British Motor Corporation (Australia)

British Motor Corporation (Australia) was a motor manufacturing company formed in Australia in 1954 by the merger of the Austin Motor Company (Australia) and Nuffield (Australia).^[1] This followed the merger in 1952 of the Austin Motor Company and the Nuffield Group in the United Kingdom to form the British Motor Corporation.^[1] Following further corporate changes in the UK in the late 1960s, BMC Australia was absorbed into the newly established British Leyland Motor Corporation of Australia,^[1] the name of which became Leyland Motor Corporation of Australia in 1972,^[2] and then JRA Limited in March 1983.^[2]

In 1949, Austin purchased the Melbourne based Ruskin Body Works and used the factory to make ute and tourer bodies for fitting to imported Austin A40 chassis.^[3]

In 1947 Lord Nuffield purchased the former Victoria Park Racecourse, Sydney as the site for a car assembly plant.^[4][5] Nuffield Australia opened their new, 57-acre (23 ha)^[6] assembly and factory building in March 1950. The facility was initially set up to assemble Morris Minor and Morris Oxford models from CKD kits. Previously these cars were imported into Australia as assembled vehicles.^[7]

In 1954 the Austin Motor Company of Australia and Nuffield Australia merged to form British Motor Corporation (Australia) with the Nuffield facility at Victoria Park becoming the group headquarters of the new company. Austin and Morris vehicles were assembled at the facility and subsequently it was to be the design and manufacturing centre for BMC Australia.^[7]

During a period of significant postwar reconstruction, migrant assimilation and technical innovation, the factory employed a peak of 7,000 people from 35 nations. The only plant in Australia to manufacture the complete vehicle, it introduced to Australia the in-line transfer machining of engine blocks, the "rotodip" paint process, automatic conveyor assembly processes and major advances in just-in-time and flexible manufacturing concepts.^[8][9]

This factory produced the

.

In 1961 the Mini entered production in Australia as the Morris 850. The Mini proving very popular in Australia as it was in the UK. Its success prompted a revised Australian only model line up to be introduced in 1965, beginning with the Morris Mini Deluxe, the first to use Hydrolastic suspension, to have wind-up windows, ignition key operated starter and an improved level of trim and options. Australian Minis were fitted with wind-up windows years ahead of their UK counterparts. Morris Mini Coopers and Cooper S were also made and supplied to the Australian and New Zealand Police forces as high speed pursuit vehicles.^[10] The Mini K (for Kangaroo) was the renamed Deluxe MKII and launched in March 1969 complete with Kangaroo decals.^[11]

Released in 1962, the

. To add some Australasian brand confusion, in New Zealand the Austin Freeway was badged as a Morris Freeway and the Morris Mini Deluxe was badged as an Austin Se7en. All were made in the Sydney factory.

A local version of the

started in 1966 but fitted with larger, 13-inch wheels and longer rear wheel arms, than the UK original 10-inch.

A local version of the

for the de luxe hi-end model. In New Zealand these were also sold with Morris badging and some were assembled there.

In December 1966, a plant in

Leyland Motor Corporation of Australia

By 1969 BMC Australia's parent company had merged with the Leyland Corporation to form British Leyland^[1] and a merger in Australia saw the creation of the British Leyland Motor Corporation of Australia.^[2] BMC Australia continued to trade as a division of the new company^[13] but had been renamed the Austin Morris Division by 1970.^[14] The company name was changed yet again in 1972 when it became the Leyland Motor Corporation of Australia,^[2] with the Austin Morris Division carried across to the new company.^[15]

In 1973 the Morris Mini became the Leyland Mini^[16] and the Morris Mini Moke became the Leyland Moke. The Australian version of the Morris Marina, which had joined the range in 1972, became a Leyland Marina and was offered with a local market only six-cylinder 2,623 cc engine. Australian Marinas were also shipped as CKD assembly packs to New Zealand and South Africa, where the six cylinder engine was also offered.

The Australian big car model, which was intended to see out the 1970s, was the 1973 Leyland P76. This was designed to take a straight six or alloy Rover V8 engine; while the V8 variant was more popular and praised by the Australian motoring press, its availability was affected by limited supplies of that particular engine.

Following the worldwide collapse of British Leyland and its associates, linked with the reduction of import tariffs protecting car manufacturers in Australia (Chrysler, Ford and Holden), the Victoria Park Racecourse, Sydney factory, opened by Lord Nuffield in 1957 was closed by 1975. Production of the Mini from imported CKD shells was continued by Pressed Metal Corporation (PMC) in the Sydney suburb of Enfield until 1978 and the Moke until 1982. PMC also assembled Land Rovers, Hinos and pressed metal coffins.^[17]

Leyland of Australia then proceeded to assemble the Peugeot 505 (sedan and wagon) and import the Honda Quint, which was sold as the Rover Quintet locally.^[18][19]

In March 1983 Leyland Motor Corporation Australia ceased to exist and its place was taken by JRA Limited. The new company was organised into several divisions including Jaguar-Rover-Australia, Leyland Trucks and Leyland Bus Australia.

References

Further reading

• Cole, Lance (2017). "Chapter 15: Leyland's Antipodean Efforts". The Classic Car Adventure: Driving Through History on the Road to Nostalgia. Barnsley, England:
  ISBN 9781473896413
  .