Coordinated flight
In
When an aircraft is flying with zero sideslip a
Particular care to maintain coordinated flight is required by the pilot when entering and leaving turns.[2]
Advantages
Coordinated flight is usually preferred over uncoordinated flight for the following reasons:
- it is more comfortable for the occupants
- it minimises the drag force on the aircraft
- it causes fuel to be drawn equally from tanks in both wings
- it minimises the risk of entering a spin
Instrumentation
Glider pilots attach a piece of coloured string to the outside of the canopy to sense the
Axes of rotation
An airplane has three axes of rotation:
- Pitch – in which the nose of the airplane moves up or down. This is typically controlled by the elevatorat the rear of the airplane.
- Yaw – in which the nose of the airplane moves left or right. This is typically controlled by the rudder at the rear of the airplane.
- Roll (bank) – in which one wing of the airplane moves up and the other moves down. This is typically controlled by ailerons on the wings of the airplane.
Coordinated flight requires the pilot to use pitch, roll and yaw control simultaneously. See also flight dynamics.
Coordinating the turn
If the pilot were to use only the rudder to initiate a turn in the air, the airplane would tend to "skid" to the outside of the turn. [3]
If the pilot were to use only the
If the pilot were to fail to use the elevator to increase the angle of attack throughout the turn, the airplane would also tend to "slip" toward the lower wing.[1]
However, if the pilot makes appropriate use of the rudder, ailerons and elevator to enter and leave the turn such that sideslip and lateral acceleration are zero the airplane will be in coordinated flight. [3]
See also
References
- Clancy, L.J. (1975), Aerodynamics, Pitman Publishing Limited, London ISBN 0-273-01120-0
- Coordinated flight Retrieved on 2008-09-19