High Peak Trail

Coordinates: 53°08′24″N 1°44′09″W / 53.1401°N 1.7357°W / 53.1401; -1.7357 (High Peak Trail)
Source: Wikipedia, the free encyclopedia.

High Peak Trail
Dowlow
Hurdlow
Parsley Hay
Tissington Trail
 A515 
Newhaven Tunnel
(
47 m
51 yd
)
Friden
 A5012 
Minninglow
Limestone Way
Harboro' Rocks
Hopton Tunnel
(
418 m
457 yd
)
Middleton Top & engine house
Black Rocks
High Peak Junction
Cromford Canal
Sources[1]
Looking down Sheep Pasture Incline
The trail at Middleton Incline
The cycle-hire centre at Parsley Hay on a busy August weekend
The trail passing under the A515 at Newhaven Tunnel
The trail at Minninglow

The High Peak Trail is a 17-mile (27 km) trail for walkers, cyclists and horse riders in the Peak District of England. Running from Dowlow (53°12′21″N 1°50′06″W / 53.2059°N 1.8349°W / 53.2059; -1.8349 (High Peak Trail (Dowlow trailhead))), near Buxton, to High Peak Junction, Cromford (53°06′01″N 1°32′07″W / 53.1004°N 1.5354°W / 53.1004; -1.5354 (High Peak Trail (High Peak Junction trailhead))), it follows the trackbed of the former Cromford and High Peak Railway, which was completed in 1831 to carry minerals and goods between the Cromford Canal wharf at High Peak Junction and the Peak Forest Canal at Whaley Bridge.[2][3]

Closure of the line occurred during the

Beeching era
, with the first section of the line closing in 1963 (i.e. the Middleton Incline) followed by full closure in 1967.

In 1971 the Peak Park Planning Board and Derbyshire County Council bought the largest part of the trackbed and, in partnership with the Countryside Commission, adapted it for its current leisure use. The trail has a crushed limestone surface which makes it ideal for all users, including wheelchair use, assisted by level access onto the trail at various points along its route.

The High Peak Trail is now a national route of the National Cycle Network.

The elevated nature of the trail (the highest part of the line is at Ladmanlow, at a height of 1,266 ft or 386 m) affords many splendid views across the countryside. However, these higher sections can also be very exposed in poor weather. The original railway incorporated a number of inclines at its northern and southern ends, and whilst much of the trail is fairly level, these sections are naturally steeper.

At

branch line to Ashbourne. The High Peak Trail crosses the Limestone Way near Harboro' Rocks.[4]

The High Peak Trail (and part of the Tissington Trail) are also designated part of the

.

The High Peak Trail forms part of the White Peak Loop Trail, a 60-mile (97 km) route for walking, cycling and horse riding in the Peak District. It links the High Peak Trail with the Monsal Trail, with linking sections through the towns of Buxton, Bakewell and Matlock. The White Peak Loop is being developed by Derbyshire County Council and as of 2020 some sections are not yet complete.[5]

Access and facilities on the trail

See also

References

  1. ^ "Peak District National Park - Visit High Peak Trail". Retrieved 29 March 2020.
  2. ^ "High Peak Trail". Sustrans. Retrieved 29 March 2020.
  3. ^ "High Peak trail". Peak District National Park. Retrieved 29 March 2020.
  4. ^ "The Limestone Way Walker's Guide" (PDF). Visit Peak District. February 2007. Retrieved 16 August 2020.
  5. ^ "White Peak Loop". Derbyshire County Council. Retrieved 29 March 2020.

External links

53°08′24″N 1°44′09″W / 53.1401°N 1.7357°W / 53.1401; -1.7357 (High Peak Trail)