=` can be any one of the following, or another type if appropriate: 4th Dimension Bobsled Dive Coaster Duelling Enclosed Floorless Coaster Flying Indoor Inverted Launched Powered Racing Shuttle Side friction Spinning Stand-up Suspended Virginia Reel Wild Mouse Wing Coaster This parameter should not be linked. It will be linked automatically and add the coaster to a category for that type. For example, "Inverted" will link to Inverted roller coaster and add the coaster to Category:Inverted roller coasters. Note: This is not the track layout. Layout descriptions like Out and Back and Twister should instead be specified in the `\|track=` parameter. Height categories – Hypercoaster, Gigacoaster, and Stratacoaster – also do not belong here and will be automatically calculated by the `\|height=` entry.	Launched
type3		Shuttle
manufacturer	The full, official name of the coaster's primary manufacturer. This should NOT be linked, it will be automatically linked and it will add the coaster to a category for that manufacturer. If that category does not exist then it will generate the hidden category:Roller coasters manufactured by other builders.	Intamin
manufacturerarticle	If a manufacturer article contains disambiguatory brackets, for example Lagoon (amusement park), then use the complete name here. This will direct the text in the 'manufacturer' field to the right page.	Lagoon (amusement park)
designer	Company, people, or person responsible for the coaster's design pertaining to its track, support structure, and/or layout. Will not automatically link, so link to an appropriate article if applicable. Use {{ ubl }} for multiple entries.	[[Werner Stengel]]
model	The model name as listed at RCDB or another secondary source cited in the article. This will often, but not always, be the same as the secondary type. Will not be automatically linked and should only be linked if it differs from `\|type2=`.	SkyLoop
track	The track layout as listed on RCDB. This could be something like Out and Back, Twister, Moebius Loop, Terrain etc. Because track layouts can vary greatly from the standard ones, this parameter will not be automatically linked and will not automatically add the coaster to a category.	[[Out and back roller coaster\|Out and back]]
Statistics
lift	The type of lift or launch system used by the coaster, such as chain, cable, or linear induction motor. Will not be automatically linked or categorized, so link as appropriate. When more than one lift hill exists, list each one using {{ ubl }}.	Chain [[lift hill]] [[Linear induction motor\|LIM launch]]
height_ft	Only accepts numeric values. The coaster's height, drop, and length may be expressed in feet or metres, and speed may be expressed in miles per hour or kilometres per hour. Conversions to SI/metric (metres or km/h) or imperial/US customary (feet or mph) will be automatically calculated specified in parenthesis – the reason why the values must be entirely numeric. Additionally, the height_ft or height_m parameter will be used to automatically categorize the coaster's height classification (if applicable): Hypercoaster, Gigacoaster, etc.	152
height_m		46.2
drop_ft		150
drop_m		45
length_ft		490
length_m		150
speed_mph		65
speed_km/h		105
inversions	Represents the number of times riders are turned upside down during the course of the ride. Should be consistent with RCDB and/or other secondary sources. Beyond-vertical drops are not typically counted. Some complex elements, such as the banana roll on Steel Curtain, may result in conflicting assessments.	2
duration	The actual duration of the ride, which is typically measured from the moment the train begins moving to the moment it comes to a full stop on the final brake run. The time it takes to return to the station from the brake run varies depending on the number of trains and the complexity of boarding process, so this additional time is not usually taken into account. RCDB is typically cited here.	1:45
angle	The maximum vertical angle, in degrees, of the track's steepest drop. Usually the angle of the first drop, but not always. Inversions are not taken into account.	120
capacity	The theoretical maximum number of guests that the coaster can accommodate in one hour.	600
acceleration	The maximum rate of acceleration of the coaster. If not listed on RCDB, then it should be taken from a secondary source . Often specified for launched coasters. If this parameter is used you must express the acceleration in full form.	0 to 62 mph (0 to 100 km/h) in 2 seconds
acceleration_from	The maximum rate of acceleration of the coaster, broken out into multiple parameters. Must use `\|acceleration_in=`, along with either `\|acceleration_mph=` or `\|acceleration_km/h=` `\|acceleration_from=` the initial speed of the roller coaster before acceleration, if known. Parameter is optional and defaults to zero. The value must be numeric. `\|acceleration_mph=` the final speed of the roller coaster in mph. Conversion to km/h will be given in parenthesis. The value must be numeric. `\|acceleration_km/h=` the final speed of the roller coaster in km/h. Conversions to mph will be given in parenthesis. The value must be numeric. `\|acceleration_in=` the number of seconds it takes to reach the final speed. The value does not have to be numeric. Note: The `\|acceleration_from=` parameter is optional, but should be specified if known.	0
acceleration_mph		62
acceleration_km/h		100
acceleration_in		2
gforce	The maximum g-force experienced by riders during the ride.	4.5
trains	All 4 parameters must be specified. If one is missing, none of the information entered will be displayed. Only use numeric values. If the number of trains is unknown, add the word "Several" instead of leaving blank. You can optionally use the custom_label parameter below as an alternate method for special circumstances, as shown at Ultra Twister (Six Flags)	4
carspertrain		6
rowspercar		3
ridersperrow		2
Rider information
restriction_ft	Height restriction of the roller coaster. All values must be entirely numeric. The template will automatically convert the values and display them in feet and inches and in centimetres. For the imperial unit of measure, a combination of the feet and inches parameters can be used (e.g. 4ft 6in).	4
restriction_in		48
restriction_cm		120
virtual_queue_name	Use these fields if there is a virtual queuing system available. The name parameter is used to describe what it is (e.g. Disney's Fastpass, Universal Express, Dreamworld's Q4U etc.). The status field should read "available" if the virtual queuing system is available. The image parameter should contain the name (without the [[File:]] or [[File:]] tag. Examples include: Universal Express availability.svg Fastpass availability icon.svg (could also be used for Six Flags' Flash Pass) Dreamworld Q4U availability.svg Cedar Fair Fast Lane availibility.svg Merlin Entertainment Fasttrack availability.svg	[[Q4U]]
virtual_queue_image		Dreamworld Q4U availability.svg
virtual_queue_status		available
single_rider	Include any of these fields followed by the word "available" if any of these apply to the attraction at all locations. If any of these are different at different locations, use the location-specific versions in the "Rider information" section above and {{Infobox roller coaster/extend}}. "accessible" refers to Wheelchair Accessibility. "transfer_accessible" means riders must transfer from wheelchair.	available
accessible
transfer_accessible
assistive_listening
cc
Additional information
pay_per_use	Set to "yes" if the ride is an upcharge, Pay-Per-Use attraction .	yes
theme	The ride's primary theme. Should be linked and should be based on a reliable source (that's cited in the article body).	[[Superman]]
website	The ride's official website page, which is typically a subpage on the park's main website.	{{Official website\|https://www.sixflags.com /greatadventure/attractions/kingda-ka}}
rcdb_number	The number specified in the URL (not the full URL) of the coaster's entry at Roller Coaster Database (RCDB). For example, Kingda Ka's RCDB page is https://rcdb.com/2832.htm , so this parameter would be set to 2832. When left blank, the template will attempt to pull the number from Wikidata, if available.	2832
custom_label_1 … custom_label_8	If there is a general statistic that is missing from the above categories, include it here. The label fields will appear in bold on the left while the values will appear normally on the right.	Replaced
custom_value_1 … custom_value_8		Iron Wolf
Video
video	The primary picture of the coaster. Use only the filename of the image. For example, you should use "Kanonen, Liseberg.ogv" instead of "[[File:Kanonen, Liseberg.ogv\|250px]]"	Kanonen, Liseberg.ogv
videodimensions	Set the size of the above video. If "[[File:Kanonen, Liseberg.ogv\|200px]]" would have been used otherwise, the imagedimensions is "200px". Must be expressed as a number, followed by "px".	200px
videocaption	The caption for the video.	Video showing the entire ride from a first person view.

Measurement conversions

By default, measurement conversions in this template invoke {{convert}}, which will automatically attempt to round to a level of precision that is similar to the input value. Most of the time, this works as expected. However, there are situations where the output may not be satisfactory.

Default behavior, for comparison:

|speed_km/h=179 → 179 km/h (111 mph) Y
|speed_km/h=180 → 180 km/h (110 mph) N

In the second example above, the actual conversion is 111.847. However, the input value of 180 only has two significant figures, so the conversion rounds to the nearest tens position resulting in 110. A workaround available in this template is to specify the number of significant figures.

|speed_km/h=180

|sigfig_speed=3 → 180 km/h (112 mph)

Note: Setting |sigfig_speed=3 forces the conversion to use three significant figures and round to the ones position resulting in 112 (rounds up from 111.8).

Here is a complete list of available |sigfig= parameters:

|sigfig_height=
|sigfig_drop=
|sigfig_length=
|sigfig_speed=

Article categories (visible)

Any article containing this template is automatically added to additional categories based on the following parameters:

status: if "announced" add Category:Proposed roller coasters; if "under construction" add Category:Proposed roller coasters
year: if defined add [[Category:Roller coasters introduced in {{{year}}}]], such as Category:Roller coasters introduced in 2001
location: if "Portable" add Category:Portable roller coasters
type: if "Steel" add Category:Steel roller coasters; if "Wood" add Category:Wooden roller coasters; if "Hybrid" add Category:Hybrid roller coasters
type2: if defined add [[Category:{{{type2}}} roller coasters]], such as Category:Launched roller coasters
type3: if defined add [[Category:{{{type3}}} roller coasters]], such as Category:Shuttle roller coasters
manufacturer
manufacturer-category: if defined add [[Category:Roller coasters manufactured by {{{manufacturer-category|{{{manufacturer}}}}}}]], such as Category:Roller coasters manufactured by Intamin
height_ft
height_m: metres are converted to feet and category is not added if noheightcategory is defined; if 200-299 add Category:Hypercoasters; if 300-399 add Category:Gigacoasters; if 400-499 add Category:Stratacoasters

Status categories added via {{Infobox attraction/status}} include:

Dated categories added via {{Infobox attraction/status}} include sub-categories of:

Tracking categories

Hidden maintenance/tracking categories which may be added to articles using this infobox:

Category:Wikipedia infobox roller coaster articles without coordinates (44) – if the coordinates parameter is empty or missing.
Category:Amusement ride article using undocumented parameters (0) – if any of the following parameters are defined:
- height – removed, use height_ft or height_m
- drop – removed, use drop_ft or drop_m
- length – removed, use length_ft or length_m
- speed – removed, use speed_mph or speed_km/h
- sitearea – removed, use sitearea_sqft or sitearea_sqm
- restriction – removed, use restriction_ft / restriction_in or restriction_cm

Microformat

The HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

Sub-templates

If the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.

If it has a URL, use {{URL}}.

Please do not remove instances of these sub-templates.

Classes

hCard uses HTML classes including:

adr
agent
category
county-name
extended-address
fn
label
locality
nickname
note
org
region
street-address
uid
url
vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

geo
latitude
longitude

Please do not rename or remove these classes nor collapse nested elements which use them.

Precision

When giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name= parameter.

Guidance on upright scaling parameters

Calculating "image_upright"

The image_upright parameter, and image2_upright and logo_upright where applicable, is/are provided so as to facilitate the use of scalable images in this infobox, in accordance with the instructions at

WP:IMAGESIZE

, which advises against the use of "px" (for example: thumb|300px), as this forces a fixed image width.

Scalable images respect the user's base preference, which may have been selected for that user's particular devices. Module:InfoboxImage, which is used in this infobox, accommodates the use of scaling. However, setting the appropriate scale is slightly more complex than setting a raw "px" value. This guide provides a quick conversion table to make the process of setting a scale easier. It is based on a default thumbnail setting of 220px.

170px → upright=0.75
180px → upright=0.8
190px → upright=0.85
200px → upright=0.9
210px → upright=0.95
220px → upright=1
230px → upright=1.05
240px → upright=1.1
250px → upright=1.15
260px → upright=1.2
270px → upright=1.23
280px → upright=1.25
290px → upright=1.3
300px → upright=1.35

TemplateData

No description.

Template parameters[Edit template data]
Parameter		Description	Type	Status
name	`name`	The coaster's full, official name. Should not be linked. Example Kingda Ka	String	required
previousnames	`previousnames`	Any previous names of the coaster. Include years of use if possible. Example Corkscrew (1982–2009)	String	optional
logo	`logo`	The logo of the coaster. Use only the filename of the image. For example, you should use "Buzzsaw logo.png" instead of "[[File:Buzzsaw logo.png\|250px]]" Example Buzzsaw logo.png	File	optional
logodimensions	`logodimensions` `logo_width`	Set the size of the above image. If "[<nowiki />[File:Buzzsaw logo.png\|200px]]" would have been used otherwise, the imagedimensions is "200px". Must be expressed as a number, followed by "px". Example 200px	String	optional
logo_dimensions	`logo_dimensions`	no description	Unknown	optional
Logo upright scale factor	`logo_upright`	See MOS:UPRIGHT	Number	optional
Logo alternative text	`logo_alt`	Alternative text for the logo. See MOS:ALT for guidance	Unknown	optional
image	`image`	The primary picture of the coaster. Use only the filename of the image. For example, you should use "Kingda Ka.jpg" instead of "[[File:Kingda Ka.jpg\|250px]" Example Kingda Ka.jpg	File	suggested
image_width	`image_width`	no description	Unknown	optional
imagedimensions	`imagedimensions`	Set the size of the above image. If "[<nowiki />[File:Kingda Ka.jpg\|200px]]" would have been used otherwise, the imagedimensions is "200px". Must be expressed as a number, followed by "px". Example 200px	String	optional
image_dimensions	`image_dimensions`	no description	Unknown	optional
caption	`caption`	The caption for the picture. Example An overview of Kingda Ka	String	optional
Image upright scale factor	`image_upright`	A numerical factor for the sizing of the image. See MOS:UPRIGHT for more information.	Number	optional
Image alternative text	`image_alt` `alt`	Alternative text for the image. See MOS:ALT for guidance	Unknown	optional
locationarticle	`locationarticle`	If a park article contains disambiguatory brackets, for example [[La Ronde (amusement park)]], then use the complete name here. This will link the text in the 'location' field to the correct article. Example La Ronde (amusement park)	Page name	optional
location	`location`	The name of the park where the coaster resides, or use "Portable" if the coaster does not have a fixed location. Use the full, properly capitalized name of the park. Do not include disambiguatory brackets as described in locationarticle below, and do not link it. It will be linked automatically, so the park name must be exact. Example La Ronde	String	optional
location2	`location2`	no description	Unknown	optional
extend	`extend`	no description	Unknown	optional
altname	`altname`	Name of ride at primary location, if different from the article name. Name history may be placed here as an unbulleted list using {{tl\|plainlist}} or {{tl\|ubl}}. Example {{tlx\|ubl\|Name 1 (1900–2000)\|Name 2 (2000–present)}}	Template	optional
section	`section`	The section of the park where the coaster is located. Should not be linked, as a section link will be automatically generated using the location parameter. For example, a location of Six Flags Great Adventure and a section of Golden Kingdom will create this link: [[Six Flags Great Adventure#Golden Kingdom\|Golden Kingdom]]. Example Golden Kingdom	String	optional
subsection	`subsection`	If the coaster is located within a subsection of a larger section within a park, provide the name for that subsection here. Should not be linked, a section link will be automatically generated using the location parameter. Example X-Base	String	optional
coordinates	`coordinates`	The [[geographical coordinates]] for the roller coaster's station. The template {{tl\|Coord}} should be used with the parameter <code>display=inline,title</code> for a single coaster or <code>display=inline</code> for multiple coasters. Coordinates should be rounded to the nearest .0001 (ten thousandths). Example {{tlx\|coord\|-27.8623\|153.3149 \|type:landmark \|display=inline,title}}	Template	optional
status	`status`	The current status of the roller coaster: <code>Operating, Closed, Under construction, Removed</code>. For long-term closures, use Closed. For those under refurbishment, use Under construction. Example Operating	String	optional
auto-cat	`auto-cat`	no description	Unknown	optional
soft_opened	`soft_opened`	The date the coaster first opened unofficially and not to the public. Should be used for preview dates (e.g., media day) using the {{tl\|Start date}} template and add the <code>df=yes</code> flag when the country the coaster is located in uses the DD-MM-YY date format. Example {{tlx\|Start date\|2011\|9\|17\|df=yes}}	Template	optional
opened	`opened`	The date the coaster officially opened to the public. For unofficial preview openings, use the "soft-opened" parameter. Use the {{tl\|Start date}} template and add the <code>df=yes</code> flag when the country the coaster is located in uses the DD-MM-YY date format. This will auto-categorize by [[:Category:Roller coasters by opening year\|opening year]]. Example {{tlx\|Start date\|2011\|9\|17}}	Template	optional
closed	`closed`	The date the coaster officially closed and ceased operations. Should only be used if the coaster is closed permanently or indefinitely. Do not use this field for seasonal closures or when the coaster is undergoing routine maintenance. Use the {{tl\|End date}} template and add the </code>df=yes</code> flag when the country the coaster is located in uses the DD-MM-YY date format. Example {{tlx\|End date\|2003\|8\|8\|df=yes}}	Template	optional
cost	`cost`	The cost of construction expressed in the currency of the country where the coaster is located. Example [[A$]]7 million	String	optional
previousattraction	`previousattraction`	If this coaster replaced another ride, supply the name of the attraction it replaced and link as needed. Example [[The Space Diver]]	String	optional
replacement	`replacement`	no description	Unknown	optional
location_homepage	`location_homepage`	no description	Unknown	optional
location_website	`location_website`	no description	Unknown	optional
location_custom_label	`location_custom_label`	no description	Unknown	optional
location_custom_value	`location_custom_value`	no description	Unknown	optional
location_virtual_queue_image	`location_virtual_queue_image`	Use these fields if virtual queuing system availability is different at different locations. The image parameter should contain the name (without the [[File:]] or [[File:]] tag. Example Dreamworld Q4U availability.svg	File	optional
location_virtual_queue_name	`location_virtual_queue_name`	Use these fields if virtual queuing system availability is different at different locations. The name parameter is used to describe what it is (e.g. Disney's Fastpass, Universal Express, Dreamworld's Q4U etc.). Example [[Q4U]]	String	optional
location_virtual_queue_status	`location_virtual_queue_status`	Use these fields if virtual queuing system availability is different at different locations. The status field should read "available" if the virtual queuing system is available. Example Available	String	optional
location_single_rider	`location_single_rider`	Include any of these fields followed by the word "available" if any of these have different availability at different locations. If any of these are available at all locations, use the non-location specific versions in "Rider information" section below. "accessible" refers to Wheelchair Accessibility. "transfer_accessible" means riders must transfer from wheelchair. Example Available	String	optional
location_pay_per_use	`location_pay_per_use`	no description	Unknown	optional
location_accessible	`location_accessible`	Include any of these fields followed by the word "available" if any of these have different availability at different locations. If any of these are available at all locations, use the non-location specific versions in "Rider information" section below. "accessible" refers to Wheelchair Accessibility. "transfer_accessible" means riders must transfer from wheelchair. Example available	String	optional
location_transfer_accessible	`location_transfer_accessible`	Include any of these fields followed by the word "available" if any of these have different availability at different locations. If any of these are available at all locations, use the non-location specific versions in "Rider information" section below. "accessible" refers to Wheelchair Accessibility. "transfer_accessible" means riders must transfer from wheelchair. Example available	String	optional
location_assistive_listening	`location_assistive_listening`	Include any of these fields followed by the word "available" if any of these have different availability at different locations. If any of these are available at all locations, use the non-location specific versions in "Rider information" section below. "accessible" refers to Wheelchair Accessibility. "transfer_accessible" means riders must transfer from wheelchair. Example available	String	optional
location_cc	`location_cc`	Include any of these fields followed by the word "available" if any of these have different availability at different locations. If any of these are available at all locations, use the non-location specific versions in "Rider information" section below. "accessible" refers to Wheelchair Accessibility. "transfer_accessible" means riders must transfer from wheelchair. Example available	String	optional
location_rcdb_number	`location_rcdb_number`	The number in the URL of the coaster's location-specific RCDB page Example 2832	Number	optional
type	`type`	The primary track type, Steel or Wood '''only'''. This refers to the composition of the track and does not take the support structure into account. Should ''not'' be linked, as it will be linked automatically and added to the appropriate category: [[:Category:Steel roller coasters]] or [[:Category:Wooden roller coasters]]. Example Steel	Unknown	optional
type2	`type2`	no description	Unknown	optional
type3	`type3`	no description	Unknown	optional
manufacturerarticle	`manufacturerarticle`	no description	Unknown	optional
manufacturer	`manufacturer`	no description	Unknown	optional
designer	`designer`	no description	Unknown	optional
model	`model`	no description	Unknown	optional
track	`track`	no description	Unknown	optional
lift	`lift`	no description	Unknown	optional
height_m	`height_m`	no description	Unknown	optional
sigfig_height	`sigfig_height`	no description	Unknown	optional
sigfig	`sigfig`	no description	Unknown	optional
height_ft	`height_ft`	no description	Unknown	optional
drop_m	`drop_m`	no description	Unknown	optional
sigfig_drop	`sigfig_drop`	no description	Unknown	optional
drop_ft	`drop_ft`	no description	Unknown	optional
length_m	`length_m`	no description	Unknown	optional
sigfig_length	`sigfig_length`	no description	Unknown	optional
length_ft	`length_ft`	no description	Unknown	optional
speed_km/h	`speed_km/h`	no description	Unknown	optional
sigfig_speed	`sigfig_speed`	no description	Unknown	optional
speed_mph	`speed_mph`	no description	Unknown	optional
sitearea_sqm	`sitearea_sqm`	no description	Unknown	optional
sigfig_area	`sigfig_area`	no description	Unknown	optional
sitearea_sqft	`sitearea_sqft`	no description	Unknown	optional
inversions	`inversions`	no description	Unknown	optional
duration	`duration`	no description	Unknown	optional
angle	`angle`	no description	Unknown	optional
capacity	`capacity`	no description	Unknown	optional
acceleration_in	`acceleration_in`	no description	Unknown	optional
acceleration	`acceleration`	no description	Unknown	optional
acceleration_from	`acceleration_from`	no description	Unknown	optional
acceleration_mph	`acceleration_mph`	no description	Unknown	optional
acceleration_km/h	`acceleration_km/h`	no description	Unknown	optional
gforce	`gforce`	no description	Unknown	optional
restraint	`restraint`	no description	Unknown	optional
restraint_type	`restraint_type`	no description	Unknown	optional
restriction_cm	`restriction_cm`	no description	Unknown	optional
restriction_ft	`restriction_ft`	no description	Unknown	optional
restriction_in	`restriction_in`	no description	Unknown	optional
carspertrain	`carspertrain`	no description	Unknown	optional
rowspercar	`rowspercar`	no description	Unknown	optional
ridersperrow	`ridersperrow`	no description	Unknown	optional
trains	`trains`	no description	Unknown	optional
theme	`theme`	no description	Unknown	optional
homepage	`homepage`	no description	Unknown	optional
website	`website`	no description	Unknown	optional
custom_label_1	`custom_label_1`	no description	Unknown	optional
custom_value_1	`custom_value_1`	no description	Unknown	optional
custom_label_2	`custom_label_2`	no description	Unknown	optional
custom_value_2	`custom_value_2`	no description	Unknown	optional
custom_label_3	`custom_label_3`	no description	Unknown	optional
custom_value_3	`custom_value_3`	no description	Unknown	optional
custom_label_4	`custom_label_4`	no description	Unknown	optional
custom_value_4	`custom_value_4`	no description	Unknown	optional
custom_label_5	`custom_label_5`	no description	Unknown	optional
custom_value_5	`custom_value_5`	no description	Unknown	optional
custom_label_6	`custom_label_6`	no description	Unknown	optional
custom_value_6	`custom_value_6`	no description	Unknown	optional
custom_label_7	`custom_label_7`	no description	Unknown	optional
custom_value_7	`custom_value_7`	no description	Unknown	optional
custom_label_8	`custom_label_8`	no description	Unknown	optional
custom_value_8	`custom_value_8`	no description	Unknown	optional
sponsor	`sponsor`	no description	Unknown	optional
virtual_queue_image	`virtual_queue_image`	no description	Unknown	optional
virtual_queue_name	`virtual_queue_name`	no description	Unknown	optional
virtual_queue_status	`virtual_queue_status`	no description	Unknown	optional
virtual_queue_image2	`virtual_queue_image2`	no description	Unknown	optional
virtual_queue_name2	`virtual_queue_name2`	no description	Unknown	optional
virtual_queue_status2	`virtual_queue_status2`	no description	Unknown	optional
single_rider	`single_rider`	no description	Unknown	optional
pay_per_use	`pay_per_use`	no description	Unknown	optional
accessible	`accessible`	no description	Unknown	optional
transfer_accessible	`transfer_accessible`	no description	Unknown	optional
assistive_listening	`assistive_listening`	no description	Unknown	optional
cc	`cc`	no description	Unknown	optional
rcdb_number	`rcdb_number`	no description	Unknown	optional
video	`video`	no description	Unknown	optional
videodimensions	`videodimensions`	no description	Unknown	optional
videocaption	`videocaption`	no description	Unknown	optional
nomissingcoordscategory	`nomissingcoordscategory`	no description	Unknown	optional
year	`year`	no description	Unknown	optional
manufacturer-category	`manufacturer-category`	no description	Unknown	optional
noheightcategory	`noheightcategory`	no description	Unknown	optional

The above documentation is transcluded from Template:Infobox roller coaster/doc.
Editors can experiment in this template's sandbox and testcases pages.
Add categories to the /doc subpage. Subpages of this template.

v t e Buildings and structures infobox templates
Infobox building
Buildings	airport archives brewery casino convention center desalination plant factory hospital housing project hut library lighthouse mill building museum observatory oil refinery power station prison religious building church Hindu temple LDS Temple monastery restaurant school shopping mall station venue
Structures	artwork including statues bell bridge type dam fishery future infrastructure project historic site laboratory military installation monument military memorial pier pipeline power transmission line pyramid roller coaster dual room swimming pool telescope transmitter tunnel urban development project water ride windmill

Usage

Single-location roller coaster

Multiple-location roller coaster

Additional locations

Parameters

Title and images

Primary location

Additional locations

Specific details

Statistics

Rider information

Additional information

Video

Measurement conversions

Article categories (visible)

Tracking categories

Microformat

Sub-templates

Classes

Precision

Guidance on upright scaling parameters

Calculating "image_upright"

TemplateData