VT1000
The VT1000 was a monochrome
Apparently unhappy with these VT1000s, DEC released the VT1300 at the same time as the 1200. This was essentially a cut-down diskless version of the VAXstation 3100 Model 30, allowing the X Window System code to be downloaded from the host system. An upgraded version of the VT1300 that allowed the host to download programs to the terminal to run them locally was the VTX2000, a concept DEC called an "X workstation".
History
Concept
The VT1000 family developed out of a 1987 study carried out by DEC's VIPS group. They studied the use of existing graphics-capable workstations, and found that the vast majority of their users were simply using the workstation to maintain several terminal sessions to a host computer. This was wasting the majority of the power of the workstation, which cost tens of thousands of dollars. This led to a 1987 project to design a system more suitable to the tasks the users were actually doing, bringing standardized graphics to the users that might actually be used, and lowering the hardware complexity so a basic terminal user might consider buying one.[1]
Development
The team rejected using one of their single-chip
Having experimented with an X Server on the
The team decided early on to use a custom
This decision had a number of spin-off effects. It was desirable to have the system be able to do local setup and terminal emulation even when not connected to a host computer, which led to the requirement for a basic
VT1300
While the original design was being worked on, the team had to constantly tune the software for maximum performance. This led to continual ROM updates, causing considerable problems. This led to increasing interest in a RAM-based machine that booted from the network, reversing their earlier decision. In 1989 development along these lines started using the
Description
The VT1000 and VT1200 was packaged in a pizza box case with the monitor normally sitting on top and an LK400 series keyboard connected to it using a coiled cord and 4-pin modular connector. The three-button mouse was roughly puck-shaped, not unlike the original iMac mouse, and used a custom 7-pin round connector. The back panel included a coax connector for the monitor, mouse and keyboard ports, a Modified Modular Jack (MMJ) serial port for a printer, another MMJ serial port for host connections, and a thinwire Ethernet connector. It also included AC in and out connectors, the latter used to connect the monitor, allowing it to be turned on and off with the terminal using a single switch located on the side of the case beside the power connectors. The system supported a number of monochrome monitors, selected using a rotary switch beside the monitor port.[7]
In addition to X Window support, the VT1000 and VT1200 could also emulate DEC's previous text terminals in individual windows, including support for the
The VT1300 was packaged into a much larger case, about the size of a contemporary full-sized
Notes
- ^ The terms client and server under X terminology are reversed from normal usage: the server normally runs on the end-user machine, which is normally referred to as the client in other cases.
References
Citations
- ^ Engberg & Porcher 1991, p. 28.
- ^ a b Engberg & Porcher 1991, p. 30.
- ^ a b Engberg & Porcher 1991, p. 31.
- ^ Engberg & Porcher 1991, p. 32.
- ^ "VT1300 Terminal" (PDF). Digital. 1990. Retrieved 2021-11-01.
- ^ Engberg & Porcher 1991, p. 33.
- ^ DEC 1991, pp. 2–3.
- ^ DEC 1991, p. 7.
- ^ Marshall, Martin (9 April 1990). "DEC Introduces Line of X Window Displays". InfoWorld: 46.
- ^ Engberg & Porcher 1991, p. 26.
- ^ "VT1300 Works (Almost) Like a Workstation". Computerworld: 19. 17 December 1990.
Bibliography
- Engberg, Björn; Porcher, Thomas (Fall 1991). "X Window Terminals" (PDF). Digital Technical Journal: 26–35.
- VT1000 / VT1200 and DECimage 1200 Service Guide (PDF) (Technical report). Digital Equipment Corporation. April 1991. EK–V1000–SV.002.