Thermochromic ink

Thermochromic ink (also called thermochromatic ink) is a type of

Composition

There are two main variants of thermochromic ink, one composed of leuco dyes and one composed of liquid crystals. For both types of ink, the chemicals need to be contained within capsules around 3 to 5 microns long. This protects the dyes and crystals from mixing with other chemicals that might affect the functionality of the ink.

Leuco dyes

The leuco dye variant is typically composed of leuco dyes with additional chemicals to add different desired effects. It is the most commonly used type because it is easier to manufacture. They can be designed to react to changes in temperature that range from -15 °C to 60 °C. Most common applications of the ink have activation temperatures at -10 °C (cold), 31 °C (body temperature), or 43 °C (warm). At lower temperatures, the ink appears to be a certain color, and once the temperature increases, the ink becomes either translucent or lightly colored, allowing hidden patterns to be seen. This gives the effect of a change in color, and the process can also be reversed by lowering the temperature again.^[5][6][7]

Liquid crystals

Liquid crystals can change from liquid to solid in response to a change in temperature. At lower temperatures, the crystals are mostly solid and hardly reflect any light, causing it to appear black. As it gradually increases in temperature, the crystals become more spaced out, causing light to reflect differently and changing the color of the crystals. The temperatures at which these crystals change their properties can range from -30 °C to 90 °C.^[5]

Applications

On June 20, 2017,^[8] the United States Postal Service released the first application of thermochromic ink to postage stamps in its Total Eclipse of the Sun Forever stamp^[9] to commemorate the solar eclipse of August 21, 2017. When pressed with a finger, body heat turns the black circle in the center of the stamp into an image of the full moon. The stamp image is a photo of a total solar eclipse seen in Jalu, Libya, on March 29, 2006. The photo was taken by retired NASA astrophysicist Fred Espenak, aka "Mr. Eclipse".

Medical uses

In medical training, thermochromic ink can be used to imitate human blood because it shares its color changing property. It is currently being tested in medical simulations involving

Artificial blood or animal blood is typically used in these simulations; however, there are some advantages in using thermochromic ink as an alternative. It can be reused for multiple simulations with minimal variance in the outcomes and it is more cost effective. There are limitations to using this as the ink does not share any other properties with blood, so its only practical use is to observe the change in color of blood.[10]

Product packaging

Product packaging is an important aspect of maintaining the quality of consumer goods. Modern day packaging is split into 2 categories;

In 2006, Pilot Pens Inc. developed a pen with erasable ink that utilized thermochromic ink. It was composed of a solvent, a colorant, and a resin film-forming agent. At temperatures below 65 °C, the ink stayed in a colored state. Once temperatures went above 65 °C, the ink began to melt and became colorless, creating the effect of erasable ink. The ink was able to return to its colored state by cooling the temperature down to below -10 °C.^[13]

See also

• Thermochromism
• Security printing
• Active packaging

References