ReplayGain
ReplayGain is a proposed
Although this de facto standard is now formally known as ReplayGain,[1] it was originally known as Replay Gain and is sometimes abbreviated RG.
ReplayGain is supported in a large number of
Operation
ReplayGain works by first performing a psychoacoustic analysis of an entire audio track or album to measure peak level and perceived loudness. Equal-loudness contours are used to compensate for frequency effects and statistical analysis is used to accommodate for effects related to time. The difference between the measured perceived loudness and the desired target loudness is calculated; this is considered the ideal replay gain value. Typically, the replay gain and peak level values are then stored as metadata in the audio file. ReplayGain-capable audio players use the replay gain metadata to automatically attenuate or amplify the signal on a per-track or per-album basis such that tracks or albums play at a similar loudness level. The peak level metadata can be used to prevent gain adjustments from inducing clipping in the playback device.[2]
Metadata
The original ReplayGain proposal specified an 8-
use their native tag formats with a specially formatted tag entry listing the track's replay gain and peak loudness.ReplayGain utilities usually add metadata to the audio files without altering the original audio data. Alternatively, a tool can amplify or attenuate the data itself and save the result to another, gain-adjusted audio file; this is not perfectly reversible in most cases. Some lossy audio formats, such as MP3, are structured in a way that they encode the volume of each compressed frame in a stream, and tools such as MP3Gain take advantage of this for directly applying the gain adjustment to MP3 files, adding undo information so that the process is reversible.
Target loudness
The target loudness is specified as the loudness of a stereo
Track-gain and album-gain
ReplayGain analysis can be performed on individual tracks so that all tracks will be of equal volume on playback. Analysis can also be performed on a per-album basis. In album-gain analysis an additional peak-value and gain-value, which will be shared by the whole album, is calculated. Using the album-gain values during playback will preserve the volume differences among tracks on an album.
On playback, listeners may decide if they want all tracks to sound equally loud or if they want all albums to sound equally loud with different tracks having different loudness. In album-gain mode, when album-gain data is missing, players should use track-gain data instead.
Alternatives
- Peak amplitude is not a reliable indicator of loudness, so consequently peak normalization does not offer reliable normalization of perceived loudness. RMSnormalization is more accurate but does not take into account psychoacoustic aspects of loudness perception.
- With dynamic range compression, volume may be altered on the fly on playback producing a variable-gain normalization, as opposed to the constant gain as rendered by ReplayGain. While dynamic range compression is beneficial in keeping volume constant, it changes the artistic intent of the recording.
- Sound Check is a proprietary Apple Inc. technology similar in function to ReplayGain. It is available in iTunes and on the iPod.[5]
- Standard measurement algorithms for broadcast EBU R128).[6] This new method has been used to measure loudness in newer ReplayGain utilities such as foobar2000 (since 1.1.6)[a] and loudgain.[b]
Implementations
| Name | Platforms | Can write | Ref. |
|---|---|---|---|
| AIMP |
|
Yes | [e] |
| Amarok |
|
Yes | [f] |
| Amberol | Linux | No | |
| Audacious |
|
No | [g] |
| Banshee |
|
Yes | [h] |
| beaTunes |
|
Yes | [i] |
| BTR Amp |
|
No | [j] |
| Clementine |
|
No | |
| cmus | Unix-like | Yes | |
| DeaDBeeF |
|
Yes | [k] |
| Exaile |
|
No | |
Ex Falso/Quod Libet |
|
Yes | [l] |
| foobar2000 |
|
Yes | [a] |
| JRiver Media Center |
|
Yes | [m] |
| JavaTunes |
|
No | |
| Kodi (software) |
|
No | |
| Lightweight Music Server | Yes | [n] | |
| Logitech Media Server |
|
Yes | |
| Loudgain |
|
Yes | [b] |
MAD/madplay |
|
Yes | |
| MediaMonkey |
|
Yes | |
| Mixxx[note 2] |
|
Yes | [o] |
mp3gain |
|
Yes | [p] |
| mpg123 |
|
No | |
| MPD |
|
Yes | |
| mpv |
|
No | |
| Muine |
|
No | [q] |
| MusicBee |
|
Yes | [r] |
| Nightingale |
|
No | [s] |
| PowerAMP |
|
No | |
| ProppFrexx ONAIR |
|
Yes | [t] |
| RadioBOSS |
|
Yes | |
| Rockbox |
|
Yes | |
| SoX |
|
Yes | |
| Vanilla Music |
|
No | |
| Vinyl Music Player |
|
No | |
| VLC media player | No | ||
| Winamp |
|
Yes | |
| XMPlay |
|
Yes | |
| Zortam Mp3 Media Studio |
|
Maybe[note 3] |
Streaming
See also
Notes
References
- ^ David Robinson (2010-12-17), ReplayGain Specification discussion, Hydrogenaudio, retrieved 2011-07-12
- ^ ReplayGain specification, retrieved 2011-04-15
- ^ "ReplayGain 1.0 specification", Hydrogenaudio Knowledgebase, retrieved 2023-09-17
- ^ Does Replay gain work differtly in Media monkey, Hydrogenaudio, 2010-10-07, retrieved 2010-12-30
- ^ Sam Costello, Using Sound Check with iPod, About.com, retrieved 2010-05-11
- ^ EBU (August 2011), Loudness normalisation and permitted maximum level of audio signals (PDF)
- ^ Ian Stewart (October 24, 2019), Mastering for Streaming Platforms: 3 Myths Demystified, iZotope, retrieved 2020-10-28
Media player features pages
- ^ a b "Foobar2000:Preferences:ReplayGain Scanner – Hydrogenaudio Knowledgebase", wiki.hydrogenaud.io
- ^ a b Hormann, Matthias C. (2024-01-04), loudgain, retrieved 2024-01-21
- ^ "Main features and Functions", AIMP for Windows, retrieved 2023-02-25
- ^ "Main features and functionality", AIMP for Android
- ^ [c][d]
- ^ Amarok 2.1 – back to the future, Padoca, 2009-02-15, retrieved 2010-12-30
- ^ "ReplayGain support (!100) · Merge requests · World / amberol · GitLab". GitLab. 2022-07-25. Retrieved 2024-03-15.
- ^ "YeOldeChangeLog", GitLab
- ^ beaTunes, retrieved 2023-08-29,
beaTunes allows you to perform the ReplayGain analysis and adjust the standardized, track-specific id3 tags
- ^ "BTR AMP v13.0 – Volume Normalization – ReplayGain and Sound Check", BTR Labs, 2022-04-07, retrieved 2023-04-06
- ^ "DeaDBeeF – The Ultimate Music Player", SourceForge, retrieved 2023-04-06
- ^ "Replay Gain", Quod Libet, retrieved 2023-04-06
- ^ "Replay Gain Adjustment", JRiverWiki, retrieved 2023-04-06
- ^ Poupon, Emeric, "Web player: Replaygain support", lms issues, no. 38, retrieved 2024-01-21
- ^ "Features", Mixxx, retrieved 2023-04-07,
Mixxx reads existing ReplayGain tags and analyzes songs that don't have them.
- ^ "MP3Gain", Sourceforge, retrieved 2023-04-07,
MP3Gain analyzes and adjusts mp3 files so that they have the same volume.
- ^ "updated TODO again, making the direction we're heading a bit clearer", GitLab, 2004-02-13
- ^ MusicBee 2.3, 2014-02-17
- ^ Giger, Martin, "Normalization?", Nightingale Forum, archived from the original on 2023-05-08, retrieved 2023-05-31,
there is no reference of it being loaded or written to the file
- ^ "Features", Qmmp, retrieved 2023-06-01,
ReplayGain scanner
External links
- ReplayGain specification
- ReplayGain at Hydrogenaudio wiki
- Replay Gain – A Proposed Standard, the original proposal, now out of date with respect to current practice
- Replay Gain in Linux — guide to using graphical and command line ReplayGain tools in Linux.