Flatbed trolley

Source: Wikipedia, the free encyclopedia.
For other uses, see Trolley.

A flatbed trolley a common form of freight transport in distribution environments, for moving bulk loads. Trolleys can aid in reducing effort required to move a load by allowing the user to pull or push instead of lift and carry.[1] A very simple design offers a basic flat platform with four casters and a fixed handle which is used to either push or pull the platform with the load on the platform. Without a flat surface it becomes an open frame trolley and without a handle it is a bogie or dolly.[2]

A flatbed trolley is also sometimes called a dray, but the term dray is also used to refer to a truck with no sides.[3]

Materials

The frame is usually fabricated steel. The primary flatbed surface can be constructed from wooden boards, plastic, steel or mesh. Flatbed casters can vary dramatically, made of solid rubber, air filled pneumatic or cast iron. The caster is generally the component on the flatbed trolley that limits the safe working capacity.

Types

There are many types of specialised trolleys, including:

Baggage trolley

Further information: Baggage cart

A baggage trolley is used to move baggage at an airport, railway station and a bus station.

Piano trolley

A piano trolley or piano dolly is a two- or four-wheeled trolley featuring a stronger-than-usual frame.

grand piano, the piano must be protected by a piano shoe
, a wooden frame which protects the polished surface and provides additional strength for the sides.

  • Removalists moving an upright piano with the a trolley and heavy straps connected to lifting harnesses
    Removalists moving an upright piano with the a trolley and heavy straps connected to lifting harnesses
  • Trolley used to carry a baby grand piano over steps
    Trolley used to carry a baby grand piano over steps

U-boat trolley

A U-boat trolley is used to move and stock

grocery stores
, and has two high handles on opposite ends of a narrow flatbed.

Balance trolley

Balance trolleys often have wheels mounted on a central axle to create a pivot point, operating in a similar fashion to a seesaw. These centrally mounted wheels allow the operator to rotate the trolley on a central axis, providing a turning circle no longer than the length of the trolley.

  • A balance trolley
    A balance trolley

Turntable trolley

The trolley shown below is termed a turntable trolley due to its steering mechanism. Unlike a flatbed trolley that is mounted on castors, turntable trolleys are mounted on solid axles which allows a much higher load capacity. The rear axles are fixed to the chassis, and the front wheels are attached to a steering mechanism that allows the trolley to be turned when moved.

  • Turntable trolley at a railway station
    Turntable trolley at a railway station

Remote controlled or autonomous trolley

Modern factory systems commonly track individual trolleys digitally to facilitate automated

remotely operated or autonomous trolleys for transport during storage and access.[5]

See also

References

  1. ^ "RAPP tool – pushing and pulling loads'". www.hse.gov.uk. Retrieved 2021-05-17.
  2. ISBN 978-0-240-80410-1
  3. ^ "Dray". Lexico Dictionaries English. Archived from the original on September 30, 2020. Retrieved 5 August 2020.
  4. ISSN 0032-4558
  5. ISBN 978-0-13-224085-7
Retrieved from "https://en.wikipedia.org/w/index.php?title=Flatbed_trolley&oldid=1220618347"