EnDrain
Delphi | |
| Operating system | Microsoft Windows |
|---|---|
| Available in | English |
| License | Freeware |
| Website | EnDrain |
EnDrain is software for the calculation of a subsurface drainage system in agricultural land. The EnDrain program computes the water flow discharged by drains, the hydraulic head losses and the distance between drains, also obtaining the curve described by water-table level. Such calculations are necessary to design a drainage system in the framework of an irrigation system for water table and soil salinity control.[1]
Particulars
EnDrain is a model for a drainage equation. It offers the possibility to calculate drain spacing given the elevation of the water table or, alternatively, the elevation given the spacing. It can also calculate the hydraulic conductivity, given spacing and elevation.[2]
The program allows the utilization of three different soil layers, each of them with their own permeability and hydraulic conductivity (vertical and horizontal, anisotropy), one layer being above and two layers below drain level.[1]
The calculation of distances between drains and other parameters is based on the concept of the energy balance of groundwater flow and the hydraulic equivalent of Joule's law. For comparison, the classical concepts based on theories of Darcy and Dupuit are also used.[3]
See also
References
- ^ a b Rares HALBAC-COTOARA-ZAMFIR, 2010, Calculation of distance between drains using EnDrain program. Research Journal of Agricultural Science, 42 (3).
- ^ F.B. Reinders et al., 2016, Development of Technical and Financial Norms and Standards for Drainage of Irrigated Lands. South African Water Research Commission Project K5/2026//4 [1]
- ISBN 978-0-7923-3651-8 . On line : [3]