Lubuge Dam
| Lubuge Dam | |
|---|---|
Francis-type | |
| Installed capacity | 600 MW |
The Lubuge Dam (
Background
In June 1981, the Government of the People's Republic of China approved the project. Construction on the dam began in 1982 and the river was diverted on 15 November 1985. On 21 November 1988, the dam began to impound the reservoir and the first generator was commissioned on 27 December 1988. The second was commissioned in 1989 and the third in 1990. The fourth and final generator went online on 14 June 1991. The entire project was complete on 31 December 1991. A US$141.4 million World Bank loan helped fund the dam and power station. It was the first World Bank loan for the power sector in China.[1]
Design
The 101 m (331 ft) rock-fill dam creates a reservoir with a storage capacity of 110,000,000 m3 (89,000 acre⋅ft). To control floods, the dam has three spillways. The main is an intake hold behind the dam with a discharge capacity of 6,424 m3/s (226,900 cu ft/s). The second is a tunnel on the left bank of the dam with a capacity of 1,995 m3/s (70,500 cu ft/s). Finally, the third spillway is tunnel on the right back with a capacity of 1,658 m3/s (58,600 cu ft/s). To produce power water is sent to an underground power station downstream through a 9.4 km (5.8 mi) long headrace tunnel. The power station contains four 150 MW Francis turbine-generators for a total installed capacity of 600 MW. [2]
See also
References
- ^ a b "Project Completion Report – China - Lubuge Hydroelectric Project" (PDF). World Bank. 22 November 1993. Retrieved 8 June 2014.
"This was the first Bank loan to the power sector in China." - PDF Page 3 (Memorandum)
- ^ "Lubuge power plant technical characteristics of hydropower units" (PDF) (in Chinese). Dongfang. June 1992. Retrieved 8 June 2014.