Canadian Phase I

The Canadian Phase I is a Canadian powered parachute that was designed and produced by Canadian Powered Parachutes of Vegreville, Alberta, introduced in 2000.^[1]

Design and development

The aircraft was designed to comply with Canadian

The aircraft is built from bolted-together aluminium tubing. Inflight steering is accomplished via foot pedals that actuate the canopy brakes, creating roll and yaw. On the ground the aircraft has lever-controlled nosewheel steering. The main landing gear incorporates shock absorber-type suspension. The standard canopy supplied was the Quantum Advantage High Performance of 500 sq ft (46 m²) area. This canopy provides a cruise speed of 30 to 35 mph (48 to 56 km/h) and a payload of 510 lb (230 kg). A larger canopy of 550 sq ft (51 m²) that provides a slower cruise speed of 25 to 30 mph (40 to 48 km/h), a slower stall speed, a higher rate of climb and a payload of 610 lb (280 kg) was also available.^[1]

Factory optional equipment included a windshield, snow skis for winter operations, electric starting, a canopy-monitoring mirror and an agricultural aircraft kit.^[1]

Specifications (Phase I with Quantum Advantage High Performance wing)

Data from Cliche^[1]

General characteristics

• Crew: one
• Capacity: one passenger
• Wing area: 500 sq ft (46 m²)
• Empty weight: 290 lb (132 kg)
• Gross weight: 800 lb (363 kg)
• Fuel capacity: 10 U.S. gallons (38 L; 8.3 imp gal)
• Powerplant: 1 ×
  two-stroke, liquid-cooled aircraft engine
  , 64 hp (48 kW)
• Propellers: three-bladed Powerfin

Performance

• Cruise speed: 35 mph (56 km/h, 30 kn)
• Rate of climb: 700 ft/min (3.6 m/s)

References