Plastic lumber
Plastic lumber is a
Manufacturers claim plastic lumber is more environmentally-friendly and requires less maintenance than wood/plastic composites or rot-resistant wood.
Production
Plastic lumber is composed of virgin or waste plastics including
Resin, regrind, and most of the additives are combined and processed in a pelletizing extruder. The new material pellets are formed in a mold and cooled.
Properties
Plastic lumber can be molded to meet almost any desired spatial condition, a major advantage over wood. It can also be bent and fixed to form strong arching curves. Plastic lumber works like wood - it can be shaped, drilled, and cut using conventional woodworking tools. At the same time, it is waterproof and resists all types of rot and mold, although it is not as rigid as wood and may slightly deform in extremely hot weather. Plastic lumber is not sensitive to staining from a variety of agents. A major selling point of this material is it doesn't need to be painted and is overall low-maintenance. It is manufactured in a variety of colors, and is widely available in grays and earth tones.
While the compressive properties of plastic lumber are equal or greater than those of wood, the modulus of elasticity is very low. Moreover, plastic lumber is subject to far more creep than wood.[5] Use in load-bearing structures requires different considerations from wood.[5]
Some plastic lumber, such as commercially available polyvinyl chloride plastic decking fiberglass composite lumber, outperformed composite wood plyetheline composite lumbers in fire safety performance.[3] Pure plastic lumber, without fiberglass composite structure, also deforms easily at high temperature; planning for the event of fire needs to take this into account.[5]
Standards
ASTM has standardized test methods to measure the properties of plastic lumber:[6]
- D 1929, Standard Test Method for Determining Ignition Temperature of Plastics, to address building code fire safety acceptance criteria;
- D 6108, Standard Test Method for Compressive Properties of Plastic Lumber and Shapes;
- D 6109, Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastic Lumber;
- D 6111, Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement;
- D 6112, Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes;
- D 6117, Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes;
- D 6341, Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140 °F (-34.4 and 60 °C);
- D 6435, Standard Test Method for Shear Properties of Plastic Lumber and Plastic Lumber Shapes; and
- E 108, Fire Tests of Roof Coverings, for fire safety performance testing.
Applications
Plastic lumber is used in such applications as:
- Deck floors
- Railings
- Fences
- Landscaping timbers
- Cladding and siding
- Park benches
- Molding and trim
- Window and door frames
- Industrial Cribbing
- Indoor and Outdoor garden furniture
- Marine Walls and Piling
See also
- Engineered wood
- Fiber reinforced composite
References
- ^ Nehls, Grace (2022-06-03). "Owens Corning acquires WearDeck, composite decking and structural lumber manufacturer". Composites World. Retrieved 2023-06-20.
- . Retrieved 17 February 2023.
- ^ CiteSeerX 10.1.1.472.8781.
- ^ Sturla, Brandon (2020-03-01). "Analyzing More Sustainable Alternatives Than Using Ordinary Portland Cement in Commercial Construction". Construction Management.
- ^ ISBN 978-1-4289-1323-3.
- )