Breit–Wheeler process

Source: Wikipedia, the free encyclopedia.
The Breit–Wheeler process is the creation of an electron–positron pair following the collision of two high-energy photons (gamma photons).
The nonlinear Breit–Wheeler process or multiphoton Breit–Wheeler is the creation of an electron-positron pair from the decay of a high-energy photon (gamma photon) interacting with a strong electromagnetic field such as a laser.

The Breit–Wheeler process or Breit–Wheeler pair production is a proposed physical process in which a positron–electron pair is created from the collision of two photons. It is the simplest mechanism by which pure light can be potentially transformed into matter. The process can take the form γ γ′ → e+ e− where γ and γ′ are two light quanta (for example, gamma photons).[1]

The multiphoton Breit–Wheeler process, also referred to as nonlinear Breit–Wheeler or strong field Breit–Wheeler in the literature, occurs when a high-energy probe photon decays into pairs propagating through a strong electromagnetic field (for example, a laser pulse).[2] In contrast with the linear process, this can take the form of γ + n ω → e+ e−, where n represents the number of photons, and ω represents the coherent laser field.

The inverse process, e+ e− → γ γ′, in which an electron and a positron collide and annihilate to generate a pair of gamma photons, is known as electron–positron annihilation or the Dirac process[3] for the name of the physicist who first described it theoretically and anticipated the Breit–Wheeler process.

This mechanism is theoretically characterized by a very weak probability, so producing a significant number of pairs requires two extremely bright, collimated sources of photons having

electron and positron rest mass energy. Manufacturing such a source, for instance, a gamma-ray laser, is still a technological challenge. In many experimental configurations, pure Breit–Wheeler is dominated by other more efficient pair creation processes that screen pairs produced via this mechanism.[2][4][5] The Dirac process (pair annihilation) has, on the other hand, been extensively verified. This is also the case for the multi-photon Breit–Wheeler, which was observed at the Stanford Linear Accelerator Center in 1997 by colliding high-energy electrons with a counter-propagating terawatt laser pulse.[6][7]

Although this mechanism is still one of the most difficult to be observed experimentally on Earth, it is of considerable importance for the absorption of high-energy photons travelling cosmic distances.[8][9][5]

The photon–photon and the multiphoton Breit–Wheeler processes are described theoretically by the theory of quantum electrodynamics.

History

The photon–photon Breit–Wheeler process was described theoretically by

John A. Wheeler in 1934 in Physical Review.[1] It followed previous theoretical work of Paul Dirac[3]
on antimatter and pair annihilation. In 1928, Paul Dirac's work proposed that electrons could have positive and negative energy states following the framework of relativistic quantum theory but did not explicitly predict the existence of a new particle.

Experimental observations

Photon–photon Breit–Wheeler possible experimental configurations

Although the process is one of the manifestations of the mass–energy equivalence, as of 2017, the pure Breit–Wheeler has never been observed in practice because of the difficulty in preparing colliding gamma ray beams and the very weak probability of this mechanism. Recently, different teams have proposed novel theoretical studies on possible experimental configurations to finally observe it on Earth.

In 2014, physicists at

Monte Carlo simulations suggest that this technique is capable of producing of the order of 105 Breit–Wheeler pairs in a single shot.[11][12]

In 2016, a second novel experimental setup was proposed theoretically[4] to demonstrate and study the Breit–Wheeler process by colliding two high-energy photon sources (composed of non-coherent hard x-ray and gamma-ray photons) generated from the interaction of two extremely intense lasers on solid thin foils or gas jets. The forthcoming short-pulse extremely intense lasers, laser interaction with solid target will be the place of strong radiative effects driven by the nonlinear inverse quantum scattering. This effect, negligible so far, will become a dominant cooling mechanism for the extremely relativistic electrons accelerated above the 100 MeV level at the laser-solid interface via different mechanisms.

Multiphoton Breit–Wheeler experiments

The multiphoton Breit–Wheeler process has already been observed and studied experimentally. One of the most efficient configurations to maximize the multiphoton Breit–Wheeler pair production consists on colliding head-on a bunch of gamma photon with a counter-propagating (or with a slight collision angle, the co-propagating configuration being the less efficient configuration) ultra-high intensity laser pulse. To first create the photons and then have the pair production in an all-in-one setup, the similar configuration can be used by colliding GeV electrons. Depending on the laser intensity, these electrons will first radiate gamma photons via the so-called non-linear inverse Compton scattering mechanism when interacting with the laser pulse. Still interacting with the laser, the photons then turn into multiphoton Breit–Wheeler electron–positron pairs.

This method was used in 1997 at the Stanford Linear Accelerator Center. Researchers were able to conduct the multi-photon Breit–Wheeler process using electrons to first create high-energy photons,[13] which then underwent multiple collisions to produce electrons and positrons, all within the same chamber.[6][7][14] Electrons were accelerated in the linear accelerator to an energy of 46.6 GeV before being sent head-on into a Neodymium (Nd:glass) linear polarized laser of intensity 1018 W/cm2 (maximal electric field amplitude of around 6×109 V/m), of wavelength 527 nanometers and duration 1.6 picoseconds. In this configuration, it has been estimated that photons of energy up to 29 GeV were generated. This led to the yield of 106 ±14 positrons with a broad energy spectrum in the GeV level (peak around 13 GeV).

The aforementioned experiment may be reproduced in the future at SLAC with more powerful laser technologies. The use of higher laser intensities (1020 W/cm2) is now easily achievable with short-pulse titanium-sapphire laser solutions that would significantly enhance process efficiencies (inverse nonlinear Compton and nonlinear Breit–Wheeler pair creation) leading to several orders of magnitude higher antimatter production, enabling higher-resolution measurements, additional mass-shift, as well as nonlinear and spin effects.[15]

The extreme intensities expected to be available in future multi-petawatt laser systems will allow all-optical, laser–electron collision experiments where the electron beam is generated from direct laser interaction with a gas jet in a so-called laser wakefield acceleration regime. The resulting electron bunch is then made to interact with a second high-power laser in order to study QED processes. The feasibility of an all-optical multi-photon Breit–Wheeler pair production scheme has first been proposed theoretically in [16] Implementation of this scheme is restricted to multi-beam short-pulse extreme-intensity laser facilities such as the CILEX-Apollon[17] and ELI systems[18] (CPA titanium sapphire technology at 0.8 micrometer, duration of 15–30 femtoseconds). The generation of electron beams of few GeV and few nanocoulomb is possible with a first laser of 1 petawatt combined with the use of tuned and optimized gas-jet density profiles such as two-step profiles. Strong pair generation can be achieved by colliding head-on this electron beam with a second laser of intensity above 1022 W/cm2. In this configuration at this level of intensity, theoretical studies predict that several hundreds of pico-Coulombs of antimatter could be produced.[19] This experimental setup could even be one of the most prolific positron yield factory. This all-optical scenario may be preliminary tested with lower laser intensities of the order of 1021 W/cm2.

In July 2021 evidence consistent with the process was reported by the

vacuum birefringence was also studied obtaining evidence enough to claim the first known observation of the process.[20][21][22]

See also

References

  1. ^
    doi:10.1103/PhysRev.46.1087
    .
  2. ^
    S2CID 118532838
    .
  3. ^
    S2CID 122633558
    .
  4. ^
    S2CID 42770145
    . Direct production of electron–positron pairs in two-photon collisions, the Breit–Wheeler process, is one of the basic processes in the universe. However, it has never been directly observed in the laboratory because of the absence of intense enough γ-ray sources
  5. ^
    S2CID 119275572
    .
  6. ^
    ISSN 1550-7998
    .
  7. ^
    ISSN 0094-243X
    .
  8. OSTI 4836265
    .
  9. doi:10.1103/PhysRev.155.1404
    .
  10. ^ a b "Scientists discover how to turn light into matter after 80-year quest". Phys.org. 18 May 2014. Retrieved 24 July 2015.
  11. S2CID 121658592
    .
  12. S2CID 123676974
    .
  13. PMID 10060879. Archived from the original
    on 2019-06-21. Retrieved 2019-06-21.
  14. ^ Akshat Rathi (19 May 2014). ""Supernova in a bottle" could help create matter from light". Ars Technica. Retrieved 20 May 2014.
  15. arXiv:1404.0810 [hep-ph
    ].
  16. S2CID 6777106
    .
  17. doi:10.1016/j.nima.2013.10.090
    .
  18. ISSN 1541-3721
    .
  19. doi:10.1103/physrevaccelbeams.20.043401
    .
  20. S2CID 236906272
    .
  21. ^ "Collisions of Light Produce Matter/Antimatter from Pure Energy". Brookhaven National Laboratory. Retrieved 2021-10-10.
  22. ^ "Colliding photons were spotted making matter. But are the photons 'real'?". Science News. 2021-08-09. Retrieved 2021-09-02.


Retrieved from "https://en.wikipedia.org/w/index.php?title=Breit–Wheeler_process&oldid=1195415800"