Model railroad layout

Source: Wikipedia, the free encyclopedia.
Part of an HO scale model railroad layout

In

basements
, or whole buildings.

Attention to modeling details such as

structures and scenery is common. Simple layouts are generally situated on a table, although other methods are used, including doors.[clarification needed
] More permanent construction methods involve attaching benchwork framing to the walls of the room or building in which the layout is situated.

Track layout

09
scale)

An important aspect of any model railway is the layout of the track itself. Apart from the stations, there are four basic ways of arranging the track, and innumerable variations:

  • Continuous loop. A circle or oval, with trains going round and round. Used in
    train sets
    .
  • Point to point. A line with a station at each end, with trains going from one station to the other.
  • Out and back. A pear shaped track, with trains leaving a station, going round a reversing loop, and coming back to the same station.
  • Shunting (US: Switching). Either a station, a
    shunting. This includes layouts which are built as a train shunting puzzle such as Timesaver and Inglenook Sidings

Common variations:

Station layout

Terminal station modeled on the East Texas Model Railroad Club HO-scale layout

There are three basic types of station, and sometimes combinations of these types:

  • Terminus or terminal station. As the name implies, all trains stop here, and then go back to where they came from.
  • Through station. Trains can go through this station; express trains don't stop, while local trains do stop briefly before continuing their journey.
  • Junction. The tracks diverge/join here.

Other factors which affect the track layout of a station include:

  • For passengers only, or for goods only, or for both passengers and goods.
  • Use of steam engines and/or diesel/electric engines.
  • Use of trains which can be driven from either end, e.g. Diesel Multiple Units.

The simplest possible station for passengers consists of just a platform beside the track, with no points (US:

sidings
. Both terminal and through stations can be as simple as this; a junction requires at least one point.

References

  • "Adventurous Model Railway Plans." A. Postlethwaite. . Basic configurations, page 9.
  • "Basic Model Railroading: Getting Started in the Hobby." Kent J Johnson.
    Kalmbach Publishing
    , 1998.
  • "Railway Modeling." N Simmons, 8th edition, . Planning the layout Chapter 5.
  • "Track Plans", C. J. Freezer. Peco Publications, 2nd edition.
  • Layout Design Special Interest Group see subpage: Design Primer/Introduction to the wide variety of layouts possible

External links