Dodge Viper: Difference between revisions

Source: Wikipedia, the free encyclopedia.
Browse history interactively
← Previous editNext edit →
Content deleted Content added
VisualWikitext
m Reverted edits by 67.208.247.130 (talk) to last version by VX1NG
Line 188: Line 188:
{{-}}
{{-}}


== Fifth generation/SRT Viper (2012–) ==
== Fifth generation/SRT Viper, VX (2012–) ==
{{Infobox automobile
{{Infobox automobile
| name = Fifth generation, SRT Viper
| name = Fifth generation, SRT Viper

Revision as of 17:36, 4 November 2012

Dodge Viper
Front mid-engine, rear-wheel drive
Powertrain
Engine8.0 L (488 cu in) – 8.4 L (513 cu in) Chrysler V10
Transmission6-speed manual

The Dodge Viper (renamed '

New Mack Assembly in 1991 and moved to its current home at Conner Avenue Assembly
in October 1995.

Although Chrysler considered ending production because of financial problems,[1][2] chief executive Sergio Marchionne announced and showed on September 14, 2010 a new model of the Viper for 2012.[3] All Vipers are V10 powered with a manual transmission.

The Viper was initially conceived in late 1988 at Chrysler's Advanced Design Studios. The following February, Chrysler president Bob Lutz suggested to Tom Gale at Chrysler Design that the company should consider producing a modern Cobra, and a clay model was presented to Lutz a few months later. Produced in sheet metal by Metalcrafters,[4] the car appeared as a concept at the North American International Auto Show in 1989. Public reaction was so enthusiastic, that chief engineer Roy Sjoberg was directed to develop it as a standard production vehicle.

Sjoberg selected 85 engineers to be "Team Viper," with development beginning in March 1989. The team asked the then-Chrysler subsidiary Lamborghini to cast some prototype aluminum blocks based on Dodge's V10 truck engine[citation needed][5][6] for sports car use in May. The production body was completed in the fall, with a chassis prototype running in December. Though a V8 engine was first used in the test mule, the V10, which the production car was meant to use, was ready in February 1990.

Official approval from Chrysler chairman Lee Iacocca came in May 1990. One year later, Carroll Shelby piloted a pre-production car as the pace vehicle in the Indianapolis 500 race. In November 1991, the car was released to reviewers with first retail shipments beginning in January 1992.

First generation RT/10 (1992–1995)

First generation Viper RT/10
Curb weight
3,284 lb (1,490 kg)

The first prototype was tested in January 1989. It debuted in 1991 with two

Stealth because of complaints from the United Auto Workers
, and went on sale in January 1992 as the RT/10 Roadster.

The centerpiece of the car was its

pushrod
two-valve design, while adequate for the truck application, was unsuitable for a performance car and suggested a more comprehensive redesign which would have included four valves per cylinder. Chrysler, however, was uncertain about the Viper's production costs and sales potential and so declined to provide the budget for the modification.

The engine weighed 711 lb (323 kg) and produced 400 bhp (300 kW) at 4600 rpm and 465 lb⋅ft (630 N⋅m) at 3600 rpm, and thanks to the long-gearing allowed by the engine, provided fuel economy at a

Louisville Slugger
baseball bat." Despite this, in straight line performance, it completed a quarter mile (402 m) in 12.6 seconds and had a maximum speed of over 150 mph (240 km/h). Its large tires allowed the car to average close to 1 lateral g in corners, placing it among the elite cars of its day. However, the car proved tricky to drive at high speeds, particularly for the unskilled.

The car was spartan, although it featured inflatable lumbar support and adjustable seats. Along with the absence of exterior door handles, the vehicle lacked side windows and a roof. Although a soft top cover was available, it was designed primarily for indoor vehicle storage. Side curtains of fabric and clear plastic operated by zippers could be inserted into the door and hand-bolted when needed. All of these decisions were made to reduce weight. The battery is located in the sealed compartment over the rear wheel well to increase rear-end weight and traction. The car shipped with a tonneau cover and video tape on soft-top assembly (the soft top is removable and folds to fit in the trunk). In 1994 A/C was added as an option.

Performance

Second generation, Phase II SR (1996–2002)

Second generation, Phase II SR Viper RT/10, GTS
Overview
Also calledChrysler Viper (Europe)
Production1996–2002
Body and chassis
Body style2-door roadster
2-door coupe
Powertrain
Engine7.998 L (488.1 cu in) V10 OHV 415 bhp (309 kW; 421 PS)
(Viper RT/10 1996–1997 only)
450 bhp (336 kW; 456 PS)
(Viper GTS 1996–2002)
(Viper RT/10 1998–2002)
Transmission6-speed manual
Dimensions
Wheelbase96.2 in (2,440 mm)
Length175.1 in (4,450 mm) (1996–99 RT/10)
176.4 in (4,480 mm) (2000–02 RT/10)
176.7 in (4,490 mm) (GTS)
Width75.7 in (1,920 mm)
Height44.0 in (1,120 mm) (RT/10)
47.0 in (1,190 mm) (GTS)

A coupe model called the GTS was introduced in 1996. Dubbed "double bubble", the roof featured slightly raised sections above each seat to accommodate usage of helmets, a throwback to its intended purpose. Vipers can be seen participating often in drag racing and road racing. The GTS, like its predecessor, was chosen as the pace car for the 1996 Indianapolis 500.

Despite its similar outward appearance, the car was distinct enough to be considered a new generation model.[

Porsche 911 Turbo, Acura NSX-T, Mitsubishi 3000GT, and the Toyota Supra
in all performance exercises except braking. The car not only placed last, but had considerably longer stopping distances than other vehicles. ABS was introduced further into the production run, though braking performance was not necessarily significantly improved. In a Sports Car International comparison conducted in 2002, the Viper ACR (with ABS) was compared to the 911 GT2 at Thunderhill Raceway Park. Both cars were very capable, and quick around the test track, but the Viper proved more difficult to drive, and the braking system was blamed very specifically for the gap in lap times (approximately GT2: 2 minutes, ACR: 2:04) between the two cars.

Along with the updated performance came the inclusion of some of the "luxuries" the car did without before. Dual front airbags were added to the vehicle's safety equipment list in 1996 on the GTS and 1997 on the RT/10 as mandated by the government. The car was also exported to Europe, where it was rebadged as a Chrysler, and sold under this marque from 1997 to 2003. European models had a detuned version of the Viper V10.

In the first six years of production almost 10,000 Vipers were sold. Minor evolutionary changes including new 18" diameter wheels and tires were introduced in the 1999 model. Subsequent versions featured light-weight

hypereutectic pistons
and an improved exhaust system, side exhaust having been dropped part way through production year 1996 for the RT/10; all production GTS Viper Coupes had rear exit exhaust. 1999 saw the introduction of the Cognac Connolly leather interior package. Continuing the refinements, ABS was introduced in 2001. In 2002, the end of second generation production was celebrated with the release of 360 commemorative "Final Edition" models. These models were painted red with white stripes, paying tribute to the famous race-winning Oreca cars. The RT/10 was replaced by the SRT-10 in 2003 and the GTS was replaced in 2006 by the SRT-10 Coupe.

Performance (GTS) (RT/10 from 1998 - 2002)

Dodge Viper second generation, phase II SR

Third generation ZB (2003–2008)

Third generation Viper SRT-10
Curb weight
3,380 lb (1,530 kg)
See also: Street and Racing Technology

The Dodge Viper underwent a major redesign in 2003, courtesy of DaimlerChrysler's

MSRP US$
3000. 200 Mambas were produced.

The Viper SRT-10 Coupe was introduced at the 2005

Detroit Auto Show as a 2006 model. It shares many of its body panels with the convertible, but takes its side and rear styling from the Competition Coupe. The coupe looks much like the previous Viper GTS and retains the "double-bubble" roof shape of the original along with the original GTS's tail lights, as well as offering the original GTS Blue with white stripes paint scheme on the initial run of First Edition cars like the original Viper coupe. The engine is SAE
-certified to produce 510 bhp (380 kW) and 535 lb⋅ft (725 N⋅m). Unlike the original coupe, the chassis was not modified. This makes the coupe heavier than the convertible, and thus slightly slower to accelerate. Handling and high-speed performance are improved by the coupe's stiffer frame, reduced drag, and increased downforce.

No 2007 model Vipers were produced; instead, Chrysler extended production of the 2006 model while preparing the updated 2008 model.

Performance

Viper 8.3L Engine

Dodge Viper third generation (SRT-10 roadster)[10]

  • 0-60 mph (97 km/h): 3.9 sec
  • 0-100 mph (160 km/h): 8.36 sec
  • quarter mile: 11.77 sec @ 123.68 mph (199.04 km/h)
  • top speed: 189.5 mph (305.0 km/h)
  • slalom: 70.4 mph (113.3 km/h)
  • skidpad average acceleration: 1.05 g (10.3 m/s2)
  • 100–0: 274 ft (84 m)

Dodge Viper third generation (SRT-10 coupe)

  • 0-60 mph (97 km/h): 3.8 sec
  • 0-100 mph (160 km/h): 8.36 sec
  • quarter mile: 11.77  sec @ 123.68 mph (199.04 km/h)
  • top speed: 192.6 mph (310.0 km/h)
  • slalom: 70.4 mph (113.3 km/h)
  • skidpad average acceleration: 1.05 g (10.3 m/s2)
  • 100–0: 274 ft (84 m)

Fourth generation, Phase II ZB (2008–2010)

Fourth generation, Phase II Viper SRT-10
Curb weight
3,460 lb (1,570 kg) (base)
3,408 lb (1,546 kg) (ACR)

In 2008, with the introduction of the 510 cu in (8.4 L) V10, the Viper produced 600 bhp (450 kW) at 6000 rpm and 560 lb⋅ft (760 N⋅m) at 5100 rpm, and also received better flowing heads with larger valves, Mechadyne cam-in-cam

Ricardo Consulting Engineers
. Electronic engine control is developed by Continental AG; the controller can monitor the crankshaft and cylinder position up to six times during each firing and has 10 times more processing power than the previous unit.

Changes outside of the engine were less extreme. The Tremec T56 transmission was replaced with a new Tremec TR6060 with triple first-gear synchronizers and doubles for higher gears. The Dana M44-4 rear axle from the 2003–2006 model now has a GKN ViscoLok speed-sensing limited-slip differential that greatly helps the tires in getting grip under acceleration. Another performance upgrade was the removal of run-flat tires; the new Michelin Pilot Sport 2 tires increased grip and driver feedback and, along with revised suspension (springs, anti-roll bars, and shock valving), made the Viper more neutral in cornering.

The modifications made to the 2008 model year car were enough for Chrysler to make it distinct from the first SRT-10, and the 2008 model became known as Gen IV,[

Corvette ZR1
. Another notable change is the reworking of the exhaust system; previous third-generation Vipers had their exhaust crossover under the seats which resulted in a large amount of heat going into the cockpit, which was done initially to help improve the car's exhaust note, since the first 2 generations of Viper, which had no crossover, were criticized for their lackluster exhaust notes. The 2008 Viper exhaust utilized a new exhaust system with no crossover, reducing the heat that enters the cockpit.

The electrical system was completely revised for 2008. Changes included a 180-amp alternator, twin electric cooling fans, electronic throttles, and completely new VENOM engine management system. CAN bus architecture has been combined with pre-existing systems to allow for regulatory compliance. The fuel system was upgraded to include a higher-capacity fuel pump and filtration system.[12]

Audi R8, and similar cars. According to Car and Driver and Motor Trend
, the car's slightly adjusted suspension setup and new differential gave it cornering ability as sharp as before with better control, feedback, and response.

On November 4, 2009, Dodge Car Brand President and CEO Ralph Gilles had announced that the Viper would end production in the summer of 2010.[14]

On February 10, 2010, Dodge began accepting orders for the Viper SRT10 "Final Edition" models. Only 50 of these units will be produced (20 coupes, 18 roadsters and 12 ACRs). "Final Edition" cars carried the special build code, "AXZ", and were to be the very last of the Viper cars. "Final Edition" Vipers were available in SRT10 Coupe and Convertible configurations.[15]

July 1, 2010 brought about the then-end of production for the Generation 4 Dodge Viper. During an event hosted by Dodge and the Viper Club of America, the final production Gen 4 Viper, which was given a gold finish and accentuated by contrasting orange stripes, rolled off the assembly line and was presented before attendees of the ceremony. Its completion commemorated the end of the production run of the Gen 4 Viper.[16]

Performance (2008 base model)

The 8.4 Viper V10 Engine with dual throttle bodies/intake manifolds and 600 hp

Dodge Viper fourth generation, phase II

  • 0–60 mph (0–97 km/h): 3.4 sec [13]
  • 0–100 mph (0–161 km/h): 7.6 sec [13]
  • quickest quarter mile: 10.92 sec @ 127.79 mph (205.66 km/h) [17]
  • top speed: 202 mph (325 km/h)
  • slalom: 74.2 mph (119 km/h)+
  • skidpad average acceleration: 1.06 g (10.4 m/s²)
  • 100–0 mph (161–0 km/h): 270 ft (82 m)

Fifth generation/SRT Viper, VX (2012–)

Fifth generation, SRT Viper
Curb weight
3,354 lb (1,521 kg) (Viper model)
3,297 lb (1,495 kg) (Viper model with SRT Track Package)
3,431 lb (1,556 kg) (Viper GTS model)
3,374 lb (1,530 kg) (Viper GTS model with SRT Track Package)

History

At a dealer conference on September 14, 2010 in Orlando, Florida, Chrysler Group and Fiat CEO Sergio Marchionne was reported[19][20] to have concluded his remarks by unveiling a rolling 2012 Dodge Viper prototype to dealer applause. There would be no 2011 Viper. Key quotes from the Detroit News piece from SRT CEO Ralph Gilles that hint to the future of the brand include:

  • "The new Viper is not based on anything else".
  • "The Viper cabin is very rearward and the hood is very long. Few cars in the industry are designed with those proportions anymore."
  • "I want the new Viper to be a more forgiving car to drive and accessible to more people. We've never had stability control on a high-performance car, which is about to happen on the new car."

The Viper was also on display for one night only in Salt Lake City, UT at the 11th Viper Owners Invitational or VOI 11 from September 30, 2010 (2010-09-30) to October 3, 2010 (2010-10-03). Ralph Gilles was present gathering feedback from the owners themselves on new exterior design of the snake. The Generation 5 badge was unveiled as well at this event on each dining table in the enormous hall.

In Autumn of 2011, Ralph Gilles announced that the Gen V Viper would debut at the New York Auto Show in April 2012.[21]

Public unveiling

Preliminary specifications include following:

All-aluminum 8.4-liter V-10 rated 640 horsepower (477 kW; 649 PS) and at 600 lb⋅ft (813 N⋅m), it has the most torque of any naturally aspirated engine in a street legal production car, Tremec TR6060 six-speed manual transmission with final drive ratio 3.55, 50 percent improvement in torsional stiffness over previous model, electronic stability control, traction control, 4-channel anti-lock brake system (ABS), carbon fiber and aluminum skin with .364 drag coefficient (Cd), Pirelli P Zero Z-rated tires, 4-piston Brembo brakes with fixed-aluminum calipers with vented 355x32mm diameter rotors, 20 mm lower seating position, 7-inch full-color customizable instrument cluster, Uconnect RA3 or RA4 Access in-vehicle connectivity system with optional SiriusXM Travel Link, Harman Kardon audio system, bi-xenon projector headlamps with white light-emitting diode (LED) daytime running lamps and LED turn signals, LED taillamps with integrating stop-and-turn illumination and snakeskin texture lens, five-spoke forged aluminum "Rattler" wheel with fully polished (standard), fully painted Hyper Black or fully painted low-gloss black finishes. It will be the first to feature Vipers third logo, nicknamed "Stryker".

SRT Viper GTS includes leather upholstery, accented colors in seats, doors, center console and stitching; Gun Metal trim on cluster bezel, HVAC outlets, window switch bezels, shifter base, park brake bezel and the integrated passenger grab handle on the center console; Sabelt racing seats with Kevlar/fiberglass shell, carbon-fiber hood, roof, decklid and aluminum door panels, split six-spoke forged aluminum "Venom" wheel with polished face with graphite-painted pockets (standard), fully painted Hyper Black or fully painted low-gloss black finishes.[22]

Optional SRT Track Package includes Pirelli P Zero Corsa tires, StopTech slotted two-piece rotors, ultra-lightweight wheels in Hyper Black or matte black finishes.

The 2013 SRT Viper was unveiled at the 2012 New York Auto Show.[23] [24]

SRT Viper GTS-R (2013-)

It is a race car designed for the GT class of the American Le Mans Series, designed and built by SRT Motorsports and Riley Technologies. It includes Michelin GT tires.

The vehicle was unveiled at the 2012 New York Auto Show.

The SRT Viper Racing team entering 2012 ALMS included Dominik Farnbacher, Marc Goossens, Ryan Hunter-Reay, Tommy Kendall, Jonathan Bomarito and Kuno Wittmer.[25]

Production

SRT Viper will be built in the Conner Avenue Assembly Plant in Detroit, MI with production beginning in late 2012.[26]

Marketing

As part of Chrysler's plan of turning Street and Racing Technology as a separate vehicle brand within Chrysler Group LLC, the SRT Viper became the brand's halo vehicle.[27]

Europe

The second generation, phase II SR Vipers were exported to Europe, where they were sold as Chryslers.

The third generation, phase I ZB Viper was being sold in Europe during 2005–2006, the first model to be sold as a Dodge, as part of Chrysler's new sales strategy for the European market. In the United Kingdom it is referred to as a Viper, but it is actually sold as the Dodge SRT-10, as the Viper name is a registered trademark in the UK.[28] Prodrive currently handles the importation and modification of Vipers to meet European laws.

Features

The all-new 2013 SRT Viper will be the most technologically-advanced Viper ever. It finally features a cruise control and controls on the steering wheel.

HD radio. A built-in HDD for storing music and photos JPEG and MP3
will also be included as standard equipment.

Variants

Viper GTS R Concept (2000)

Viper GTS R Concept
Overview
ProductionPrototype (only one was made)
Body and chassis
Curb weight
3,254 lb (1,476 kg)

Ten years after the first Viper Concept was revealed, the 2000 GTS-R concept continued the legacy of the V10 Viper. Osamu Shikado was responsible for the vehicles exterior which is 3 inches lower and 2 inches wider than the production Viper at the time. Shikado used race inspired lines with an aggressive stance to create the most striking viper to date. Some of these design cues, to a lesser extent, have been lended to the 2003 production Viper.

Said Shikado: We gave the body a strong profile with higher belt line, dramatic side gill, 'bump-up' rear fender shape and a more defined side crease. Seen from above, the race-inspired front-to-rear stripe now is tapered for a more dynamic appearance.

Unline most concepts, the 2000 Viper Concept was made as a complete car. It features a complete functional interior with air conditioning, adjustable pedals and a premium sounds system. Such functionality, combined with the most aggressive race-inspired styling make the 2000 GTS-R Concept the most desirable Viper to date. Only one example was made.

Ten years after the original Viper concept was unveiled, some Chrysler engineers went to work with a V10 truck engine and a simple chassis. Three years later the Coupe appeared and the car has gone on to become a proper modern day muscle car in the US, and a successful racer in GT series in Europe, including impressive displays of durability at Le Mans. The Dodge Viper GTS/R concept keeps the spaceframe, aluminium suspension, 8.0 litre aluminum V-10 engine and high-performance six-speed manual gearbox used in the current Viper. However, like the race cars, this version has a dry-sumped engine producing five hundred horsepower, up fifty from the current road cars. Torque is also hits the magic 500 lb-ft.

Race Inspired

Le Mans was the inspiration for this concept car - the GTS/R - unveiled at the Detroit Motor show. A ‘street legal, race inspired concept car’. The use of the term ‘concept’ seems a little misplaced as there seems little doubt that a limited edition will be produced. Many of the changes are inspired by endurance racing and it’s probably not too far off the mark to suggest this car will go into limited production to satisfy FIA homologation rules.

One Piece Body

The body is a single moulding of carbon-fibre, but with some subtle changes compared with the existing cars. An inch and a half has been taken out between the sill and the roof, which together with a chassis sitting two inches lower, gives the car a much lower profile. Three inches have been added to the wheelbase and two inches to the track, making an already sizable car into a huge beast. The doors have also been lengthed, which combined with the longer wheelbase makes entry and exit from the car that much easier - important for endurance racing driver changes. Fourteen-inch ventilated disc brakes with four-piston calipers all-around will bring the car to a halt, whilst the 19-inch wheels with P285/30 ZR Goodyear tires up front and 20-inch rear wheels with P335/30 ZR tyres hit the tarmac.

Viper GT2

In order to meet

lb·ft (678 N·m) of torque. They had bodywork with similar appearance to the GTS-R, with the same color scheme, aerodynamics package, and visual options, in order to publicize the Viper's achievement in the FIA GT Championship.[29]

Viper ACR

The back of the Dodge Viper ACR at the 2009 North American International Auto Show.

The American Club Racing (ACR) model was introduced in 1999. This model had suspension and engine enhancements focused on maximizing performance in road racing and autocross environments. Horsepower was, by the use of K&N air filters and smooth intake tubes, bumped to 460 hp (370 kW) in these models, while torque increased to 500 lb·ft (678 N·m). Weight was reduced by over 50 pounds (23 kg) by stripping the interior and removing other non-essential items such as the fog lamps (replacing them with brake ducts). The new stiffer, adjustable suspension removed another 14 pounds (6.4 kg) These models, which also have engine and handling modifications, has an "ACR" badge and 20-spoke BBS wheels.

A new ACR was added to the Viper line-up after the 2008 model year. Its upgrades were more drastic than the original, including street-legal racing tires, two-piece brake rotors, adjustable suspension, and significant aerodynamic revision. No engine modifications were made, so power and torque remain at 600 hp (450 kW) and 560 lb·ft (760 N·m) as in the standard SRT-10. The ACR is street-legal, and is similar to the MOPAR Viper that Dodge displayed at various auto shows. Weight was also decreased by 40 lb (18 kg) by using the "Hardcore Package", without AC, radio, speakers, amplifier, trunk carpet, hood pad or tire-inflator. Its aerodynamic upgrades produce about 1200

kN
) of down-force at 150 mph (240 km/h), or roughly 10 times the downforce the standard Viper SRT-10 can produce at the same speed. The interior was upgraded only by the addition of a beacon-tripped lap timer (Hardcore Edition Only).

The Viper ACR was built alongside the standard SRT-10 at the Conner Avenue plant in Detroit. The aerodynamic components were produced by Plasan Carbon Composites and assembled to the vehicle by Prefix Corporation located in Rochester Hills, Michigan.[30]

On September 14, 2011, on the Nürburgring Nordschleife, a 2010 Dodge Viper SRT10 ACR captured the fourth fastest production car lap record with a 7:12.13 elapsed time.[31]

Viper ACR-X

To commemorate the end of the second generation Viper and mend the gap from the car's production end until the release of the new car, Dodge offered an improved version of the ACR specifically designed to run in the Dodge Viper Cup Series. This car, named Viper ACR-X, added to the basic ACR 40 hp (30 kW), a new set of downforce-enhancing front canards, and new materials that, along with a stripped interior, reduced weight to 3,300 lb (1,500 kg). It is a purpose-built race car, and is not street-legal. According to Dodge, the car beat the regular record-holding ACR around Laguna Seca by about three seconds (1:33.9 to 1:31). Price increased by US$12,000, to $110,000. Production was planned for the spring of 2010.[32] As of February 17, the Viper ACR-X's Nürburgring lap record is 7:03.058, a full 9.072 seconds faster than the regular ACR.[33]

Mopar Concept Coupe

Detroit Auto Show

A prototype 2008 Mopar Viper Coupe, with 675 hp (503 kW), appeared at the 2007 North American International Auto Show, but is not planned for production. This concept appears to have been a sneak peek at the Viper ACR. Performance parts from this car are sold by Mopar.

SRT-10 Carbon

For the 2003 SEMA show, Chrysler displayed a highly tuned Viper SRT-10 in coupe form. The vehicle's name comes from the carbon fiber used to reduce the weight by 150 lbs (total down to 3200 lbs). However, even more significant were the engine modifications, which increased power to 625 hp; no torque or RPM figures were given. Along with the carbon fiber hardtop, a front splitter and rear spoiler were added, however these parts were not nearly as significant as those on the later SRT-10 ACR, and no downforce/drag information was provided to show that they were even functional. The car was a concept only, and never produced.[34]

Firepower

Main article: Chrysler Firepower

The Chrysler Firepower was a grand touring concept based on the Viper chassis that would have been equipped with the Hemi V-8, with automatic transmission. Price would have been slightly lower than other models.

Copperhead

Dodge Copperhead
Main article: Dodge Copperhead

The Dodge Copperhead was a concept car based on the Viper platform that was intended as a cheaper, more agile car. It was powered by a 220 hp 2.7 L V6 engine instead of the Viper's V10. It never reached production. Dodge produced a limited-production Copperhead Edition Dodge Viper, with copper-colored paint similar to the concept car and other changes.

Zagato Alfa Romeo TZ3 Stradale

Designed by

carbon fiber body. As planned, only 9 vehicles will be built.[35]

Recognition

References

  1. ^ Hellwig, Ed (2010). "Mercedes-Benz SLS Started Out as the Next-Generation Dodge Viper". Retrieved 19 July 2010. {{cite web}}: Unknown parameter |month= ignored (help)
  2. ^ Emunds, Dan (2010). "Dodge Viper Production Ends". Retrieved 19 July 2010. {{cite web}}: Unknown parameter |month= ignored (help)
  3. ^ Boudette, Neal E.; Bennett, Jeff (September 15, 2010). "To Counter Slump, Chrysler Plans New-Model Barrage". The Wall Street Journal. p. B3.
  4. ^ Lamm, Michael. "The American Carrozzeria". The Auto Channel. Retrieved 17 May 2012.
  5. ^ Comer, Colin (2008). "Fangs for the Memories" (PDF). Sports Car Market. www.colinsclassicauto.com. Retrieved 17 May 2012. {{cite journal}}: Unknown parameter |month= ignored (help)
  6. ^ "Brief Description of the Viper Generations" The Viper Store. Retrieved: 3 May 2012.
  7. ^ "Vehicle Table". Fueleconomy.gov. 2006-09-10. Retrieved 2010-09-29.
  8. ^ a b "A history of the Dodge Viper from concept to current generation". Edmunds.com. Retrieved 2010-09-29.[dead link]
  9. ^ a b c d e "1997 Dodge Viper GTS – American Car – Motor Trend Magazine". Motortrend.com. 1997-05-01. Retrieved 2009-11-23.
  10. ^ a b c d "2006 Dodge Viper Specifications". Retrieved 2007-09-25. Cite error: The named reference "viper505" was defined multiple times with different content (see the help page).
  11. ^ a b c "Dodge Specs & Upgrades [2008 Viper]". Chrysler. Retrieved 2008-05-02.
  12. ^ "First Look: 2008 Dodge Viper Coupe and Convertible". Motor Trend. Retrieved 2008-06-18.
  13. ^ a b c Gillies, Mark (2007). "2008 Dodge Viper SRT10 Coupe and Convertible – Short Take Road Test". Car and Driver.com. Retrieved 2012-03-18. {{cite web}}: Unknown parameter |month= ignored (help)
  14. ^ Ross, Jeffrey N. (2009-11-04). "Dodge Car Brand CEO Confirms End of Viper Production". Autotropolis.com. Retrieved 2009-11-04.[dead link]
  15. ^ Korzeniewski, Jeremy (2010-04-06). "Dodge slithers out new 2010 Viper Final Edition models — Autoblog". Autoblog.com. Retrieved 2010-05-22.
  16. ^ [dubious – discuss] "The Last Dodge Viper Rolls off the Line". DragTimes.com. 2010-07-02. Retrieved 2010-07-02.
  17. ^ Phillips, Drew (2009-03-25). "One Quick Snake: Stock 2008 Dodge Viper runs 10-second quarter mile". Autoblog.com. Retrieved 2009-07-17.
  18. ^ "2013 SRT Viper driveSRT". Street and Racing Technology. Chrysler. Retrieved 2 April 2012.
  19. ^ Lavrinc, Damon (2010-09-15). "Marchionne shows 2012 Dodge Viper at dealer meeting". Autoblog.com. Retrieved 2010-09-30.
  20. ^ "2012 Dodge Viper confirmed, Chrysler IPO expected in 2011". Kelly's Blue Book. 2010-09-20. Retrieved 2010-10-02.
  21. ^ "Viper Club of America: 2013 SRT Viper Debut Set". Retrieved 2012-03-18.
  22. ^ "2013 Dodge SRT Viper GTS". trendzcar.com. Retrieved 2012-04-06.
  23. ^ "2013 SRT Viper: The Snake Is Back!".
  24. ^ "2013 SRT Viper bites back with 640 HP, returns to racing [w/video]".
  25. ^ "2013 SRT Viper coils up to take a bite out of ALMS with GTS-R competition model".
  26. ^ "Dodge No More: 2013 Model Will Be Branded, Sold As SRT Model". Retrieved 2012-01-21.
  27. ^ "New 2013 Viper to inaugurate independent SRT brand". Retrieved 2012-01-21.
  28. ^ "Dodge SRT-10 Car Reviews". evo. 2004-11-24. Retrieved 2010-09-29.
  29. ^ "?special Dodge Vipers – Viper GT2 and ACR". Allpar.com. Retrieved 2010-09-29.
  30. ^ Batt, Ron (2008-04-28). "04/28/2008 – Prefix Delivers First Viper ACR". Prefix Corporation. Retrieved 2008-05-05.
  31. ^ Chrysler Group LLC (2008-04-28). "09/27/201 – Dodge Viper SRT10 ACR Reclaims Production Car Lap Record at Nurburgring With 7:12.13" (Press release). PRNewswire. Retrieved 2012-03-18.
  32. ^ Batt, Ron (2009-12-10). "Dodge Reveals Viper SRT10 ACR-X Turn-Key Racer; Hits Tracks Next Summer". Retrieved 2009-12-12.
  33. ^ Phillips, Drew (2012-02-22). "SRT's race-only Viper ACR-X laps Nürburgring in 7:03.058". Retrieved 2012-02-22.
  34. ^ Batt, Ron (2009-09-15). "Dodge Viper SRT-10 Carbon". Retrieved 2010-05-14.
  35. ^ "A Dodge Viper ACR inside the Alfa Romeo's body, Zagato TZ3 Stradale". Retrieved 16 May 2011.
  36. ^ "Best 10, Worst 10 Cars for Repair Costs". Yahoo.com. Bankrate.com. 2008-09-05. Retrieved 2008-09-06.
  37. ^ "25,000 Vipers Loose on the Streets". Reuters. 2008-03-12. Retrieved 2008-07-07.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Dodge_Viper&oldid=521383042"