South African type MP tender

The South African type MP tender was a steam locomotive tender.

Type MP tenders entered service in 1929, as tenders to the

Type MP tenders were built in 1929 by Swiss Locomotive and Machine Works in Winterthur.^[1]

The

The tender had a coal capacity of 9 long tons 4 hundredweight (9.3 tonnes), a water capacity of 4,250 imperial gallons (19,300 litres) and a maximum axle load of 12 long tons 17 hundredweight 2 quarters (13,080 kilograms).[2]^[3]

Locomotive

Only the 36 Class 19A locomotives were delivered new with Type MP tenders, which were numbered for their engines in the range from 675 to 710. An oval number plate, bearing the engine number and often also the tender type, was attached to the rear end of the tender.^[1][3]

Classification letters

Since many tender types are interchangeable between different locomotive classes and types, a tender classification system was adopted by the SAR. The first letter of the tender type indicates the classes of engines to which it could be coupled. The "M_" tenders could be used with the locomotive classes as shown below, although in some cases engine drawbars and intermediate emergency chains had to be replaced or adjusted to suit the target locomotive.^[3]

• Class 12, Class 12A and Class 12B.
• Class 14, Class 14A and Class 14B.
• Class 15 and Class 15A.
• Class 16, Class 16A, Class 16B and Class 16C.
• Class 19, Class 19A, Class 19B, Class 19C and Class 19D.
• Class 20.
• Class 24.
• Class MC1, Class MH and Class MJ.
• Class S2.

The second letter indicates the tender's water capacity. The "_P" tenders had a capacity of 4,250 imperial gallons (19,300 litres; 5,100 US gallons).^[3]

A number, when added after the letter code, indicates differences between similar tender types, such as function, wheelbase or coal bunker capacity.^[3]

References