Airbrush makeup
Airbrush makeup is makeup sprayed onto the skin using an
History
Airbrushed makeup was used in
Uses
Airbrush makeup has become more popular with the advent of
Benefits
Airbrush makeup is characterized by its unique 'globular' application technique. The makeup is dispersed as an extremely fine mist through the airbrush gun. Millions of tiny little dots are created on the skin and when connected and layered together, create somewhat of a net over the entire face. This makes airbrush makeup to be a thin, light layer on the skin that is barely noticeable to the wearer. Certain formulas wear better than others and it is important to choose carefully when deciding what mixture is right for the job. Some airbrush makeups are entirely waterproof unless taken off with a specific remover that breaks down the active ingredient. For instance, silicone-based airbrush fluid is largely waterproof depending on how much, and how you set the makeup. It can be dunked in water (handy for fashion photography or film) or sweat through without removing or dislodging the airbrush base. It does however, take a specific silicone makeup remover to thoroughly take off (but will naturally come off over the course of many hours). In the contemporary makeup scene, airbrush makeup has become a preferred option for bridal and events makeup due to its long wearing and flawless appearance.
Ingredients
Airbrush makeup comes in six different formulas:
- Water based: Finely ground pigments dissipated in water.
- Polymer water based: A mix of water, polymers and pigment, when airbrushed on the skin the polymer dries leaving a continuous coating on the skin.
- Polymer SD40 alcohol based: Instead of using water like the polymer-water-based formula, it uses alcohol which assists with drying of the makeup on the skin.
- Alcohol based: Also called "temporary airbrush inks" alcohol based formulas are generally used when creating fake tattoos.
- Silicone based: Uses silicone for longer lasting wear and without fading. Silicone-based can be thinned with certain types of formula additives, for lighter coverage.[4]: 189
Airbrush makeup can be removed by using a 50/50 mix of isopropyl alcohol and isopropyl myristate.[4]: 189
Technique
Airbrushing for makeup utilizes a freehand technique to apply makeup while manipulating aspects such as distance and air pressure to produce certain effects and coverage. Airbrush makeup artists will either use a circular motion or forward-back motion with the airgun when applying foundation. Both dual-action and single-action airbrushes can be used for airbrushing makeup and require slightly different techniques.
A dual-action airbrush allows the user to control airflow by depressing the trigger with the index finger and drawing it backwards. This draws air from the compressor. The further the trigger is depressed, the more makeup is released. The advantage to using a dual-action airbrush is that one can use the air as a guide before allowing makeup to pass through the nozzle. Air is also used to dry the makeup after application. Makeup is also mixed in the cup by allowing a small amount of air to flow into it, thereby mixing two pigments. This technique is known as 'back-bubbling'.
A single-action airbrush is generally considered easier to use because depressing the trigger releases a fixed ratio of makeup to air. However, in order to achieve different levels of coverage and detail the nozzle has to be changed between applications.
Generally an airbrush makeup artist will work with a PSI range between 0-35 PSI. Many compressors designed for personal use in the home will not achieve airflow greater than 15 PSI. A low PSI is preferable when airbrushing makeup around the face and eyes while full body application (such as covering blemishes or tanning) is easier and faster with a higher PSI.
Airbrush makeup is applied by layering several passes of makeup. This allows the artists to build upon previous layers to produce subtle changes. When applying foundation between 6-12 drops of makeup are used. The makeup is sprayed onto the face at a distance of 6-12 inches.
Stencils are commonly used to assist the application of difficult areas such as eye-liner. Stencils are also available for body-art and temporary tattoos.
References
- ISBN 978-1-934386-88-0. Retrieved 7 November 2011.
- ^ "Westmore: Making Faces For Film". AD&A Museum UC Santa Barbara. 4 June 2023. Archived from the original on 6 January 2018.
- ^ ISBN 978-1-84480-144-2. Retrieved 7 November 2011.
- ^ ISBN 978-0-240-80941-0. Retrieved 7 November 2011.