Checksum

A checksum is a small-sized

data authenticity.^[1]

The procedure which generates this checksum is called a checksum function or checksum algorithm. Depending on its design goals, a good checksum algorithm usually outputs a significantly different value, even for small changes made to the input.^[2] This is especially true of cryptographic hash functions, which may be used to detect many data corruption errors and verify overall data integrity; if the computed checksum for the current data input matches the stored value of a previously computed checksum, there is a very high probability the data has not been accidentally altered or corrupted.

Checksum functions are related to

HMAC

.

error-correcting codes

are based on special checksums which not only detect common errors but also allow the original data to be recovered in certain cases.

Algorithms

Parity byte or parity word

The simplest checksum algorithm is the so-called longitudinal parity check, which breaks the data into "words" with a fixed number $n$ of bits, and then computes the bitwise exclusive or (XOR) of all those words. The result is appended to the message as an extra word. In simpler terms, for $n$ =1 this means adding a bit to the end of the data bits to guarantee that there is an even number of '1's. To check the integrity of a message, the receiver computes the bitwise exclusive or of all its words, including the checksum; if the result is not a word consisting of $n$ zeros, the receiver knows a transmission error occurred.^[3]

With this checksum, any transmission error which flips a single bit of the message, or an odd number of bits, will be detected as an incorrect checksum. However, an error that affects two bits will not be detected if those bits lie at the same position in two distinct words. Also swapping of two or more words will not be detected. If the affected bits are independently chosen at random, the probability of a two-bit error being undetected is $1/ n$ .

Sum complement

A variant of the previous algorithm is to add all the "words" as unsigned binary numbers, discarding any overflow bits, and append the

SAE J1708.^[4]

Position-dependent

The simple checksums described above fail to detect some common errors which affect many bits at once, such as changing the order of data words, or inserting or deleting words with all bits set to zero. The checksum algorithms most used in practice, such as Fletcher's checksum, Adler-32, and cyclic redundancy checks (CRCs), address these weaknesses by considering not only the value of each word but also its position in the sequence. This feature generally increases the cost of computing the checksum.

Fuzzy checksum

The idea of fuzzy checksum was developed for detection of

SpamAssassin, of co-operating ISPs, submits checksums of all emails to the centralised service such as DCC. If the count of a submitted fuzzy checksum exceeds a certain threshold, the database notes that this probably indicates spam. ISP service users similarly generate a fuzzy checksum on each of their emails and request the service for a spam likelihood.^[5]

General considerations

A message that is $m$ bits long can be viewed as a corner of the $m$ -dimensional hypercube. The effect of a checksum algorithm that yields an $n$ -bit checksum is to map each $m$ -bit message to a corner of a larger hypercube, with dimension $m + n$ . The $2 m + n$ corners of this hypercube represent all possible received messages. The valid received messages (those that have the correct checksum) comprise a smaller set, with only $2 m$ corners.

A single-bit transmission error then corresponds to a displacement from a valid corner (the correct message and checksum) to one of the $m$ adjacent corners. An error which affects $k$ bits moves the message to a corner which is $k$ steps removed from its correct corner. The goal of a good checksum algorithm is to spread the valid corners as far from each other as possible, to increase the likelihood "typical" transmission errors will end up in an invalid corner.

References

^ "Definition of CHECKSUM". www.merriam-webster.com. Archived from the original on 2022-03-10. Retrieved 2022-03-10.
^ Hoffman, Chris (30 September 2019). "What Is a Checksum (and Why Should You Care)?". How-To Geek. Archived from the original on 2022-03-09. Retrieved 2022-03-10.
^ Fairhurst, Gorry (2014). "Checksums & Integrity Checks". Archived from the original on April 8, 2022. Retrieved March 11, 2022.
^ "SAE J1708". Kvaser.com. Archived from the original on 11 December 2013.
^ "IXhash". Apache. Archived from the original on 31 August 2020. Retrieved 7 January 2020.

External links

Additive Checksums (C) theory from Barr Group
Practical Application of Cryptographic Checksums *A4 *US-Letter *US-Letter two-column
Checksum Calculator
Open source python based application with GUI used to verify downloads.

[1] "Definition of CHECKSUM". www.merriam-webster.com. Archived from the original on 2022-03-10. Retrieved 2022-03-10.

[2] Hoffman, Chris (30 September 2019). "What Is a Checksum (and Why Should You Care)?". How-To Geek. Archived from the original on 2022-03-09. Retrieved 2022-03-10.

[3] Fairhurst, Gorry (2014). "Checksums & Integrity Checks". Archived from the original on April 8, 2022. Retrieved March 11, 2022.

[4] "SAE J1708". Kvaser.com. Archived from the original on 11 December 2013.

[5] "IXhash". Apache. Archived from the original on 31 August 2020. Retrieved 7 January 2020.

[1]

[2]

[3]

[4]

[5]