Active cable

Active Cables.

This section contains wording that promotes the subject in a subjective manner without imparting real information. Please remove or replace such wording and instead of making proclamations about a subject's importance, use facts and attribution to demonstrate that importance. (June 2013) (Learn how and when to remove this template message)

Active Cables And Charging Cables

Active cables are copper cables used for data transmission that use an electronic circuit to boost the performance of the cable. Without an electronic circuit, a cable is considered a passive cable. Passive cables are prone to data degradation from channel impairments, including attenuation, crosstalk, and group velocity distortion. In active cables, a circuit using one or several integrated circuits is embedded in the cable to compensate for some or all of these impairments. This active boosting allows cables to be more compact, thinner, longer, and to transmit data faster than passive cables.

Active cables are used in

.

Embedding circuitry in cables can allow for less copper to be used in cable production while still retaining performance, reducing the weight of the cable by as much as 80%, and reducing cable size. Other benefits include longer reach and lower power consumption.^[1][2]

Consumer Electronics That Can Be Charged

DisplayPort is the latest consumer electronics standard that has enabled support for active cables by allocating power supply pins inside the connector. Active DisplayPort cables enable ultra-thin (32 AWG and thinner) and long-reach interconnects which are particularly valuable for use with the miniature Mini DisplayPort form-factor.^[3]

Business Buildings And Hospitals

Active cables play an important role in enterprise and storage applications due to the confined space and air-flow requirements in

and the long reaches (typically up to 30 meters) required to make some of the rack-to-rack connections. Active cables can accommodate thin cable gauges and have a tighter bend radius, which can give cables in these applications more maneuverability and improve airflow.

As of 2010, half of

is driving the widespread adoption of active cables in this form-factor.

Standard Cables

• InfiniBand^[5]
• Serial Attached SCSI (SAS)^[6]
• DisplayPort^[7]
• PCI Express^[8]
• HDMI^[9]
• USB^[10]
• Thunderbolt^[11]

Criticism

Opponents of active cable technology often criticize the fact that the electronics in an active cable design could be placed inside the connected devices. Digital alternatives to using analog equalizers and impedance matching circuits to improve cable performance also exist, such as

.

Another criticism of active cables is that manufacturers may patent the electronics inside an active cable or even utilize on-chip cryptography to prevent competitors or consumers from producing their own replacement cables. Active cables typically cost 5 to 10 times more than passive cables.^[12] Some active cables are only produced by a single manufacturer, and sold through a single distributor. Low cable cost and high availability is desirable because cables are often inadvertently lost or damaged.

Some opponents of active cables also believe that active cables do not provide power savings for signal processing reasons; because in an active cable design, there is at least one extra integrated circuit (IC) compared to passive cable designs. This extra IC must be powered separately, when in a passive cable design, the signal processing can be integrated onto a single chip.^{[citation needed]}

See All Of The Other Parts Of This

References To This