Cyrano radar family
The Cyrano radars are a family of French onboard radars, manufactured from the 1960s by the Compagnie Générale de la Télégraphie Sans Fil (CSF). These radars were originally used on the Mirage III C and Saab 35 Draken, and then in constantly evolving variants on different models of aircraft from Dassault Aviation and SEPECAT.
Cyrano I
The Cyrano I[1][2][3] was developed from 1958 for the French Air Force by CSF.
Components
The monopulse radar Cyrano I is located in the nose of the aircraft, in a pressurized enclosure. The antenna, with a diameter of 0.36 m, is movable in both
Cooling is provided by a circulation of water and glycol.
The radar has analog electronics responsible for processing the signal, telemetry, deviation measurements, antenna controls, as well as the navigation commands to the missiles before and after firing.
Capabilities
The radar is designed for the interception of bombers flying at high-altitude. It includes functions for detection, tracking, automatic navigation, missile guidance, and ground and contour mapping. It can help guiding when firing of 30mm DEFA and ADEN cannons,and guide the Matra R511 and R530 missiles, with a range adapted to the capabilities of these missiles.
References
- ^ "Les cigognes de Dijon". Flight International magazine. 5 September 1963. pp. 432–434.
- ^ Darricau & Blanchard 2002, p. 40-41
- ^ COMAERO 1, p. 71-72 and 79
- ^ Taylor, Phil. "Subminiature Tubes: The Future of Audio!". effectrode.com. Retrieved 10 December 2023.
Works cited
- Comité pour l'histoire de l'aéronautique (2000). L'électronique militaire. Vol. 1. Département d'histoire de l'armement du Centre des hautes études de l'armement. Archived from the original (pdf) on 17 February 2016. Retrieved 10 December 2023.
- Darricau, Jacques; Blanchard, Yves (November 2002). "Histoire du radar dans le monde puis en France, Partie 1" (pdf). Revue Pégase (107): 14–15.